Thanks for the video. I have one concern , though. Is T-7000 glue still soft/flexible when cured? I googled T-7000 and it says it is black epoxy resin. Epoxy resin is permanent and hard, so that you can never open the phone again afterwards. Is this true or are there different types of T-7000 glue?
Never tested it before, the problem is not the extra 1000mah because it will just take a little bit to charge or discharge.. not a big deal, the big deal is if it fits inside the same place or you need a new bigger back door.
I bought a battery from Ali Express and installed it a while ago. I noticed a good difference since my device had not been opened or the battery changed before.
I followed the steps and at first my Poco boot up after I was finished, but then it turned off again and won't turn back on. Tried reconnecting the cables and then it turn back on, then off again.
Awesome video... My Poco is only running at 80% according to Accu Battery 🔋 app... My Poco is still mint condition and I don't want a new phone... I now know I can keep it 🙏
Hello!! Yes it still supports Fast charging with its original ac adapter!! I have one since the day 1 and I replaced the battery 7 months a go and it still works with super fast charging!!!
@@2TECH Hi! I got some questions and I hope you could answer these: 1. Can you operate this without a heating device? 2. Without a glue.. (what's the odds w/ and w/o it?) 3. What's the proper way with the newly replaced battery? (Should it be more hours than full charge for 1st cycle? like 5-12 hrs even already full?) 4. How many cycles before the common/usual charge apply? 5. Will charging with fast charge affect first time use with its calibration or it doesnt matter? I knew it should be lesser than 20% and not more than 80% at most anyway after the calibration so I hope you could comprehend with the questions.
Well changed the battery easily, turns on but screen is now dead, no boot just background noises as if it is actually running even message notification sounds. Screen is 100% fucked. Edit: I damaged the screen connector when removing one of the screws which was hidden by sticker. Phone is kill.
@@andyacevedo237 Claro que puedes!!! Para hacerlo no necesitas mucha experiencia sino PACIENCIA Y LUZ, un pedazo de radiografía, un poco de alcohol, un destornillador pequeño y una batería nueva. Me puedes también seguir en @tecnowiki01.
@@2TECH yes with a suitable heat source. I first had to order one and now wait 3 weeks for it^^I will never use a heat mat like that again, so I decided to use a temperature-controlled hot air gun, I somehow have more use for it
Thanks for the video. I have one concern , though. Is T-7000 glue still soft/flexible when cured? I googled T-7000 and it says it is black epoxy resin. Epoxy resin is permanent and hard, so that you can never open the phone again afterwards. Is this true or are there different types of T-7000 glue?
up
What kind of screw used in that phone so Ill go buy some tools fpr that before opening my device.
you will need a 1.5 phillip screwdriver and some pieces of plastic, the same that was used in Xrays, you can use alcohol or heat from a blower
I just follow the video. It's easy and simple. For the heat i use a hair dryer. Thanks a lot!! 👍👌
How about not charging
can poco x3 pro use 6000mAh battery? the original factory version use 5000mAh battery😬..
have you tested it out?
Never tested it before, the problem is not the extra 1000mah because it will just take a little bit to charge or discharge.. not a big deal, the big deal is if it fits inside the same place or you need a new bigger back door.
U can use 6000! It work.
Thanks man for video , was helpful
Where can I purchase the original xiaomi bn57 battery?
I bought a battery from Ali Express and installed it a while ago. I noticed a good difference since my device had not been opened or the battery changed before.
@@Mohamad.he06 Can you paste the link here i also want to change the battery
Deberías quitar el fex del centro de carga para no dañarlo
Can the poco x3 pro battery, which comes with a capacity of 5160, be changed with the poco x3, with a capacity of 6000? And install it on poco x3 pro
Yea same question here and can the display also be replaced with amoled? (Poco x3 pro)
@@KurozawaOfficialyyu better not try these things
Yes you can.
What's the pad that the phone is on ?
I don´t understand you.
I followed the steps and at first my Poco boot up after I was finished, but then it turned off again and won't turn back on. Tried reconnecting the cables and then it turn back on, then off again.
My phone unable to charge after changing new battery. Is it because I place the sticker wrongly?
Did you solve it?
Do you lose any data? I have passwords and photos I'd like to keep but can't transfer them off
no, it's just the power supply
@@ramonedrozojr.768thanks for the reply, my mind is at peace now, thank you
hi my phone got damaged after falling. I want to fix it myself. where can i buy phone back cover opener?
can you operate this without a heating device and without a glue?!
Yes totally
Awesome video... My Poco is only running at 80% according to Accu Battery 🔋 app... My Poco is still mint condition and I don't want a new phone... I now know I can keep it 🙏
Great 👍
Same here i still want my poco f2 pro until it lasts!!
Did it still support turbo charging aftwr battery replacement or not, or it depends on the battery?, plz reply
Hello!! Yes it still supports Fast charging with its original ac adapter!! I have one since the day 1 and I replaced the battery 7 months a go and it still works with super fast charging!!!
@@2TECH Hi! I got some questions and I hope you could answer these:
1. Can you operate this without a heating device?
2. Without a glue.. (what's the odds w/ and w/o it?)
3. What's the proper way with the newly replaced battery? (Should it be more hours than full charge for 1st cycle? like 5-12 hrs even already full?)
4. How many cycles before the common/usual charge apply?
5. Will charging with fast charge affect first time use with its calibration or it doesnt matter?
I knew it should be lesser than 20% and not more than 80% at most anyway after the calibration so I hope you could comprehend with the questions.
Price?
No need to glue at their camera's area?
How long should I wait after glued it?
No need to glue camera area, if you use T7000 I recommend 3 hours, but if you are desesperated you can do it in 2 or 1 hour.
@@2TECH what about the excess glue that oozes out? should i wipe it? or wait until the glue dries
Well changed the battery easily, turns on but screen is now dead, no boot just background noises as if it is actually running even message notification sounds. Screen is 100% fucked. Edit: I damaged the screen connector when removing one of the screws which was hidden by sticker. Phone is kill.
Hi, did you punch it with the screwdriver? In this video i never touch screen connector or flex :(
@@andyacevedo237 Claro que puedes!!! Para hacerlo no necesitas mucha experiencia sino PACIENCIA Y LUZ, un pedazo de radiografía, un poco de alcohol, un destornillador pequeño y una batería nueva. Me puedes también seguir en @tecnowiki01.
Lol my bad :/ that socks.
Vai atR price kt the pare❤❤
Very good tutorial, thanks.
Thank god i don't need to remove the screen
after doing this any water can harm the phone ?
yes, unless you put new glue on it before you put it back together
@@Simon-jh1hf thank you
Забыл проклеить вокруг камеры,но назаметку взят процес👍
Thank you!
The pull tabs broke😭
How to remove excessive glue from seams?
Use dry cloth
Where to buy legit battery
Where to get battery?
ebay
San po Kong bumili Ng battery Nyan?
Thanks
no chance, I can't get it open lol.
Is soo easy :D
@@2TECH yes with a suitable heat source. I first had to order one and now wait 3 weeks for it^^I will never use a heat mat like that again, so I decided to use a temperature-controlled hot air gun, I somehow have more use for it
Nice
Niceee
Thanks 🤗
So hard... I am retard, I have to buy new phone, LOL. I love my Poco x3 NFC< but i can not replace by myself XD.
Is so easy.... I know that you can do it, with calm, a plastic card and alcohol, im very very very sure!!
Kitna amount lage ga chnge me battery?