took me over an hour to thread that needle without luck.... finally I had an idea that actually worked! I used tweezers to hold thread then thru the needle! it worked, took me less than 30 seconds!
Thank you for this video I just made my first two stitches \ following this video and I am so excited, I am a male wig maker but I have been hand making for a while now and I just bought a sewing machine to try it out. They don't look perfect but I am happy that at least l could do it!🫶🏾
I found one in the thrift store for $10. Some of the stuff was missing.But they were a easy cheap find. This is GREAT FOR BEGINNERS. It's brand new.Thus video helped me,but my bobbin tends to act up for some reason. But UA-cam UNIVERSITY will help me. Thanks for this video.❤
Thank you very much. I just got this machine and your video is great, you have answered and shown everything I needed to know. I love your video instructions..
Hi, thank you for this! I just started using mine, but I just bent my needle🥴I looked up other videos about needles and none of them were updated. If it’s not asking too much, would you do a video for replacing needles on this sewing machine? If you want😊 I appreciate you for just making this video lol i needed it!
Its very easy to replace, turn the little nob near the needle turn in towards the back to loosen, pull down the needle it comes right off and place the new one. Once you done it turn the nob towards you to tighten and you're all set
Mine keeps jamming and coming out of the eye of the needle, the bobbin thread is working perfectly. It works great for about two seconds and then makes a load sound and the top thread comes out. I have no idea what’s wrong with it and it’s brand new.
Thank you sooooo much I am so happy I found this video I practiced as I watched took a few times not perfect but it’s better than before cant wait to be a pro
I got everything up to "the hole of the bobbin thread that come up" I am not seeing a hole to put the thread. My needle thread is attached to the bobbin thread but there is no hold to thread the needle thread through to pull both of them to the back my bobbin thread is still coming out the from of the bobbin cover. Is this correct?
This was super helpful but I did have some trouble with putting the thread through the eye of the needle! Otherwise I just need to get over my fear of the fast stitching 😂😂
Machine is new I only had it 3 weeks I was using it and it lifting came off the thing that looks like a a fork thing that comes down on the clothes the whole piece came off I want to know how to put it back on well who should I call what should I do it's brand-new that's crazy
Well I just got this for my birthday April 5th and this is the first time I'm trying to use it and the piece that holds the material that looks like a fork it came off this is crazy I don't know what to do or how to get it back on I want to talk to somebody I want my money back oh I did tear the damn tape
Don't even know what that little pieces called the piece that comes down and holds the clothes that looks like a Fork it came out I was sliding the material under there and I pulled the lever down for the thing to hold material and it came off what should I do
There’s a great video on another channel about how to correct when the bobbin thread won’t catch. Seems like it’s a common problem for this machine, but it’s an easy fix.
Is it just mines or ? My machine is missing the bar that’s by her needle when doing the last few steps.. this is my first time using a machine, send help please 🥺
I think it’s called “a removable finger guard” (another video said it) do I need it? I followed all the steps until the end and now I’m stuck trying to finish threading
Question: I replaced the bobbin because I ran out of thread, and my problem now is I cannot pull out the thread from the bobbin. What seems to be the problem?
This has happened to me before. You may have a knot. Try unraveling the thread until you find the area that is tangled. You may need to cut the thread to allow it to move freely.
the video is great but the part after u put the thread they the needle is a little foggy… this is where i can not follow from. if u can pls help in a clearer way i would beyond be so grateful!!
If you are having trouble threading your bobbin, you may need to start over. This can be a little tricky if you are first trying it out. In the beginning of this video is the step by step guide on how it is done. ❤️
Using the same color thread as machine bobbin is not helpful you can't differtiate thread from bobbin...after watching carefully a few times bobbin and needle aren't synced
took me over an hour to thread that needle without luck.... finally I had an idea that actually worked! I used tweezers to hold thread then thru the needle! it worked, took me less than 30 seconds!
You are amazing and hilarious. We would be friends craft monster! Thanks for sharing, this swim suit isn’t going to sew itself.
Great instructions👌 Thanks 🙏
Thank you for this video I just made my first two stitches \ following this video and I am so excited, I am a male wig maker but I have been hand making for a while now and I just bought a sewing machine to try it out. They don't look perfect but I am happy that at least l could do it!🫶🏾
I found one in the thrift store for $10. Some of the stuff was missing.But they were a easy cheap find. This is GREAT FOR BEGINNERS. It's brand new.Thus video helped me,but my bobbin tends to act up for some reason. But UA-cam UNIVERSITY will help me. Thanks for this video.❤
Thank you for this well explained and practical tutorial. I had fears, and you make it seem so easy.
thank you SO MUCH for the time stamps. :)
Best tutorial. I've been going thru other videos, by far the best. Thank you!
Thank you very much. I just got this machine and your video is great, you have answered and shown everything I needed to know. I love your video instructions..
Great instruction video! Thank you!
Great video! I always refer back to this video for all my M1000 needs 😊
Thank you very much the instruction book that it came with leaves something to be desired
This was very helpful. Thank you so much.
Thanks for sharing.
Your hair is beautiful. What do you call them curls??? I want to get that done.
Hi, thank you for this! I just started using mine, but I just bent my needle🥴I looked up other videos about needles and none of them were updated. If it’s not asking too much, would you do a video for replacing needles on this sewing machine? If you want😊 I appreciate you for just making this video lol i needed it!
Stay tuned for that video in the near future! Thanks for watching!!😉
Its very easy to replace, turn the little nob near the needle turn in towards the back to loosen, pull down the needle it comes right off and place the new one. Once you done it turn the nob towards you to tighten and you're all set
.AA
Mine keeps jamming and coming out of the eye of the needle, the bobbin thread is working perfectly. It works great for about two seconds and then makes a load sound and the top thread comes out. I have no idea what’s wrong with it and it’s brand new.
literally mine !!!
you might have not maybe put it threw the little hole where the needle comes from when you lift it this used to happen to me too
@@whooiszazatry putting it threw the hole where the needle comes from when you left it
you're very helpful...easy to follow your steps. thankssss
Thank you sooooo much I am so happy I found this video I practiced as I watched took a few times not perfect but it’s better than before cant wait to be a pro
Thank you so much, it’s so useful for me now!
Great video!
Thank you, I was having trouble threading my machine, your instructions are so clear it’s working now!!
I’m lost at the putting the thread through the bobbin thread I don’t get any more thread from the bottom or is the needle thread gonna loop on it self
You should definitely get closer with the camera and better angles
Yes !! Good video could’ve been great but you’ll miss steps cause you can’t see what she’s doing a waste of time for real
Got lost at 12:20 , what hole do you put the needle thread through at the end ?
Me too, I do not understand what she’s saying there
Thank you❤.
I got everything up to "the hole of the bobbin thread that come up" I am not seeing a hole to put the thread. My needle thread is attached to the bobbin thread but there is no hold to thread the needle thread through to pull both of them to the back my bobbin thread is still coming out the from of the bobbin cover. Is this correct?
Your camera man needs to zoom in more
This was super helpful but I did have some trouble with putting the thread through the eye of the needle! Otherwise I just need to get over my fear of the fast stitching 😂😂
Can this machine make a buttonhole or can you attach a buttonhole maker?
It can make a buttonhole
Do you think it would be a good beginner friendly machine ?
Yes, this machine is perfect for beginners. It is very easy to use, and has a simplistic design which makes it user friendly.
Putting the thread in needle and what to do next is hard for me??????????
Machine is new I only had it 3 weeks I was using it and it lifting came off the thing that looks like a a fork thing that comes down on the clothes the whole piece came off I want to know how to put it back on well who should I call what should I do it's brand-new that's crazy
Well I just got this for my birthday April 5th and this is the first time I'm trying to use it and the piece that holds the material that looks like a fork it came off this is crazy I don't know what to do or how to get it back on I want to talk to somebody I want my money back oh I did tear the damn tape
I was trying to say I do have a guarantee I'm going to call target i bet i have to go through a lot of changes
Wow
You should only turn the manual feed wheel towards you. Not away like you did in the video.
Don't even know what that little pieces called the piece that comes down and holds the clothes that looks like a Fork it came out I was sliding the material under there and I pulled the lever down for the thing to hold material and it came off what should I do
I'm having a hard time threading the bobbin it's hard to see on the video the last step before sewing
Is there a way to adjust the speed? It’s so fast
I watched a review/demonstration video before this one and her only complaint was that it has only one speed.
I am having a lot of trouble replacing the needle.Is there an easy way to do this ?
Jajajaja the intro is so funny jajajajaja
When i try too pull the loop it dont work
There’s a great video on another channel about how to correct when the bobbin thread won’t catch. Seems like it’s a common problem for this machine, but it’s an easy fix.
my foot pedal does not work. The machine is getting electricity but I press foot pedal and nothing happens. 😢
Is it just mines or ? My machine is missing the bar that’s by her needle when doing the last few steps.. this is my first time using a machine, send help please 🥺
I think it’s called “a removable finger guard” (another video said it) do I need it? I followed all the steps until the end and now I’m stuck trying to finish threading
Mine did not come with one of those either. So far I haven't missed it so it's probably good. @@exclusiveroyalty9169
Question:
I replaced the bobbin because I ran out of thread, and my problem now is I cannot pull out the thread from the bobbin. What seems to be the problem?
This has happened to me before. You may have a knot. Try unraveling the thread until you find the area that is tangled. You may need to cut the thread to allow it to move freely.
The thread keeps getting cut do you know what can be happening?
How about tension know? My top thread keeps breaking:(
the video is great but the part after u put the thread they the needle is a little foggy… this is where i can not follow from. if u can pls help in a clearer way i would beyond be so grateful!!
I don't understand what you do after 12:27. what do you do with the loop of bobbin thread
what do you do if the bobbin thread won’t come up and the bobbin will turn but not when you are trying to thread it
If you are having trouble threading your bobbin, you may need to start over. This can be a little tricky if you are first trying it out. In the beginning of this video is the step by step guide on how it is done. ❤️
I tried everything every video and I started over and over again but my bobbin thread still won't come up
@@mystery0cean129 me too 😭
i can not find the loooooop…. pls help
Check out my latest video. It will guide you with the loop. 😉
thank u sooooo much for responding !! what is the date of the newest video !? i can’t seem to locate it !!:(
Using the same color thread as machine bobbin is not helpful you can't differtiate thread from bobbin...after watching carefully a few times bobbin and needle aren't synced
This video shows nothing in specific about pulling the loop through the needle. Why only speak about it, yet show nothing?? 🤷🏼♂️
Thank you you save me from wasting time
@@tattedtotif you don’t like it don’t watch until the end and don’t leave bad comments, if it wasn’t useful for you it was for me ! Peace ✌🏻
@@Miih94womp womp
Worst video