Welcome to skateing my dude! As someone whos been doing this most my life here is my best advice for you starting up... shin protectors! Dont worry about a helmet or knee pads, its you shins that are gonna get beaten to hell learning pop shuvs/varial kickflips ect, anything that swings the board around right at your shins. Every time you dont get the timing your gonna get shin smacked so hard. My shins are a wall of scars, most skaters are. So yeah thin plastic shin protectors when your learning those down.
This is super impressive. You could probably create a whole business on doing this for people. I would love to have some of my old boards be turned into fingerboards!
Hey you know how the new G16 has low concave and high kicks? Make a board that has almost no kicks and TONS of concave. Make 2 and send one to Mike himself
Salut, je suis français, j’adore tes vidéos, une dinguerie. Moi aussi je fais du finger skate mais en France y’a pas beaucoup de youtubeurs finger Board
you should diffidently do one of the zero skull graphics and a baker or Deathwish graphics also what is the name and type of tool you use for the countersinks because i just use a screwdriver and twist it twenty five times in each hole it works really well but takes a long time make my hand and wrist really sore. love the video
nice vid! how do you get the 5 ply wood you use for the mold? is it 5 ply? where do you get the mold and shaping mold too! you should make a video on making custom fingerboards and molding stuff
Idk why, but i wanna see a setup thats like this, but even more like the board, like same shape, same.grip, etc Basically making a fingerboard look exactly like a skateboard, just shrink down
@@ovoech3762 I basically wanna see someone make a fingerboard that has basically the same setup as a really skateboard, like sandpaper grip, same style wheels and trucks, etc
I'm a total beginner and just learned to do an ollie so correct me if I'm wrong. But isn't a Tech Deck made from plastic? So technically it's not a Tech Deck you made.... it's way better. Currently waiting for my package to upgrade my 32mm Nyjah Huston Tech Deck. I also have a hand full of 29mm Tech Decks but I don't like them.... not wide enough. But the 32mm Nyjah Huston Tech Deck is pretty nice. I like the 32mm, the graphics, the trucks, but that's it. That's why I ordered bearing wheels, 0,5mm foam griptape and actual bushings. Because this 32mm does come with rubber bushings but they are poor quality.
I hope you see my comment!! i make fingerboards under the name of BoneFish, and i was wandering if i could send you a board and you could rate it? i was on your discord a couple years ago too.
![The Best Possible Fingerboard?! FlatFace G16 Deck [4K]](/img/n.gif)
Now we need a small version finger bike of your bike
Welcome to skateing my dude! As someone whos been doing this most my life here is my best advice for you starting up... shin protectors! Dont worry about a helmet or knee pads, its you shins that are gonna get beaten to hell learning pop shuvs/varial kickflips ect, anything that swings the board around right at your shins. Every time you dont get the timing your gonna get shin smacked so hard. My shins are a wall of scars, most skaters are. So yeah thin plastic shin protectors when your learning those down.
ha nerd , just accept the pain like a real sigma male
@@DorianClark-k6mthis is a joke right
@@Isuckkk yes
@@DorianClark-k6m good
"You're Brain is you, everything else is an extension of you" -Andy Anderson... wear a helmet!
This is super impressive. You could probably create a whole business on doing this for people. I would love to have some of my old boards be turned into fingerboards!
Sick setup, Alex!
Always love to see your notifications on tt love the vid man keep it up
Hey you know how the new G16 has low concave and high kicks? Make a board that has almost no kicks and TONS of concave. Make 2 and send one to Mike himself
It needs to happen
@@gaigeperez833 I agree
What are you 5 years old?
@@Mxnuel_2395 how💀
@@Mxnuel_2395 oh ye it’s my brothers account he cringe
Dude, that's such a cool idea, keep up the banger videos🔥🔥🔥
love ur videos man
I love your videos man!! Mad Respect 🙏
Putting Mod podge on after the paper work Really well 👌
Matte works well 7:52
I’ve been here since the start of this young man’s epic journey, best video so far!
Use Tacky Glue i work great fro glueing wood and paper together. 😄
That’s so clean
thats actually sick
BEST VID YET! keep up the content!
I would recommend clear coat on the deck it makes the graphic last longer
7:53
I LOVE U MAN KEEP UP THE GOOD WORK 👍
i recently got into fingerboarding i find it fascinating love the content!
Where can I buy the mould u use?
Here since 10k🎉
Put the sharks wheels on the bored
I have a little idea! if you can buy skateboard wheels used or new and try to make fingerboard wheels from it!
I have just ordered a set of ill pill wheels and you made me want to get them
We need a video of alex learning to skate pleaseee
I was wondering if you could post some straight up clips in shorts of something
Should have used illpills they would be literally identical
your intro is nostalgic〽️
Now make full size fingers on you pants to “fingerboard”
I have a video idea: try to build an ultra realistic fingerboard park
Salut, je suis français, j’adore tes vidéos, une dinguerie. Moi aussi je fais du finger skate mais en France y’a pas beaucoup de youtubeurs finger Board
you should diffidently do one of the zero skull graphics and a baker or Deathwish graphics also what is the name and type of tool you use for the countersinks because i just use a screwdriver and twist it twenty five times in each hole it works really well but takes a long time make my hand and wrist really sore.
love the video
liking the video only made me 10% more consistent at kickflips but 10% is 10%
This is sick and you should do try make your bulldog bord into a big bord
Do you not lacquer the board so that it’ll hold the graphic longer? Nice video 🙌🏻
looks nice!
How do you print graphics? Please make a video on it
We need more unboxings from smaller companies..
We’re did you get that white board from that has the black as a out line as a mountin
nice vid! how do you get the 5 ply wood you use for the mold? is it 5 ply? where do you get the mold and shaping mold too! you should make a video on making custom fingerboards and molding stuff
Idk why, but i wanna see a setup thats like this, but even more like the board, like same shape, same.grip, etc
Basically making a fingerboard look exactly like a skateboard, just shrink down
? that’s literally what he did
@@ovoech3762 I basically wanna see someone make a fingerboard that has basically the same setup as a really skateboard, like sandpaper grip, same style wheels and trucks, etc
Luv your vids
I love this!
it would be really good if you did a video of how you fingerboard and then do the same trick on a skateboard
Cool video also can you put the link to the mold in the comments
What paper do you recommend for deck graphics?
Your all video is so cool trick😮
I'm a total beginner and just learned to do an ollie so correct me if I'm wrong.
But isn't a Tech Deck made from plastic?
So technically it's not a Tech Deck you made.... it's way better.
Currently waiting for my package to upgrade my 32mm Nyjah Huston Tech Deck.
I also have a hand full of 29mm Tech Decks but I don't like them.... not wide enough.
But the 32mm Nyjah Huston Tech Deck is pretty nice.
I like the 32mm, the graphics, the trucks, but that's it.
That's why I ordered bearing wheels, 0,5mm foam griptape and actual bushings.
Because this 32mm does come with rubber bushings but they are poor quality.
Where... where did the clear coat step go
WHAT TYPE OF PAPER FOR THE GYAT DAYM GOOD AF GRAPHIC
I'm still using a teck deck over 3 years
I believe Black River makes a 7 play deck now
You should make an eraser fingerboard
crazy
Where to get a tech deck
Where can I buy that mold?
Create Your Skate
I wanna get a g16 mold
Can I have foam griptape for a fingerboard
I have never seen a better board😮😮😊❤❤❤
Hey! Can you make a fingerboard out of foam grip tape 🛹 I hope you can make it🙂
Make bart simpsons' skateboard into a fingerboard
What skateboard is this
Hi gripson you are my fav fingerboarder I hope to be like you one day. Can you tell me how to join your discord server?
Clear coat.?
When you do that get parchment paper
Nice that is soo cool
Do a video of you skating
No he doesn’t but he has video of trampoline skating
Make Bart Simpsons skateboard as a fingerboard
Amazing idea: "cut venir with scissors"
Nice
very NOICE 🎉🎉
It’s 123 now it’s 124 hehehehhe
Why would he lie my kickflips aren't 30% more consistent there 60%
W
No clear coat😅
If I like 2 time am I 60% better at kickflips 😱
day 1 of asking free fingerboard from you
Alex can I buy
hey gripson you need to get your discord mods together cuz they bandded me for 3 yrs bc im 10
I hope you see my comment!! i make fingerboards under the name of BoneFish, and i was wandering if i could send you a board and you could rate it? i was on your discord a couple years ago too.
Day ✨30✨ of asking to get blackriver trucks
Copy the skateboard of Bart Simpson s into a fingerboard
Skate vid
My name is mason
👇Here within an hour!!
цвет не очень похож он потемнее скейта
Hi
wow
30 min gang
👇
🗿
Yurrrr
I am the first comment! The fingerboard looks insane!
11 Views lol
59 for me
oooooooooooooooooooooooooooooo
Can I get one for free please I only have a thck Deck and everyone has one and I don't please 🥺
Hellllloooo
100th comment
Can you please send me a finger board 🥺
WWWWWW
First
plz send me a finger board plzzzzzzz