Ambrogio Robot - ZR Base Station Installation

Поділитися
Вставка
  • Опубліковано 23 сер 2024
  • How to set up a base station for the Ambrogio ZR Robot Mower. Installation show standard and offset situations, with off-lawn base station.

КОМЕНТАРІ • 5

  • @sampon597
    @sampon597 Рік тому

    Hello John, I like the Ambrogio mower, do they available for folks in the U.S.A?

  • @Gragon
    @Gragon Рік тому

    Whats the total length of the guide wire here? THe manual says it cant be less than 50m but this surely isnt 50m.

    • @kristianhansen6114
      @kristianhansen6114 Рік тому

      It depends if you just want to catch the robot and guide it to the base (short cable) - or use the cable to sende off the robot to different zones in the garden (long cable). If you use zones you can program the robot to move a certain length out following the cable before it starts to cut the grass and run its cycle 😉

    • @Gragon
      @Gragon Рік тому

      @@kristianhansen6114 thanks for the reply. Could you explain to me how the clockwise/anticlockwise thing works?
      If I pick anticlockwise, does that mean the robot will back out of the charging station and then go forward by the wire that goes into the black terminal?

    • @kristianhansen6114
      @kristianhansen6114 Рік тому

      @@Gragon I haven't (yet) got one myself. But that's how I've understood it also 👍