Because I’m too cheap to buy a golf club gripping station, I decided to made one of my own. 40 ish bucks of material and a few man hours later, this is the result.
Outstanding job Sir. I'm a hobby club builder with a background in woodworking, which is right up my wheelhouse. Your idea far exceeds what mine ever would!!!
Awesome video but it’s hilarious you said the $270 dollar tool was out of your price range as you use a couple thousand dollars worth of other tools to build your station 😂
A dog point set screw into he vice jaw in the area behind the ball shape on the end of the screw will fix the screw from coming out when opening the jaws. Just deep enough to capture the jaw to the screw but still let the screw spin... Or small cylindrical piece of delrin and a regular screw behind it will do the trick too...
Matt, great job! Two questions, first does the big "N" on the box near your work table stand for Naperville North, and two, I saw the Cubs cozy, so I can guess your a Cubs fan living near Chicago? Your next project should be using a bottle jack for making a head puller for graphite shafts. Again, well done.
You should reverse the tape roll so that it feeds from under then over the top cylinder roller which sits in front of the cutting teeth. It will then be easier to tear the tape off evenly with downward pressure because the tape feed angle will be better. Greetings from Down Under.
Thanks, I got it from Amazon. The link isn’t working at the moment but I show the box it came in in the video so if you search for that brand you should be good.
If you remove your vice you should see a grub screw underneath that will tighten up and stop the the screw from popping out of the vice jaw. 10min fix.
Outstanding job Sir. I'm a hobby club builder with a background in woodworking, which is right up my wheelhouse. Your idea far exceeds what mine ever would!!!
Awesome video but it’s hilarious you said the $270 dollar tool was out of your price range as you use a couple thousand dollars worth of other tools to build your station 😂
Dude 🤯 This is the video I never knew I always needed. I’ll let you know how mine comes out, when I do one. Thank you for this!
A dog point set screw into he vice jaw in the area behind the ball shape on the end of the screw will fix the screw from coming out when opening the jaws. Just deep enough to capture the jaw to the screw but still let the screw spin... Or small cylindrical piece of delrin and a regular screw behind it will do the trick too...
Matt, great job! Two questions, first does the big "N" on the box near your work table stand for Naperville North, and two, I saw the Cubs cozy, so I can guess your a Cubs fan living near Chicago?
Your next project should be using a bottle jack for making a head puller for graphite shafts. Again, well done.
It stands for Nagy. My family actually painted that for me. Also although I am a Cubs fan, I am not near Chicago.
You should reverse the tape roll so that it feeds from under then over the top cylinder roller which sits in front of the cutting teeth. It will then be easier to tear the tape off evenly with downward pressure because the tape feed angle will be better. Greetings from Down Under.
That’s actually a pretty good idea. Thanks for the tip!
Very cool. If I can figure out where to store it when I'm not using it, I may have to make this. Where did you get the vise?
Thanks, I got it from Amazon. The link isn’t working at the moment but I show the box it came in in the video so if you search for that brand you should be good.
If you remove your vice you should see a grub screw underneath that will tighten up and stop the the screw from popping out of the vice jaw. 10min fix.