My new SJRC F11 crashed right after my first flight. I had the drone set up to hover about 10' and video record me coming towards it on my E-board. I was about 100' out and after I approached and went back out again , I heard a noise and looked back and the wind must have pushed it into a tree behind it and it fell and tumbled. The tilt axis is now stuck and won't move. I hope your experience in repair will help me get to my problem and solve it. My DJI Spark is very stable at hover, the SJRC seemed very erratic and susceptible to wind, although it was very light.
Although your comment is quite old, i want to say that i have the same impresion. This is my first drone and It is not that easy to fly if you try to do It at low heigh in a place with some obstacles (trees, etc.) as i find it unprecise, and is unable to maintain position and heigh with a very light wind. I crashed it several times. The last time I broke one of the arms and I need to replace it...
I have the SJRC F11 pro...I wanted to upgrade the from the old fish eye camera to the New 2 axis gimbal camera, is it possible and if so what parts would I Need?? Or would it just be cheaper to buy a whole new better drone? 🤔
i am a paieint man and love to work on things like this ....however I might have gone off the deep end .....great job guy....I've got to replsces top enp on my yz in a.m. so I can get to work om-n my dli fpv
My sjrc f114k pro drone was crushd... Now ever of the prt is ok. The drone is openning but its wifiy is not openning and with controler it not connecting... What will i do now bro...?
It would have made more sense to have individual ESC's incorporated into each leg instead of the all in one ESC distribution board and redesign a slimmer more aesthetically pleasing fuselage, which, let's be honest, is an ugly bugger. This model does not have optical flow although the moulding has provision installation - maybe a later model revision. A tear down of the controller is more beneficial so as explore the possibility of increasing antennae effiency and range extension.
Hello. It's good that I found you;) I would be very grateful if you would help me. I have a KF101 max drone with a factory defect, I can not find satellites, sometimes a signal appears, but most often on the display of 0 satellites, I am looking for a GPS module, from what I can see, the structure of this drone is similar to kf101, the gps module and the gyroscope are similar or identical. I did not start my drone to the same extent as you did, I did not remove the gps module, there is also this black sticker on it, but I can see that it will probably be the same as in SJRC. My question, do you know the module supply voltage? in kf101 on the motherboard there is 5V GPS description, 3.3V gyroscope, is it similar in SJRC? can you read from the module its type, some number? I would be grateful :) Thanks to your video I caught a clue to finding a damaged gps module and a gyroscope, best regards
Mind just stop beeping when i turn the drone on just like the esc dont calibrate whit the motor evryting els works but the motor dont ingage i dont have a clue whats wrong.
hiy are u have no WhatsApp , my drone have a problem model SJRC F11 4K pro , lepas tukar arm terus xboleh fly naik serching for GPS lama tunggu xnaik Ready To Fly
So, I can completely make a big helicopter that fits me and my parents inside. Just change the motor and use that small part of chipboard and sjrc controller to fly the helicopter across the world. I feel accidentally genius.
I hired an electrician and we followed your tut. We replace all circuit boards and the drone was up and running. thanks for sharing
Great Video, I got one of those drones and it is the Perfect project for this 70-year-old!
My new SJRC F11 crashed right after my first flight. I had the drone set up to hover about 10' and video record me coming towards it on my E-board. I was about 100' out and after I approached and went back out again , I heard a noise and looked back and the wind must have pushed it into a tree behind it and it fell and tumbled. The tilt axis is now stuck and won't move. I hope your experience in repair will help me get to my problem and solve it. My DJI Spark is very stable at hover, the SJRC seemed very erratic and susceptible to wind, although it was very light.
Although your comment is quite old, i want to say that i have the same impresion.
This is my first drone and It is not that easy to fly if you try to do It at low heigh in a place with some obstacles (trees, etc.) as i find it unprecise, and is unable to maintain position and heigh with a very light wind. I crashed it several times.
The last time I broke one of the arms and I need to replace it...
I really enjoyed this video... greetings and support again my friend👍
Hi,
I crushed my F11S 4K Pro and now the props touches the body when they spin, please help how can i fix that
can GPS be improved? maybe changing it with a better one?
Tx for The video
Ok. Next step: rebuild and test for properly functionality.
I have the SJRC F11 pro...I wanted to upgrade the from the old fish eye camera to the New 2 axis gimbal camera, is it possible and if so what parts would I Need?? Or would it just be cheaper to buy a whole new better drone? 🤔
i am a paieint man and love to work on things like this ....however I might have gone off the deep end .....great job guy....I've got to replsces top enp on my yz in a.m. so I can get to work om-n my dli fpv
My sjrc f114k pro drone was crushd...
Now ever of the prt is ok. The drone is openning but its wifiy is not openning and with controler it not connecting...
What will i do now bro...?
It would have made more sense to have individual ESC's incorporated into each leg instead of the all in one ESC distribution board and redesign a slimmer more aesthetically pleasing fuselage, which, let's be honest, is an ugly bugger. This model does not have optical flow although the moulding has provision installation - maybe a later model revision. A tear down of the controller is more beneficial so as explore the possibility of increasing antennae effiency and range extension.
How much did all the electrical parts and arms weight
Thank you alot for your effort and risk assumed.
Have you ever had a "vertical inclination too high" warning after it summersaults towards the ground? What would cause this?
Esse aí nunca mais é o mesmo! é o famoso já era!
Hello. It's good that I found you;) I would be very grateful if you would help me. I have a KF101 max drone with a factory defect, I can not find satellites, sometimes a signal appears, but most often on the display of 0 satellites, I am looking for a GPS module, from what I can see, the structure of this drone is similar to kf101, the gps module and the gyroscope are similar or identical. I did not start my drone to the same extent as you did, I did not remove the gps module, there is also this black sticker on it, but I can see that it will probably be the same as in SJRC. My question, do you know the module supply voltage? in kf101 on the motherboard there is 5V GPS description, 3.3V gyroscope, is it similar in SJRC? can you read from the module its type, some number? I would be grateful :) Thanks to your video I caught a clue to finding a damaged gps module and a gyroscope, best regards
heyhey, need help installing a new power board and flight controller to my f-11 pro please help
Thank you, your video was very helpful !!
Mind just stop beeping when i turn the drone on just like the esc dont calibrate whit the motor evryting els works but the motor dont ingage i dont have a clue whats wrong.
Thanks for the tutorial. Hope I never have to use it. :)
El mejor video que he visto pero podría haber incluido fotografías de las placas vistas de cerca.
hiy are u have no WhatsApp , my drone have a problem model SJRC F11 4K pro , lepas tukar arm terus xboleh fly naik serching for GPS lama tunggu xnaik Ready To Fly
Next video? Link please..
ua-cam.com/video/hkstlnQ87fw/v-deo.html
@@alanpapaya2957 tq bro
O cara e fera 👍
O maluco é bichão mesmo
after that what happen with your drone, can you fix it again..
You can watch my next video, how do I restore back
КРАСАВЧИК 👍
Tienes cursos ?
Pufff, mejor qué no se rompa nada.
teardown Drone KF101 max + Remote
I would be grateful of you give that to me❤
Nice
👍👍👍👍
Can't I just use a hammer?
😂
I can't Imagine if that is a human body🤣🤣🤣
di atas kamera baut paling susah
Next: upgrade camera
Me hubiera gustado que lo hubiera armado también...
😬
Kalau cuma dapet 800 meteran ngapain cape cape di rubah orang saya punya sjrc f11 ori pabrikan 1kilo nyampe...
So, I can completely make a big helicopter that fits me and my parents inside. Just change the motor and use that small part of chipboard and sjrc controller to fly the helicopter across the world. I feel accidentally genius.
This is killing me please stop ⛔