@@earlmoorhead5555 I finally figured out how to do this E…. I’m a little slow when it comes to computers…..you’re so very welcome…. Glad to help out “Yoda”…. lol
Thanks!, I just ordered mine and am looking to upgrade esc and bec. Thank you for your videos. I really enjoy seeing them. Thank you for the how to videos as well.
I think brake cable is gettin hung up when the forks compress mate.should look at the rider figure from the xrider bike if u want something lighter and a bit more tucked to the bars.
Yes I ordered at the same time I ordered the rc car and all my optional parts I didn’t even use the discount card yet and I don’t have half the parts I ordered yet 🤷🏻♂️front tire came month ahead of the rear tire
Gonna need that extra power. That thing is doing great though man I know you’ll be able to get that 100mph with a little more time and energy and a few parts 👍
And yzzr the spectrum 100amp and the 120amp esc's r the same size. I'm super excited to see what that bike can do on 4s. But what battery r u going to put in it??
Your bottleneck on this setup is your battery. You need an Onyx 150c or a Max-Amps 180c. The regular name-brand batteries don't have enough amps to increase the gear ratio. Spending 200 dollars on a speed-run battery is pretty normal if you want to really push it. My Thunder Tiger Ducati will do 92 mph on 3s but it has a full faring on it to cut wind resistance. It also has room for a 3s 9600 mah 150c Onyx battery. The best way is just to keep going at it. You will eventually figure out the secret recipe on your own. You will have it to 100mph in no time. Good luck will be keeping tabs on your project.
ThTs crazy since my vendetta went 114mph on the same battery I’m using 😱 I feel someone should tell the battery it shouldn’t go 100mph 🤷🏻♂️lmao seriously it’s only a 100mph not setting records on this basic set up and that why I show the normal Rc guy you don’t need tons of money to do 100mph basic stuff we remove can do it to 💯
Why not just try a higher kv motor? The higher the kv the more rpm it will turn.also,what c rating battery are you using?i use at least 100c,just seems like the esc is much more efficient the higher the c rating.i haven't tried any of this with my promoto,however i have done the exact same thing with my 10th scale 4wd basher.using a 4000kv motor,a 100 amp esc,and 120c rated 3s and im reaching 100mph.although,my tires would come apart if i gear up any more.
@@earlmoorhead5555 probably not but actually an interesting test would be just to swap all bearings to ceramic and see how much difference it does make with current setup since you don't believe motor is reaching full rpm .. curious can you get telemetry that tell you the max rpm you are getting at full speed? Then you can compare to unloaded rpm motor would do in theory based on kv and voltage and also compare to motor rpm at full throttle with wheels off the ground ..
@roblapouple7552 flowpack did that test on his slash made no difference with bearing working properly and found that ceramics melted at high speeds so he recommended metal ball bearings with flow juice just thin oil in the bearings
@@earlmoorhead5555 another easy test with your same setup try running down a steep hill to see if it goes much faster ... maybe something like chain can have a rpm where it just has lot more resistance or something
@@Bogues_88 if I was closer to 100 mph I would I’m just to far away from the goal as the rc is dialed in and responding well with changes just peaked right now I know I can get a few more mph but that won’t get to my goal
@@earlmoorhead5555 Dante I think his name was , you would visit his lives , he bought raminator went to rc festival that was it , I went through my old rc and UA-cam subscription list , a lot guys just stop rc get into something else , than re visit when they get older
Oh 4s going boogie , should get you to 100 , or close , you know always seems extra power doesn’t go as far after a certain point , you may only get another 10 15 mph , I know you know that, you’ll be using a little 6s castle and drone battery by time you done haha
@earlmoorhead5555 Yes, but it you would like a free castle copperhead esc hit me up. I'm local, Torrance,Ca. Need help on programming a new transmitter.
What about a rear sprocket? This dude is going to end up with a 6s backpack before its over with lol jack o trades 3d printed a sprocket interestingly enough he went smaller on the rear.
Tire and gear both made no difference gearing up even with a sprocket will just slow down motor rpm & Kv is peaked so gearing won’t help it will just get slower
@@earlmoorhead5555 You're obviously gifted in mechanics, but remember most of your audience has a Promoto MX. I can only hear the buzzing when i have it close to me to power it down and can't hear it all while running it. I had to turn my volume down while viewing this it was so loud, it sounded like a bomb about to explode lol.
@spenn2007 gyro been checked no issues found and I’m spinning my gyro faster then everyone else as the voltage is turned up to a steady 8v so yes mine makes noise 💯
@@earlmoorhead5555 Oh wow, damn bro, you're really pushing it. I dont see the speed of this RC as a flaw, but i wouldn't mind it being around 50 to 60 range lol. Im going to continue attending Earl's RC speed class before i decide to at least install the 3S setup.
@Rckid28 any motor will spin till the epoxy gets to hot and the Kevlar shreds so keeping it cool between pulls it should last from what I’ve found that’s why my vendetta 3s motor never blew up on 6s 👍💯
@@Rckid28 max rpm rating are for power applied so 2S has one rating 3S has another rating and so on and if you use the motor consistently over spinning them it will heat up melt down or come apart
Earl we ( all of us ,-everyone) really appreciate your videos so PLEASE PLEASE don’t take this Suggestion the wrong way one UA-camr runs at closed down on weekends freight yards where you can see several empty loading docks where 18 wheelers usually back end - there is plenty of room for him to do his speed runs- it may be best to seek a place like that out- right now someone may hit you or you them- he calls his Super Speed Sundays or Saturdays that let’s us know those locations are closed on the weekends
@@kenknox6424 alway will be carful been speed running a long time with no one getting hurt and no damages to anyone property but my own believe it or not I truly make it safe even tho the videos doesn’t always show it that why make it more controversial for ppl to watch 🙏👍everyone has a right to suggest and leave a respectful comment on this channel 👍
For all the things I've learned from you on your channel.... You are the original RC "Yoda"...ThankYou E.....
Appreciate the major support 🙏appreciate it thank you
@@earlmoorhead5555 I finally figured out how to do this E…. I’m a little slow when it comes to computers…..you’re so very welcome…. Glad to help out “Yoda”…. lol
smaller rear bigger front with real motorcycles, not sure what i'm trying to say haha, upvoted!
Thanks!, I just ordered mine and am looking to upgrade esc and bec. Thank you for your videos. I really enjoy seeing them. Thank you for the how to videos as well.
Appreciate your support on the video means a lot to me 🙏
Sorry I've been down . Great video , Thanks for keeping going , your videos help not only with rc but dealing with life for sum of us .
Thanks
I think it would be cool if they made a street version for speed running.
Earl Moorhead your video is all way good keep up cool job tank you speedrun video 💯
I wonder Earl if you could do a night run looks like a lot of streetlights. just wondering and the New esc that’ll do it
Ya looks like that set up is maxed out. Gonna be fun stuffing a 4s pack in that bike lol. Looking forward to more !
Appreciate your support 🙏🔥
Imagine an on road bike with full fairing.
might gain with a superbike fairing style
Be fun 🤩
@@earlmoorhead55558s outcast exb rtr only slightly turning. Have to reverse on a 2 car lane just to bring car back from a sent!! Please help.
I think brake cable is gettin hung up when the forks compress mate.should look at the rider figure from the xrider bike if u want something lighter and a bit more tucked to the bars.
Thanks! On to the 4s ESC 👍👊🔥💯
Your continued support means a lot thanks 🙏
Thanks!
Thanks for supporting the videos 🙏🔥
Wish my road tires would get here already.
Yes I ordered at the same time I ordered the rc car and all my optional parts I didn’t even use the discount card yet and I don’t have half the parts I ordered yet 🤷🏻♂️front tire came month ahead of the rear tire
Excellent work again!!
Appreciate your support 🙏🔥
Are you gluing the exhaust tip . I glued mine it with gorilla glue with the blue lid .
Yes I glued it with tire glue
Gonna need that extra power. That thing is doing great though man I know you’ll be able to get that 100mph with a little more time and energy and a few parts 👍
Question .. you mentioned what pitch of gears the Losi mx bike is using... thanks
Yes I did give the pitch 32 Losi shows the pitch as well
cool runs,time for some nitrous .....lol
Will the losi no prep 6900kv motor fit .... how about that for a modification ???.
Yes but the amps will then hit LVC Trying to Push higher kv with limited reserves and the heat it will produce to push the rc will be extremely high
The higher kv produces more heat and requires more amps to drive to make it efficient along with the weight it can push will overheat with this big rc
And yzzr the spectrum 100amp and the 120amp esc's r the same size. I'm super excited to see what that bike can do on 4s. But what battery r u going to put in it??
Soft pack lectron pro
Your bottleneck on this setup is your battery. You need an Onyx 150c or a Max-Amps 180c. The regular name-brand batteries don't have enough amps to increase the gear ratio. Spending 200 dollars on a speed-run battery is pretty normal if you want to really push it. My Thunder Tiger Ducati will do 92 mph on 3s but it has a full faring on it to cut wind resistance. It also has room for a 3s 9600 mah 150c Onyx battery. The best way is just to keep going at it. You will eventually figure out the secret recipe on your own. You will have it to 100mph in no time. Good luck will be keeping tabs on your project.
ThTs crazy since my vendetta went 114mph on the same battery I’m using 😱 I feel someone should tell the battery it shouldn’t go 100mph 🤷🏻♂️lmao seriously it’s only a 100mph not setting records on this basic set up and that why I show the normal Rc guy you don’t need tons of money to do 100mph basic stuff we remove can do it to 💯
Aw man I thought for sure you'd got 70 mph on this run.......well looks like a 4s esc is coming. 😊
Yes the street tire in every test was 2mph slower beca of size stock tire alway went faster but turn way less
Do plan to get the Arrma 8s EXB or the Outcast in the near future??..
I own one already
Haha "this road" feels like back in the day.
Why not just try a higher kv motor? The higher the kv the more rpm it will turn.also,what c rating battery are you using?i use at least 100c,just seems like the esc is much more efficient the higher the c rating.i haven't tried any of this with my promoto,however i have done the exact same thing with my 10th scale 4wd basher.using a 4000kv motor,a 100 amp esc,and 120c rated 3s and im reaching 100mph.although,my tires would come apart if i gear up any more.
Stl_rc is doing that he’s at 70 mph on his castle system
Can you change the rear sprocket on this as I guess it's really a spur gear ?
Yes hot racing now makes them and a chain to go with it
Are you able to get sprockets for the reat tire yet
I’m having one built no one makes anything yet
🍻
Tine put ceramic bearings in and a 7700 kv motor
From 70 mph to 100mph is 30 mph I can’t see bearing and my set up driving a 7700kv motor 👀
@@earlmoorhead5555 probably not but actually an interesting test would be just to swap all bearings to ceramic and see how much difference it does make with current setup since you don't believe motor is reaching full rpm .. curious can you get telemetry that tell you the max rpm you are getting at full speed? Then you can compare to unloaded rpm motor would do in theory based on kv and voltage and also compare to motor rpm at full throttle with wheels off the ground ..
@roblapouple7552 flowpack did that test on his slash made no difference with bearing working properly and found that ceramics melted at high speeds so he recommended metal ball bearings with flow juice just thin oil in the bearings
@@earlmoorhead5555 another easy test with your same setup try running down a steep hill to see if it goes much faster ... maybe something like chain can have a rpm where it just has lot more resistance or something
@@Bogues_88 if I was closer to 100 mph I would I’m just to far away from the goal as the rc is dialed in and responding well with changes just peaked right now I know I can get a few more mph but that won’t get to my goal
This dude is playing chicken while doing speed runs! Life Goals! 😂
😎💯💯💯
Actually smaller earl , same size as the 2s guy you took out , what happen
To kid from Minnesota
Yes the 2s I took out is the same size as the 100amp I put in it 🤷🏻♂️
Not sure what kid your talking about 🤷🏻♂️
@@earlmoorhead5555 Dante I think his name was , you would visit his lives , he bought raminator went to rc festival that was it , I went through my old rc and UA-cam subscription list , a lot guys just stop rc get into something else , than re visit when they get older
@@RcPlayer-tt2vw yes he not doing rc anymore life got in the way he’s back to work and stopped rc for now
Oh 4s going boogie , should get you to 100 , or close , you know always seems extra power doesn’t go as far after a certain point , you may only get another 10 15 mph , I know you know that, you’ll be using a little 6s castle and drone battery by time you done haha
What tooth pinion comes stock on the promoto?
Castle copperhead is small in size and 4s capable.
Yes but spectrum is free take off units
@earlmoorhead5555 Yes, but it you would like a free castle copperhead esc hit me up. I'm local, Torrance,Ca. Need help on programming a new transmitter.
@Pete100 I’ll help you anyway email me a phone number at Moorhead.earl3@gmail.com and I’ll help you out 👌
I’m sure with a little bit of searching you can find a place like that or some shut down businesses that are now empty
This is my 15 th location on my years of speed runs so far the safest location
What about a rear sprocket? This dude is going to end up with a 6s backpack before its over with lol jack o trades 3d printed a sprocket interestingly enough he went smaller on the rear.
Tire and gear both made no difference gearing up even with a sprocket will just slow down motor rpm & Kv is peaked so gearing won’t help it will just get slower
How about the max 10 esc it's a 140amp??
I showed its to big
Super loud, something gotta give bro.
Idk I’ve done many runs and it’s been flawless so far 👍👌
@@earlmoorhead5555
You're obviously gifted in mechanics, but remember most of your audience has a Promoto MX. I can only hear the buzzing when i have it close to me to power it down and can't hear it all while running it. I had to turn my volume down while viewing this it was so loud, it sounded like a bomb about to explode lol.
@spenn2007 gyro been checked no issues found and I’m spinning my gyro faster then everyone else as the voltage is turned up to a steady 8v so yes mine makes noise 💯
@@earlmoorhead5555
Oh wow, damn bro, you're really pushing it. I dont see the speed of this RC as a flaw, but i wouldn't mind it being around 50 to 60 range lol. Im going to continue attending Earl's RC speed class before i decide to at least install the 3S setup.
Boom 🎉
Motor can only take 3s no??
No motor don’t care heat will kill it tho
@@earlmoorhead5555 i can’t find its max rpm online anywhere, it might be able to handle it a couple times, can’t wait to see!! 💥
@Rckid28 any motor will spin till the epoxy gets to hot and the Kevlar shreds so keeping it cool between pulls it should last from what I’ve found that’s why my vendetta 3s motor never blew up on 6s 👍💯
@@earlmoorhead5555 interesting 🤔 what are max rpm ratings for?
@@Rckid28 max rpm rating are for power applied so 2S has one rating 3S has another rating and so on and if you use the motor consistently over spinning them it will heat up melt down or come apart
You should pick a different place to ride the bike so there's interference
Earl I got 4s I can send u I took off my outcast 4s
That would be cool I was going to pull it out of mine email me Moorhead.earl3@gmail.com 🙏
I told you
Earl we ( all of us ,-everyone) really appreciate your videos so PLEASE PLEASE don’t take this Suggestion the wrong way one UA-camr runs at closed down on weekends freight yards where you can see several empty loading docks where 18 wheelers usually back end - there is plenty of room for him to do his speed runs- it may be best to seek a place like that out- right now someone may hit you or you them- he calls his Super Speed Sundays or Saturdays that let’s us know those locations are closed on the weekends
Loading docs are not long enough
He’s in Florida big open areas I’m in California no areas that big
Maybe you could do it on Sundays- Just please be careful
@@kenknox6424 alway will be carful been speed running a long time with no one getting hurt and no damages to anyone property but my own believe it or not I truly make it safe even tho the videos doesn’t always show it that why make it more controversial for ppl to watch 🙏👍everyone has a right to suggest and leave a respectful comment on this channel 👍
@@earlmoorhead5555 kool hey I’m ordering some of those kool elbow pads- thought you’d like to know
What means to measure speed for a dirt bike??? Please pu the MOTOCROSS bike in the mud!
Promoto bike race on road as well ? In the Promoto series not sure what mud has to do with a promoto Mx bike ?
@@earlmoorhead5555 ...in my opinion, Promoto Losi is ONLY for jumps and mud. But it's only MY opinion .😁😃
Thank you.
Appreciate your support 🙏💯