Hey hi. I have a normal cast boiler with radiant floor heat. I want to run the boiler at 180 temp and the floor loop at 125 temp. So i installed a mixing valve on supply. I pipped the return to cold, the supply from boiler to hot and the supply to floor loop to mix. It will not work at all. Can you please help on why. I currently had to take out mixing valve and turn boiler down to 14o temp until I get this right. Thanks so much
1967 School. We have hot & cold decks, heating & cooling coils in fan room on 3rd Fl. But the 1st Fl never gets the cooling or heating. Is this mainly because the VAVs in the ceilings are bad, the stats are bad, the water temps are not enough, the water circulation is not enough, or the fan rooms duct system is bad? We hosed down the coils to clean them. We block the outside air because the dampers leak bad. We try taking the stat out and connecting the lines for max cooling or plug the line for max heat. Change filters for good air circ. Water temp to coils 110-120 in winter not enough.
Should do a video showing the setup and adjustment of stroke on the JCI actuators on the various valve bodies. Then I could share that with techs calling me to help troubleshoot their new actuator that isn't adjusted right and won't open fully.
This was very informative, thank you.
Controls please. This video is awesome thank you. I need to learn as much as I can.
This is a very informative and useful training video! Thanks
Thanks Paul, we appreciate you checking in!
ua-cam.com/video/A9a594yX07A/v-deo.html
Great video. Simple and straig to the point 👌
Hey hi. I have a normal cast boiler with radiant floor heat. I want to run the boiler at 180 temp and the floor loop at 125 temp. So i installed a mixing valve on supply. I pipped the return to cold, the supply from boiler to hot and the supply to floor loop to mix. It will not work at all. Can you please help on why. I currently had to take out mixing valve and turn boiler down to 14o temp until I get this right. Thanks so much
ua-cam.com/video/A9a594yX07A/v-deo.html
Whay install temperature sensor in in and out of coil?
Is this playlist relevant to natural gas pipelines and pressure regulators in industrial commercial application? Great video regardless
I want to distribute the fluid with two different flow rates to two outlet. Is it works? Is there any solution?
ua-cam.com/video/A9a594yX07A/v-deo.html
1967 School. We have hot & cold decks, heating & cooling coils in fan room on 3rd Fl. But the 1st Fl never gets the cooling or heating. Is this mainly because the VAVs in the ceilings are bad, the stats are bad, the water temps are not enough, the water circulation is not enough, or the fan rooms duct system is bad? We hosed down the coils to clean them. We block the outside air because the dampers leak bad. We try taking the stat out and connecting the lines for max cooling or plug the line for max heat. Change filters for good air circ. Water temp to coils 110-120 in winter not enough.
ua-cam.com/video/A9a594yX07A/v-deo.html
Thanks for your video its help for my Profession.
ua-cam.com/video/A9a594yX07A/v-deo.html
Great video. Thank you!
ua-cam.com/video/A9a594yX07A/v-deo.html
Nice cutaways
its really useful good video
very fine explanation. thanks!
ua-cam.com/video/A9a594yX07A/v-deo.html
Thank you
Excellent.. Thanks for video
ua-cam.com/video/A9a594yX07A/v-deo.html
Similar to 2-way and 3-way valves, are there 2-way and 3-way dampers? especially, butterfly type dampers?
ua-cam.com/video/A9a594yX07A/v-deo.html
Very useful, thanks
Should do a video showing the setup and adjustment of stroke on the JCI actuators on the various valve bodies. Then I could share that with techs calling me to help troubleshoot their new actuator that isn't adjusted right and won't open fully.
ua-cam.com/video/A9a594yX07A/v-deo.html
I request to you put video for full piping connection with accessories between cooling Tower, chiller, AHU.
ua-cam.com/video/A9a594yX07A/v-deo.html
Is that the Parkland CUP in the background?
ua-cam.com/video/A9a594yX07A/v-deo.html
Is 3 way valve connected in supply or return of ahu? And why?
ua-cam.com/video/A9a594yX07A/v-deo.html
Great vid appreciate it
ua-cam.com/video/A9a594yX07A/v-deo.html
Informative video 👍
Thanks so much, glad yoo enjoyed the video, are there any other viideos you would like to see us make?
ua-cam.com/video/A9a594yX07A/v-deo.html
Thanks
ua-cam.com/video/A9a594yX07A/v-deo.html
Control. Thanks!
ua-cam.com/video/A9a594yX07A/v-deo.html
How to open 2 way valve
ua-cam.com/video/A9a594yX07A/v-deo.html
Control...thank you in adv.
ua-cam.com/video/A9a594yX07A/v-deo.html
thanks man
ua-cam.com/video/A9a594yX07A/v-deo.html
Valves
ua-cam.com/video/A9a594yX07A/v-deo.html
Control please
ua-cam.com/video/A9a594yX07A/v-deo.html
Control..thanks
ua-cam.com/video/A9a594yX07A/v-deo.html
Valves!
👍🏼
ua-cam.com/video/A9a594yX07A/v-deo.html
CONTROL
Thanks on it!
ua-cam.com/video/A9a594yX07a/v-deo.html
Hi
Control/valves
ua-cam.com/video/A9a594yX07A/v-deo.html
valves
Thanks Robby, working omit. Thanks for the comment and checking us out
ua-cam.com/video/A9a594yX07a/v-deo.html
controls
VALVES
ua-cam.com/video/A9a594yX07A/v-deo.html
Control
Ahmed elfawy
Controls
control
ua-cam.com/video/A9a594yX07a/v-deo.html
valve
Valves
Control
Ahmed elfawy
control
valves
ua-cam.com/video/A9a594yX07A/v-deo.html
Valves
Control
valves
control
ua-cam.com/video/A9a594yX07a/v-deo.html
Valves
Control
control
ua-cam.com/video/A9a594yX07a/v-deo.html
Control
control
ua-cam.com/video/A9a594yX07a/v-deo.html
Control
control
ua-cam.com/video/A9a594yX07a/v-deo.html
Control
control