joeynhl87 What makes Drac a loser when he's doing something he's interested in? It's not harming you, so why are you so against it? I'm personally not into Nerf but I find these videos interesting and entertaining.
BT Nguyen I meant the next time I did a project like this. I obviously wasnt going to stop the entire setup, clean up, drive to go purchase cheap gloves, and then come back to it.
Your channel is great, I'm fascinated by the mechanisms of nerf guns and the way they work, but watching your how to videos(even if I never actually tried the mod myself) I learn oboist the mechanics of it all. Keep up the great work
since i work a lot with this type of stuff, i should give you some trick about these finishing product, to get a perfect finish you have to: -have room temperature water -let the sheet rest for 30 to 45 seconds on the water -spray the activator -wait 45 to 60 seconds -dip the object at 30 degree and at a slow and constant pace! it is really important to be constant if you want the motifs to be perfects. -wait it to be perfectly dry (about 30 minutes) to apply the protection hope it will help you in the future and keep up the great work!
Drac, your B.A.T.o.N could fit with your holster that leatherstorm made for you right? So you could make like your vampiric nerf battle set of gear. So, the nosferatu your primary, the B.A.T.o.N your secondary, your helmet the head protection, and leatherstorm's holster that he made for you for your B.A.T.o.N
LordDraconical did you add the spray activator just for the sake of having the plastic film spread giving it a cool design or was that an actual step used in hydro dipping
hey drac, my primary just broke, so im looking fir a replacement. So i was wondering how much would a strayven with a paint job and two 18 sticks painted to match the blaster cost?
Damn, it looks nice. the only problem with doing this where I live is that there is a request to eliminate at least 10% of water usage until the drought is fixed. But your dog is adorable.
Lmao. I'm poor so imma try to do the same thing but with the hammerstorm. Or should I buy a hammer shot and REALLY sand down the grip until it's smooth?
Hey Drac i have a cool challenge for you to try with NoM Bobo and all you other buddies. Try making a titan that instead of shooting the whole tank each shot then pumping again, try making one that only shoots short bursts of air so you can get several shots of before pumping, and of course i believe you can do it, because you and the other guys are great modders. Sincerely, TheEthoFan P.S. If you do attempt this i wouldnt mind a video for it and a shoutout.(this is not a commision)
LordDraconical Good on you for rescuing a dog from the shelter c: I guess you didn't have much of a choice, most breeders wouldn't allow a vampire to have one of their dogs. ;)
Zarubikon That can't be right. If he'd name his gun partially ass, why does he have an aversion to saying it? Why would he name his gun if he for whatever reason disliked the term ass?
I am in the middle of making a rebelle with hammershot internals and it takes a good 1day of sanding the shell, trigger and hammer. For the paint job I can't say.
It is actually pretty cheap, $40 AUD for a Hammershot and Sweet Revenge and film and activator is relatively cheap and so is spray paint, I bought an 8 kilo spring for $10 so for making it yourself it is about $100
I don't own Nerf guns, I don't play Nerf, I don't mod Nerf... Why the hell are these videos so addicting and entertaining to me?!
I know right same for me
Same this dudes a fucking loser but i cant stop watching
joeynhl87 What makes Drac a loser when he's doing something he's interested in? It's not harming you, so why are you so against it? I'm personally not into Nerf but I find these videos interesting and entertaining.
I think I like the videos so much because he really seems to enjoy what he is doing. Makes me smile every time I watch a video.
Same here
Who thinks he should have ghost in all the video hes awesome
Dan Botich thanks thought it would be cool
Dan Botich Mod some Dog friendly style Nerf guns. Send Ghost into HVZ match.
***** Tennis ball launcher for special zombies and a Flywheel blaster rigged with a bone that she carries in her mouth!
Trayson Martin Back mounted or on a trolley being pulled?
***** Back mounted for the fear factor stealth factor and it can all be rigged on a light weight plate carrier.
Nice job Drac, I can't wait to try my hand at hydro dipping.
I like how you say "probs should wear gloves next time" and the next time you didn't xD live and learn am I right?
BT Nguyen I meant the next time I did a project like this. I obviously wasnt going to stop the entire setup, clean up, drive to go purchase cheap gloves, and then come back to it.
LordDraconical You don't own gloves?
LordDraconical your really good at this stuff. do more plz?
+The Pyro Bros he aught
+LordDraconical I don't mind ghost she/he's cute
Your channel is great, I'm fascinated by the mechanisms of nerf guns and the way they work, but watching your how to videos(even if I never actually tried the mod myself) I learn oboist the mechanics of it all. Keep up the great work
since i work a lot with this type of stuff, i should give you some trick about these finishing product, to get a perfect finish you have to:
-have room temperature water
-let the sheet rest for 30 to 45 seconds on the water
-spray the activator
-wait 45 to 60 seconds
-dip the object at 30 degree and at a slow and constant pace! it is really important to be constant if you want the motifs to be perfects.
-wait it to be perfectly dry (about 30 minutes) to apply the protection
hope it will help you in the future and keep up the great work!
"Woo, that I some toxic stuff!" Proceeds to dump into his yard
Drac, the new Doomlands Lawbringer came out. It's basically a re-shelled 12-dart Hammershot. You'll love it
If Drac painted the white chipped part silver to match the writing it could make a good finish. Over all a great blaster! :3
what about the underwater shots?
The Nosferatu and B.A.T.o.N together would look great as a channel picture
B. ad
A. wesome
T. ool
o. f
N. erf
It's bad ass tool of nerf
Zarubikon im pre sure he knows... he was mucking around because drac cant say ass in his vid
Noah Heise the shark in your profile pic is bad and awesome
How do you dry it? Do you just let it dry in the sun or do you dry it yourself?
And how do you make and sew the leather grip?
how do you wrap the handle? it looks great and covers the stupid zombie strike bandage effect really well
i noticed there was a carbon fiber print for hydro diping and i just thought you should try it
Drac, your B.A.T.o.N could fit with your holster that leatherstorm made for you right? So you could make like your vampiric nerf battle set of gear. So, the nosferatu your primary, the B.A.T.o.N your secondary, your helmet the head protection, and leatherstorm's holster that he made for you for your B.A.T.o.N
Wow... I think this video almost alone inspired me to at least look into Nerf modding. Bravo, and good job.
Drac do you do commissions?
would the hammershot steel trigger set work on a sweet revenge?
would u recommend hydro dipping a nerd modules
How do u twirl the blaster on your finger, if u can can u do it in a video if you haven't done the spylight blaster for rebelle
Wear did you get the stuff that you dipped the Shel in
That looks extremely cool! If those were in stores I'd buy one!
Drac!
Tansparent plastic dip.
Let that thought settle in.
I'll be waiting for the video
Can I use Hammershot mods for a sweet revenge? Specifically the 7 shot cylinder?
Will the 5x5 blaster accept an 8-round cylinder?
LordDraconical did you add the spray activator just for the sake of having the plastic film spread giving it a cool design or was that an actual step used in hydro dipping
blaze simmer Its necessary to liquidate the film into ink using the activator before the dip.
LordDraconical alright then on to my follow up question what would happen if a person didn't use the activator
blaze simmer it's like dunking a piece of paper
cw3040 ohhh now i see
hey drac, my primary just broke, so im looking fir a replacement. So i was wondering how much would a strayven with a paint job and two 18 sticks painted to match the blaster cost?
Hey drac what do you think if you combined 2 roughcuts and a zombie strike crossbow(-the bow part awesome shotgun maybe?)
Where can I get that leather wrap? Want to c if it'll look good on an airsoft gun.
Damn, it looks nice. the only problem with doing this where I live is that there is a request to eliminate at least 10% of water usage until the drought is fixed.
But your dog is adorable.
In the future, could you integrate an O-Tac Hammershot turret into a Sweet Revenge?
Lmao. I'm poor so imma try to do the same thing but with the hammerstorm. Or should I buy a hammer shot and REALLY sand down the grip until it's smooth?
can you tell me where you bye the paint dipping stuff please?
LordDraconical I think having your dog in the video was nice! I didn't think you had a dog. I think you should feature her more in your vids! 😊
I love all your revolvers and this one is probably my favourite
What grit would you recommend to remove labels and logos
So Drac, would you say you give Three Cheers for Sweet Revenge?
how much do i'm joking?, were did you get the black thing from and how much was the gun?
But can you use the baton to baton knives?
How much would it cost to commission this exact build with a different paint job?
are you going to still use the artimesia, sorry if i didn't spell that right
Since you like the hammer shot so much, you're gonna love duel-wielding the Lawbringers.
So you made a sidearm for the nosferatu?
drac please tell me where you got that film or send me a link for it because i want to attempt this
Hey Drac i have a cool challenge for you to try with NoM Bobo and all you other buddies. Try making a titan that instead of shooting the whole tank each shot then pumping again, try making one that only shoots short bursts of air so you can get several shots of before pumping, and of course i believe you can do it, because you and the other guys are great modders.
Sincerely, TheEthoFan
P.S. If you do attempt this i wouldnt mind a video for it and a shoutout.(this is not a commision)
HPA...
Drac what breed is your dog,she looks beautiful
Kevin/Nathan Shes a rescue mutt, we have no idea what shes made of.
LordDraconical Good on you for rescuing a dog from the shelter c: I guess you didn't have much of a choice, most breeders wouldn't allow a vampire to have one of their dogs. ;)
+Kevin/Nathan Looks like some spaniel/labrador, with a breed of terrier I can't specify thrown in there for good measure.
Where is that hydro dip film from? I'm already guessing but I'm not really sure.
I feel like the baton and the argonaut would look great dual wielded
Benjamin Joubert yeah, the blue and red designs would contrast great
Just a tip drac make a masking tape boarder n make cuts in your boarder help with your graphic stretch
So if you throw the B.A.T.o.N. to someone, do they get all the tags you scored?
Really like this mod u did :D How much would a commission cost on a Nerfgun like that?
So what did you do with the gopro footage
Where did you get the material for the hydro dip?
I love this, how hard was the transplant dude? i love the power and precision of this!
Do you have a webshop or something like that
Wow! good job Drac!
Drac can you dip a strife in that color dip
He already did
I was actually thinking of picking up some stuff from mydipkit to use for nerf, looks like you beat me to it.
Hail Hydra (dipping)
Havanadog 7 lol nice reference
What was the point of putting your go pro in the bucket and wheel barrel if you didn't add it in?
Maybe he didn't think it would show his face.
NerfGeek364 he has already shown his face in a video
jade lange When has he shown his face? As far as I know, he has never shown his face in any of his videos.
why in England is the Sweet revenge so underrated, it performs well, stock and modded, its also a brilliant candidate for paintjobs
It's looks good can't wait to see more
Has anyone figured out what the A stands for yet?
***** alimentation
It's ass in like bad ass
Zarubikon no dip
Zarubikon That can't be right. If he'd name his gun partially ass, why does he have an aversion to saying it? Why would he name his gun if he for whatever reason disliked the term ass?
***** My fun. You ruined it.
thats a nice looking rebelle pistol
Where did u get the print from
Can i buy one of these
I feel u with this South Side weather
what film is this and do you have a link
Is his right pointer finger bleeding in 3.34
How much money is a commission
First! Btw great video and keep up the good work :D
Will u sell them
where did you get that plastic film that you put in the water?
The Furry Squirrel idk
What about the go pro forage
Calamari Carter Will be a separate bonus video after ive done enough in house dipjobs for it to be interesting.
Hay like the paint job
Will u be selling this
Drac all your mods are sweet
Hay Drac my 10 year old loves your channel and the rayven projets.
do u sell these
This is very good and looks realy cool!
what kinda film is that pls respond
What paint is that?
But Drac! What about the 7-shot cylinder?
Bobert Johnson now there is an 8 shot cylinder:)
Now there is 100 shot cylinder
Sry, but when i've seen your shover i thought that's from outlast or something
In California, wasting so emptying a large wheelbarrow of water would be considered a waste on so many levels. Luckily you love in Georgia, though!
Nobody minded the dog. It was cute!
I bet you can't make a bullpup rapidstrike
Great job on the gun, Drac! Also, more of your dog, she's so cute! =)
What kind of dog is ghost
Amazing
Btw can I buy blasters from you?? Idk if my parents will let me but I hope I can because your custom blasters are cool and just mind blowing
LordDraconical How long does it usually take you to make something like this?
I am in the middle of making a rebelle with hammershot internals and it takes a good 1day of sanding the shell, trigger and hammer. For the paint job I can't say.
HOW DO I BUY THESE
You don't need to change anything else when you have the 8 kilogram then?
"ermturnals" 7:37
Ghost is awesome! More ghost please!
Why's gopros do u use
He records with video classes
can you buy these?
It is actually pretty cheap, $40 AUD for a Hammershot and Sweet Revenge and film and activator is relatively cheap and so is spray paint, I bought an 8 kilo spring for $10 so for making it yourself it is about $100
Are u the legendar27 ?
b.a.t.o.n:
bad ass tool of nerf