Man, I think that's a great choice! In my opinion, the 1980 is the best bang for your buck in the AVX Series! It's only 4 inches shorter than the 2080 and all of that is in the back. I think it runs in the mid to upper 50s with the 150hp motor. I wouldn't be opposed to running it at all. Thanks for watching my videos!
I have had the same issue with my spot lock. I re-paired it with my GPS and it has worked fine since. I looked silly doing circles but it worked so all who cares.
Check the drain tube under the recessed trolling motor pedal holder, mine was leaking into middle rod box. Simple drill hole and drop the tube through it, and water goes into bottom bilge. Ky
Thank you, sir. After my trip to Vexus, I think I'm good on all of those kinda things. They did an awesome job and were great to deal with! Thank you for watching!
Great video... honesty is a plus. Spot Lock SUCKS!!! I don't care what anyone says. When it's working & holding it's 5 stars all the way. BUT per my honest review on Minn Kota's site they should not spin in circles just because a GPS signal is lost, not ever (piss poor programming on the motherboard BIOS or firmware)
Buy me a ticket too! I’m considering the VX20, but I may go back with another 2080. It kinda depends on what I decide to do derbywise. If I just do videos and fish local stuff, I’ll prolly stay with the 2080. It does a nice job! Thanks for watching!
I picked an ADX190 in December. Towed it home (3 hour drive) in downpour. My starboard front deck compartment did get some standing water in it. I noticed the hinge was loose and the compression latch was also loose. I tightened the latch and hinge and that seems to make the hatch actually compress the gasket. Will see if that fixed my issue,
If it doesn’t fix it, call Vexus and I’m sure they’ll take care of any issue you may have. Thanks for watching and letting our community know what you’ve got going!
@@greggulledgefishingadventu2364 I have a 520 Comanche 2000 nothing I have been in even comes close as far as ride a little heavy but smoooooth and dry
Ive run a Ranger for years.... Since 1995 I’ve owned 7 and thought I’d never leave them, but I did this year... I ran, back in the day 518s and my last several were 519s with the 225s.. As you already know, solid plumbing,heavier gauge wiring,better switches, I could on and on.... I was just ready for a change.. Could’ve been turning 45 mid life thing 😂😂🤷♂️.... I looked at the boat your running very hard and almost pulled the trigger on one.. I liked the draft and the dead rise along with a few other thing because I needed that mid size boat I’ve always ran 19’ to 20’... I grew up on the Flint River in Ga. and at times will make a 30 mile run threw shoals and shallow rock flats that are 2’ and less.... Seriously,😂😂.. Fine art lol.. I’ve payed dearly to learn over the years passing the tunnel hulls leaving the boat basin at lake Seminole and headed up threw Hell Gates ☠️🤦🏻♂️... Just subscribed to your channel and enjoy all your content 🤙🤙.... I ended up going with the Phoenix 920 Pro with the Xs250...... Not sure if you’ve drove or rode in one yet but if you haven’t you should just for sh*ts and giggles... Hands down the most loaded out (features) and the diamond V hull design they have makes any Ranger I’ve ever had or rode in a #2 ride bye a goooood ways.. Bold statement, I know but seriously.. Is what it is, call it like I see it and always have....🤷♂️...... Not to mention being 20’6” with 50 gallons and separate giant live wells slap full,loaded with tackel, tournament ready this thing will run 76 mph no matter what at least.... Buuuuut on the other hand, you have to absolutely, positivity drive the natural born sh*t out of it and it’s like walking a tightrope going that fast.. Don’t like that to much.. On the other hand, I can run 70mph at 3/4 throttle,a little over 5400rpms comfortably and I’m not killing the gas still passing most... Tight lines my friend 🙏🙏🤙🤙
Believe it or not, I had it narrowed down to the Phoenix and the Vexus 2080! The 920 is a super rig for sure. I knew getting out of the glass boat I would give up a little ride. I knew I needed shallow draft and hole shot to buzz around the Arkansas River. That's the main reason I went with the 2080. Thanks for your support!
Todd Spindler must have small running pad on the bottom, I had one the old venture boats that had that, and it would run 60 with 150 on it, but had to really drive it when it got up that small pad. Price you pay for speed. Soon as you throttle back small amount, sits down off that pad, drives great at about 50
weaintfree 100% fact....... Another tip I can give is, the Mercury PRO XS 250 2 -stroke.......... beware!! Another 100% fact... they will drop a cylinder, more then likely #5 for lack of old after 250 hours.... 6 out of 10 motor will fail... Fact jack...
I like the looks of a Vexus but have not ridden in one. I like several different aluminum boats and have fished out of Ranger, express, war eagle and I drive a 190 Tracker TX which really surprised me on ride and drive. At my age I best get a ride in a Vexus this year just to experience it. These Aluminum hulls have really came a long way in my 50 plus years of owning boats. Youngsters like to bash and be negative but most usually grow out of it. Loved the comment of being able to wipe oneself with leaves but the invent of toilet paper improves the experience, I will remember that for inexperienced commenters at the ramp.
Never Never Never Never bye a Alumium bass boat…Especially anything with a 150hp or more.. A alumium boat CAN NOT take the torque at the transom when planing off… This company is about to shut the doors over this issue.. They have 3400 boats to re hull at this time
Had to that happen couple of weeks ago. An I’ve had trouble getting to take gas until you open the cap an let the pressure out, they told me that my boat had the recall done but I’am wondering about.
Greg Gulledge Fishing Adventures Dangdest thing I’ve ever seen in my 62 years for sure... Just got the ice off the lakes and then the state shuts all the lakes off!!... And, I’ve got gas in the boat that needs to be burned along with new plugs that the package says will guarantee me catching more bass...
I’ve got a video dropping in an hour or two where I say I’ve been in a Ranger since 92. I thought about after I said it. I actually bought a 360 in 91. I wish I still had it just to sit it in the barn and restore!
My Ranger RB 200 soaks me with a cross wind. I fish Toledo Bend where cross lanes run east and west. South winds are like going through a car wash. I would like to know if your Vexus has the same problem? My boat throws the water spray straight up. I would like to get away from White River (Ranger) and find a better company that works with you with issues. I appreciate your input. Thanks.
I bought a 1980 boat have had a lot of minor problems. Problem is the dealer takes for ever to fix. The auto bilge never worked and boat filled with water and had some electrical problems not sure if that was it.. Vexus customer service has been very disappointing with these problems . Boat been in shop more than on water.
How stable is the bow when walking around? Some Aluminum boats are tippy on the bow. I know glass is the best when it comes to bow stability but I'm curious how stabil your Vexus is.
Could the water have gotten in the center compartment via the seat base hope? If so maybe some sort of cap or plug when towing or fishing when the seat in not in. Just a thought. Thanks for the video!
I think it's possible. There is an aftermarket plug made for this. There is some type of drain that sometimes get clogged up with carpet fuzz, etc. and I believe mine was stopped up. It got cleaned out during my visit. Thanks for watching and your help!
On one occasion, so it was narrated, Stalin called for a live chicken and proceeded to use it to make an unforgettable point before some of his henchmen. Forcefully clutching the chicken in one hand, with the other he began to systematically pluck out its feathers. As the chicken struggled in vain to escape, he continued with the painful denuding until the bird was completely stripped. “Now you watch,” Stalin said as he placed the chicken on the floor and walked away with some bread crumbs in his hand. Incredibly, the fear-crazed chicken hobbled toward him and clung to the legs of his trousers. Stalin threw a handful of grain to the bird, and it began to follow him around the room, he turned to his dumbfounded colleagues and said quietly, “This is the way to rule the people. Did you see how that chicken followed me for food, even though I had caused it such torture? People are like that chicken. If you inflict inordinate pain on them they will follow you for food the rest of their lives.”
I did bring that up yesterday while up at the plant. With the positioning of the fuel tank under the seats, it's doesn't seem possible as of now. Thanks for watching!
@@greggulledgefishingadventu2364 I've had mine a year now and never had a update. They probably didn't do it to your boat. Just configurate it. Should be good. You'll see it on settings on remote and all u do is 2 complete circles with your big motor
I honestly don’t know, but I’ve never had a boat and motor combo that has gotten this many trips and used as little fuel. I came out of a 520 Ranger/Honda 225 and it was really good on fuel! Hope this helps. ua-cam.com/video/3IH89nEUR3c/v-deo.html
As it turns out, I had a drain that was stopped up that may have contributed to that. They cleaned it out while it was at Vexus. I'm not condoning it it at all, but I did drive thru a true tropical storm. I've never seen rain and wind like that. It was nuts! Thanks for watching!
Greg Gulledge Fishing Adventures -thanks for the reply. When you described the sound the gas cap made when you took it off-gas caps have vents, or there is a vent somewhere in that boats fuel system that is not venting.. Having pressure in your fuel system like that is very dangerous. A car gas tank has a vent. My boat the gas cap has a vent. I am guessing that is what your recall is about. But either way open that cap up every few hours so you don't blow up.
Great Video!! I’m debating between the AVX 1980 and 1880. The 1980 seems to be the best all around. I do have a question for you though, ate you planning to put Power Poles on it?
Probably will put them on it at some point. I agree. I think the 1980 is the most bang for the buck! I'm actually at the Vexus plant while I'm typing this! Lol
@@greggulledgefishingadventu2364 I'm seriously thinking of buying a new boat and stopped at a Vexus Dealer a few hours ago. Last week, I researched their website and clicked on their "Build your Boat" section. Since you were at the factory, do you have any idea how long it takes to build and deliver a boat to order? Thank You.
I had the condensation issue with the Ranger. That was about it. Basically, it was time for a new boat! Thanks for watching! I've got another Vexus video coming out tomorrow!
Trailer issues were mostly bearing/hub related. It also sounded like the end of the world coming down the road. The motor was still very runable. As far as repowering, I think I was just ready for a change!
Did you service the trailer bearings once a year? Not trying to be overly nosy but just thinking about ranger myself. pretty meticulous about servicing trailers myself once a year so just curious if you had that done and it was still bad
That is very true. When I started fishing I caught tons out of a two man boat with only a trolling motor. You can also wipe your butt with leaves, but 2 ply tp feels a lot better! lol Thanks for watching!
Every boat has little things you have to work through. I watch all these pros on UA-cam and they are always messing with this or that. I mean MLF and BASS when I say pro not the Googan Squad.
Somebody really dropped the ball on these models.. Every alumium rig they put out the door has to be re hulled.. Dangerous when cornering, super slow which naturally gives you the good ride (2300lb boat with a 115hp) Wow.. 41 mph with the hulls splitting because planing off it twists the transom terribley.. Company going bankrupt now.. over 3000 to rework as today.. Ask me how I know
Thank you Greg for your honesty! I'm working towards a AVX 1980 in my future!!!
Man, I think that's a great choice! In my opinion, the 1980 is the best bang for your buck in the AVX Series! It's only 4 inches shorter than the 2080 and all of that is in the back. I think it runs in the mid to upper 50s with the 150hp motor. I wouldn't be opposed to running it at all. Thanks for watching my videos!
I have had the same issue with my spot lock. I re-paired it with my GPS and it has worked fine since. I looked silly doing circles but it worked so all who cares.
Check the drain tube under the recessed trolling motor pedal holder, mine was leaking into middle rod box. Simple drill hole and drop the tube through it, and water goes into bottom bilge. Ky
Thank you, sir. After my trip to Vexus, I think I'm good on all of those kinda things. They did an awesome job and were great to deal with! Thank you for watching!
Really love the Vexus boats, hope to get one someday.
They are nice boats for sure! Thanks for watching!
Great video... honesty is a plus. Spot Lock SUCKS!!! I don't care what anyone says. When it's working & holding it's 5 stars all the way. BUT per my honest review on Minn Kota's site they should not spin in circles just because a GPS signal is lost, not ever (piss poor programming on the motherboard BIOS or firmware)
It definitely could be better! Mine acts a fool every once in a while!
I want the VX21. Headed to the store to buy a lotto ticket now. lol
Buy me a ticket too! I’m considering the VX20, but I may go back with another 2080. It kinda depends on what I decide to do derbywise. If I just do videos and fish local stuff, I’ll prolly stay with the 2080. It does a nice job! Thanks for watching!
I picked an ADX190 in December. Towed it home (3 hour drive) in downpour. My starboard front deck compartment did get some standing water in it. I noticed the hinge was loose and the compression latch was also loose. I tightened the latch and hinge and that seems to make the hatch actually compress the gasket. Will see if that fixed my issue,
If it doesn’t fix it, call Vexus and I’m sure they’ll take care of any issue you may have. Thanks for watching and letting our community know what you’ve got going!
@@greggulledgefishingadventu2364 hahahahahahahaha with over 3000 to re hull I bet they don’t.. There going bankrupt as we speak.. ask me how I know
Would like for you to let us know if you end up having to make a long run back in big rollers how it does. Good honest reporting is refreshing
I haven't had to yet, but you can bet I will! Hope the cam is rolling! Thanks for watching!
@@greggulledgefishingadventu2364 I have a 520 Comanche 2000 nothing I have been in even comes close as far as ride a little heavy but smoooooth and dry
Ive run a Ranger for years.... Since 1995 I’ve owned 7 and thought I’d never leave them, but I did this year... I ran, back in the day 518s and my last several were 519s with the 225s.. As you already know, solid plumbing,heavier gauge wiring,better switches, I could on and on.... I was just ready for a change.. Could’ve been turning 45 mid life thing 😂😂🤷♂️.... I looked at the boat your running very hard and almost pulled the trigger on one.. I liked the draft and the dead rise along with a few other thing because I needed that mid size boat I’ve always ran 19’ to 20’... I grew up on the Flint River in Ga. and at times will make a 30 mile run threw shoals and shallow rock flats that are 2’ and less.... Seriously,😂😂.. Fine art lol.. I’ve payed dearly to learn over the years passing the tunnel hulls leaving the boat basin at lake Seminole and headed up threw Hell Gates ☠️🤦🏻♂️... Just subscribed to your channel and enjoy all your content 🤙🤙.... I ended up going with the Phoenix 920 Pro with the Xs250...... Not sure if you’ve drove or rode in one yet but if you haven’t you should just for sh*ts and giggles... Hands down the most loaded out (features) and the diamond V hull design they have makes any Ranger I’ve ever had or rode in a #2 ride bye a goooood ways.. Bold statement, I know but seriously.. Is what it is, call it like I see it and always have....🤷♂️...... Not to mention being 20’6” with 50 gallons and separate giant live wells slap full,loaded with tackel, tournament ready this thing will run 76 mph no matter what at least.... Buuuuut on the other hand, you have to absolutely, positivity drive the natural born sh*t out of it and it’s like walking a tightrope going that fast.. Don’t like that to much.. On the other hand, I can run 70mph at 3/4 throttle,a little over 5400rpms comfortably and I’m not killing the gas still passing most... Tight lines my friend 🙏🙏🤙🤙
Believe it or not, I had it narrowed down to the Phoenix and the Vexus 2080! The 920 is a super rig for sure. I knew getting out of the glass boat I would give up a little ride. I knew I needed shallow draft and hole shot to buzz around the Arkansas River. That's the main reason I went with the 2080. Thanks for your support!
Todd Spindler must have small running pad on the bottom, I had one the old venture boats that had that, and it would run 60 with 150 on it, but had to really drive it when it got up that small pad. Price you pay for speed. Soon as you throttle back small amount, sits down off that pad, drives great at about 50
Ranger (sadly) “ain’t” what they once were.
weaintfree 100% fact....... Another tip I can give is, the Mercury PRO XS 250 2 -stroke.......... beware!! Another 100% fact... they will drop a cylinder, more then likely #5 for lack of old after 250 hours.... 6 out of 10 motor will fail... Fact jack...
Lack of oil I meant
I like the looks of a Vexus but have not ridden in one. I like several different aluminum boats and have fished out of Ranger, express, war eagle and I drive a 190 Tracker TX which really surprised me on ride and drive. At my age I best get a ride in a Vexus this year just to experience it. These Aluminum hulls have really came a long way in my 50 plus years of owning boats. Youngsters like to bash and be negative but most usually grow out of it. Loved the comment of being able to wipe oneself with leaves but the invent of toilet paper improves the experience, I will remember that for inexperienced commenters at the ramp.
Never Never Never Never bye a Alumium bass boat…Especially anything with a 150hp or more.. A alumium boat CAN NOT take the torque at the transom when planing off… This company is about to shut the doors over this issue.. They have 3400 boats to re hull at this time
Thanks for your honesty! It’s refreshing
Thanks for watching!
Had to that happen couple of weeks ago. An I’ve had trouble getting to take gas until you open the cap an let the pressure out, they told me that my boat had the recall done but I’am wondering about.
I’m not having any trouble getting mine to take gas, but it’s still building up pressure when the weather is warm. I’m gonna contact Vexus about it.
Similar to my experience with my 1880... Stay safe down there... Thnx
Thanks! Y'all stay safe! We're going thru a crazy time for sure!
Greg Gulledge Fishing Adventures Dangdest thing I’ve ever seen in my 62 years for sure... Just got the ice off the lakes and then the state shuts all the lakes off!!... And, I’ve got gas in the boat that needs to be burned along with new plugs that the package says will guarantee me catching more bass...
I still have my 361 that I purchased new in 1991. It is a beast! I will never sell it!
I’ve got a video dropping in an hour or two where I say I’ve been in a Ranger since 92. I thought about after I said it. I actually bought a 360 in 91. I wish I still had it just to sit it in the barn and restore!
My Ranger RB 200 soaks me with a cross wind. I fish Toledo Bend where cross lanes run east and west. South winds are like going through a car wash. I would like to know if your Vexus has the same problem? My boat throws the water spray straight up. I would like to get away from White River (Ranger) and find a better company that works with you with issues. I appreciate your input. Thanks.
Hey Greg. Have the contractors started on repairing the dam at Lake Monticello yet? I’m in Camden. Ar.
Not that I know of, but I’m not in the area very much. I’m in the process of moving to north Arkansas.
I bought a 1980 boat have had a lot of minor problems. Problem is the dealer takes for ever to fix. The auto bilge never worked and boat filled with water and had some electrical problems not sure if that was it.. Vexus customer service has been very disappointing with these problems . Boat been in shop more than on water.
How stable is the bow when walking around? Some Aluminum boats are tippy on the bow. I know glass is the best when it comes to bow stability but I'm curious how stabil your Vexus is.
The 2080 is very stable. It’s is actually more stable than a lot of glass boats. I’ve had several guys who have fished with me remark about it.
Could the water have gotten in the center compartment via the seat base hope? If so maybe some sort of cap or plug when towing or fishing when the seat in not in. Just a thought. Thanks for the video!
I think it's possible. There is an aftermarket plug made for this. There is some type of drain that sometimes get clogged up with carpet fuzz, etc. and I believe mine was stopped up. It got cleaned out during my visit. Thanks for watching and your help!
I seen on on the lake yesterday it was nice I would like to have one
I'm loving mine! You usually don't see storage like this in an aluminum boat. It's not complicated and I like that! Thanks for watching!
@@greggulledgefishingadventu2364 I just built one lol need to pull the trigger
Which one are you looking at?
@@greggulledgefishingadventu2364 avx 1890
That's a nice rig! I do suggest getting the ultrex.
On one occasion, so it was narrated, Stalin called for a live chicken and proceeded to use it to make an unforgettable point before some of his henchmen. Forcefully clutching the chicken in one hand, with the other he began to systematically pluck out its feathers. As the chicken struggled in vain to escape, he continued with the painful denuding until the bird was completely stripped. “Now you watch,” Stalin said as he placed the chicken on the floor and walked away with some bread crumbs in his hand. Incredibly, the fear-crazed chicken hobbled toward him and clung to the legs of his trousers. Stalin threw a handful of grain to the bird, and it began to follow him around the room, he turned to his dumbfounded colleagues and said quietly, “This is the way to rule the people. Did you see how that chicken followed me for food, even though I had caused it such torture? People are like that chicken. If you inflict inordinate pain on them they will follow you for food the rest of their lives.”
so what boat do you recommend?
Looks like a solid vessel! Nice video
I like it. There are some real pluses that help me fish like I want to. I'm going to the plant tomorrow! Can't wait!
Greg Gulledge Fishing Adventures make a video let us know how it goes!
What type of speed do you get out of this boat loaded out with fuel and tackle ?
By myself and loaded, I can get 66. With my tournament partner and all of his stuff loaded, I'm getting 63. Thanks for watching!
Maybe a vented gas cap will fix that problem.
I'm thinking it is supposed to be. I appreciate your help and thanks for watching!
Awesome boat bro! And channel keep it up!
Thanks buddy!
We have the polyera flooring and are compartments are alway dry in down pours
What is polyera?
Greg Gulledge Fishing Adventures non-carpeted flooring, wayy better than stinky soggy carpet
The polyera is a non carpet flooring that is extremely strong and durable that you can power wash out. It’s like the flooring in bay boats. Love it!
This boat would be top of my list if they added the air ride seats.
I did bring that up yesterday while up at the plant. With the positioning of the fuel tank under the seats, it's doesn't seem possible as of now. Thanks for watching!
They should sponsor you.
That would be nice! Thank you!
Reconfigure your trolling motor off the remote on settings.
I think my unit needs an update as well. Thanks!
@@greggulledgefishingadventu2364 I've had mine a year now and never had a update. They probably didn't do it to your boat. Just configurate it. Should be good. You'll see it on settings on remote and all u do is 2 complete circles with your big motor
@@tegteg798 configurate? Huh? You mean calibrate? BTW, you need to do THREE circles when you do the calibration procedure
@Greg Cherry true. I was thinking of the Lowrance Point-1. Both need calibration for the same reasons.
When two ppl are fishing on the deck. Is it stable or does it want to tip like most other aluminum boats?
Everyone who fishes with me remarks about how stable the boat is. We should be doing a video about this soon! Thanks for watching!
There isn’t a vent next to your gas cap?
How many gallons per hour do you burn?
I honestly don’t know, but I’ve never had a boat and motor combo that has gotten this many trips and used as little fuel. I came out of a 520 Ranger/Honda 225 and it was really good on fuel! Hope this helps. ua-cam.com/video/3IH89nEUR3c/v-deo.html
I hate to hear the boxes leaked water. That was 1 of there selling pitches.
As it turns out, I had a drain that was stopped up that may have contributed to that. They cleaned it out while it was at Vexus. I'm not condoning it it at all, but I did drive thru a true tropical storm. I've never seen rain and wind like that. It was nuts! Thanks for watching!
Greg Gulledge Fishing Adventures -thanks for the reply. When you described the sound the gas cap made when you took it off-gas caps have vents, or there is a vent somewhere in that boats fuel system that is not venting.. Having pressure in your fuel system like that is very dangerous. A car gas tank has a vent. My boat the gas cap has a vent.
I am guessing that is what your recall is about. But either way open that cap up every few hours so you don't blow up.
Great Video!! I’m debating between the AVX 1980 and 1880. The 1980 seems to be the best all around. I do have a question for you though, ate you planning to put Power Poles on it?
Probably will put them on it at some point. I agree. I think the 1980 is the most bang for the buck! I'm actually at the Vexus plant while I'm typing this! Lol
Greg Gulledge Fishing Adventures Awesome!! If you get a chance, check out the Black Widow AVX 1980. I saw it at the classic and that thing is SWEET!!!
I did not see one. They build each boat for an order. There really aren't many sitting around. They were busy building em!
@@greggulledgefishingadventu2364 I'm seriously thinking of buying a new boat and stopped at a Vexus Dealer a few hours ago. Last week, I researched their website and clicked on their "Build your Boat" section. Since you were at the factory, do you have any idea how long it takes to build and deliver a boat to order? Thank You.
Also, did you have any of those issues with the ranger?
I had the condensation issue with the Ranger. That was about it. Basically, it was time for a new boat! Thanks for watching! I've got another Vexus video coming out tomorrow!
so what was the reason you sold the ranger?
I had a lot of hours on the motor and the trailer was junk.
10-4. Good to know. What was the problem with the trailer?
Also, if trailer was good, would you have considered repowering?
Trailer issues were mostly bearing/hub related. It also sounded like the end of the world coming down the road. The motor was still very runable. As far as repowering, I think I was just ready for a change!
Did you service the trailer bearings once a year? Not trying to be overly nosy but just thinking about ranger myself. pretty meticulous about servicing trailers myself once a year so just curious if you had that done and it was still bad
Just Subscribed
I seen on another guys channel mikeyballz had that fixed it had to do with the wiring being together and the signals getting crossed up.
Thanks for the help and for watching!
No problem. I'll be keeping an eye on your channel you seem interesting.
🔥🔥🔥🔥
Thanks for watching! Stay safe in this crazy time we live in!
Skeeter....all the way
They're good boats. I fish outta one from time to time. Thanks for watching!
@@greggulledgefishingadventu2364 yes sir ....that is a good looking boat ......
Thanks buddy! I'm enjoying it.
No way
@@scottfrost8956 what boat do you prefer.......
It seems like a lot of people are posting bad videos about vexus
Those really aren’t boat issues, except the moisture and the eye
You are correct. I love my boat! It’s everything I thought it would be and more!
@@greggulledgefishingadventu2364 I’ll be In the market for a crappie boat upgrade. I gotta have boat that goes 70+
$2,500 Starcraft boat catches just as much fish as these $45,000 boats
That is very true. When I started fishing I caught tons out of a two man boat with only a trolling motor. You can also wipe your butt with leaves, but 2 ply tp feels a lot better! lol Thanks for watching!
Right. Make that run from Toho to Kissimmee and back in 20mph wind. We’ll see how good that Starcraft fishes
@@greggulledgefishingadventu2364 🤣 LMFAO!!!
Every boat has little things you have to work through. I watch all these pros on UA-cam and they are always messing with this or that. I mean MLF and BASS when I say pro not the Googan Squad.
I'm not a big tinkerer. I just like concentrating on the fish. I may add some poles and either 360 or livescope.
Gator Trax has none of these problems and built second to none
Go talk to Kent Saxon
What is Gator Trax?
@@greggulledgefishingadventu2364 Google Gator Trax Boats
Somebody really dropped the ball on these models.. Every alumium rig they put out the door has to be re hulled.. Dangerous when cornering, super slow which naturally gives you the good ride (2300lb boat with a 115hp) Wow.. 41 mph with the hulls splitting because planing off it twists the transom terribley.. Company going bankrupt now.. over 3000 to rework as today.. Ask me how I know
AKU SUKA VIIDEONYA SENIOR
It is such a shame to pay that kind of money and have any issues at all!!!!
Any boat you buy will have a thing or two. This one has had fewer than any I’ve ever bought! I’m very pleased with it!
Buy a Tuffy. Better boat and probably save you some money