Install | AWE Exhaust Suite for BMW G8X M3/M4
Вставка
- Опубліковано 21 лип 2024
- Sara shows how to go about installing each of the three options in the AWE Exhaust Suite for the BMW G8X M3/M4, including the SwitchPath™ Exhaust, the Track Edition Exhaust, and the Non-Res Mid Pipes.
Important note: if you are installing your exhaust with the Non-Res Mid Pipes, begin your process at 24:13 to see where you will need to cut the factory exhaust, and then move on to your remaining components.
Video contents:
00:00 - Intro
00:17 - Overview
00:37 - Recommended tools
01:08 - Stock exhaust removal
01:27 - Cutting the factory exhaust (keeping factory mid pipes in place)
03:48 - Valve motor & hangar removal
05:05 - Inlet adapter installation (applies to both SwitchPath™ & Track)
05:31 - X-pipe installation (applies to both SwitchPath™ & Track)
06:10 - Overaxle pipe installations (applies to both SwitchPath™ & Track)
07:12 - SwitchPath™ (adapters, x-pipe, axle pipes already installed)
07:28 - Valve motor installation
09:19 - Valve harness extension installation
10:36 - SwitchPath™ muffler assembly
12:00 - SwitchPath™ muffler installation
12:24 - SwitchPath™ final adjustment & tightening front to back
15:10 - SwitchPath™ tip installation
16:36 - Track Edition (adapters, x-pipe, axle pipes already installed)
16:47 - Valve motor simulator bracket assembly & installation
19:20 - Track Edition rear section installation
20:04 - Track Edition final adjustment & tightening front to back
22:42 - Track Edition tip installation
24:13 - Non-Res Mid Pipes
24:25 - Cutting the factory exhaust for AWE Mid Pipes
25:59 - Factory mid pipe and hangar removal
28:17 - AWE Mid Pipe installation
31:13 - Wrap up - Авто та транспорт
Learn all about AWE's Exhaust Suite for the BMW G8X M3/M4 right this way: www.aweg8x.com
hell yeah!!! pleasure to watch!!!!!!
How is that wiring harness extension not going to rub through? Going to have to put inside of shielding or spacers or something.
The extensions do get tucked behind heat shielding.
How much will it cost to have the SwitchPath and the Mid pipes install at the PA location?
We do not offer installs at this time, but if you give us a call we can recommend a local shop if you need.
What brand cutters did you use for this install?
Snap-on cutters, Grip-on pipe cutter.
Do BMW OEM exhaust tips fit with the switchpath system?
Have not confirmed (or even tried) as we have our own tips for our system 👍
will there ever be a titanium version of the switchpath?
No plans. Deep, rich tones are our signature, so we forego the hollow tone tendencies of Ti
Is this compatible with unitronic midpipes?
Guessing this comment was for another video :) If you're asking about the RS 3, as long as the mid pipes are designed to work with the factory exhaust, they will work with our system.
@@awetuning oh, yes. Now I see :)
I wasn’t sure if I need to purchase AWE mid-pipes as well. I’m a novice when it comes to this stuff. I ordered the Track Edition for my ‘18 RS3. Can’t wait!