Should have closed the hood for both runs as we all drive with our hood closed obviously. Opening up the hood gives the filter pods more of an air source.
How do you like it compared to the burger intake? Do you think I will have any problem with either of them with snow or rain or dirt that might get in the engine bay?
Hey bro, your videos are amazing. I want to thank you because you always explain everything so detailed that looks easier to do it by my own. I wanna know if I can get an intake for my BMW 120ia sedan It’s a different one that it’ only sells that Mexico and China, can you help me with that?
How much did it gain with a proper Tune to suit new intake tho hard to tell, As a proper ECU retune removing all the emissions tuning will probably net more power than just the intake install.
I am so confused nowadays with modern cars. Many tuning shop told me no matter what you do with intake (high flow intake), ECU will compensate input value anyways. Meaning that these type of mods will not gain any extra HP. And then you prove it with significant amount of HP gain without any mapping. I am totally confused.
Is there any problem with back pressure if I just install the intake on the G80? Or do I have to do the ecu setup and re-adjust the back pressure? my G80 is equipped with an M performance exhaust. Is it okay to replace the intake without any settings?
did you run the dyno with the hood closed? its not really a true CAI? at $58.25 per HP, its not a great value. Even then, hood should be closed as it will draw in hot air when driving daily.
S58 is such a monster
Great DYI. Sounds great & the added HP gains was a plus.
This is what I was waiting for....
😜
As always, Kies with the best new stuff for the best new stuff. Keep up the great work.
Should have closed the hood for both runs as we all drive with our hood closed obviously. Opening up the hood gives the filter pods more of an air source.
Obviously, you’re not a golfer. Who dyno’s cars with the hood close ?
Nice to see back to back comparisons like this.
Sounds like Darth Vader riding his Battlecruiser. Nice stuff!
Awesome!! Wish I could get an M3 but happy with my 335i May change my intake now though!
Sounds so sick!!🔥🔥🔥🔥
How do you like it compared to the burger intake? Do you think I will have any problem with either of them with snow or rain or dirt that might get in the engine bay?
MST at it again with the sick intakes!
What happened to doing the three dyno runs and averaging it out?
Just picked up a M3 Comp. Excited to see what this does
I want to see some g80 front mount intakes
Turbo swop doesn't look bad as well plenty of space
Will there be a video on the 330i g20 mst intake?
Love the IOM green color Bryan...beautiful car👍👍...nice work!!
Awesome video Bryan car sounds fantastic cant wait to see what other mods you do 🏴👍🇬🇧👍
So about ~12hp with the MST intake and about ~14hp with the PSI midpipe.. This is looking like the two items I need to ask from Santa this year😃🎅🏿🎄
Kies.. does doing the front mount intake version give the same power increase? Thanks great vid!
love your vids helped me so much with my mods on my G82. Keep it up!
Ordered mine! Can't wait for it to arrive! Still can't make up my mind on which exhaust? It's so tough to tell from video.
Hi Brian enjoying the content just curious to know when will you be putting out some mini content you did say Tuesday's will be mini day
Great video!!! Did the car still run well with just intake and no tune? Or was it bogging at all?
Hey bro, your videos are amazing. I want to thank you because you always explain everything so detailed that looks easier to do it by my own. I wanna know if I can get an intake for my BMW 120ia sedan It’s a different one that it’ only sells that Mexico and China, can you help me with that?
How much did it gain with a proper Tune to suit new intake tho hard to tell,
As a proper ECU retune removing all the emissions tuning will probably net more power than just the intake install.
MST stands for: Must See Tommy.
I may need to borrow that g80 for ummmm research purposes.
How many miles do you think until I would need to clean them?
Good numbers...
Nice!!!! Sounds SICK 🙌
I am so confused nowadays with modern cars. Many tuning shop told me no matter what you do with intake (high flow intake), ECU will compensate input value anyways. Meaning that these type of mods will not gain any extra HP. And then you prove it with significant amount of HP gain without any mapping. I am totally confused.
I mean they are not fully wrong but....
Your video is getting good quality hope your channel grows! To million of sub!
My passenger side filter is right against the chassis, is that right? There's like no room to move anything to get space..
Is there any problem with back pressure if I just install the intake on the G80? Or do I have to do the ecu setup and re-adjust the back pressure? my G80 is equipped with an M performance exhaust. Is it okay to replace the intake without any settings?
MST Intakes are the way to go! So content with mine in my 2er 👌
Superb content and detailed as always. Thank you for your passion 👍🏻
prolly the best looking intake for the G80. I'm debating between this and the burger motorsports one now
Any idea if a carbon strut replacement in the making anywhere ?
That microphone in the engine bay though...
Do you need a tune with this setup.. will the car run lean?
🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷👏🏻👏🏻 awesome installation video Bryan.
Great video
Bell gang 🛎 🔔!!!
What do you think is better? This MST intake or the BMS intake? I want your true opinion!
I’ve had both and would go with MST. Nothing wrong with bms I just like mst better
Mst have heat shield so it’s the winner
@@G42-w3t eventuri blows both out the window lol
try closing the hood for the dyno runs bro. Otherwise, you negate heat soak, and all of the metrics about airflow on open intakes.
Using Chrome bits on an impact gun! What a brave soul😂
🇧🇷🇧🇷🇧🇷👏🏻👏🏻 I own an X3M Competition year 19/2020, it’s on stage 2 MHD E30, it’s great, putting out 757hp and 94 NM …
Did i need a tune with these intakes??
Ughhh i just cant wait till i get mine!! Just waiting for these custom front bumpers so i could replace that hideous front end😪
Will you keep the warranty with This performance upgrade?
Yup. As long as you don't change the tune
With that being said, I'd take it off before any dealership services lol
Waiting for a downpipe install with dyno number and a Jb4
Would it fit my 2024 m4 competition xdrive???
Does this mod void factory warranty?
As long as No CEL.
Will this require a tune?
did you run the dyno with the hood closed? its not really a true CAI? at $58.25 per HP, its not a great value. Even then, hood should be closed as it will draw in hot air when driving daily.
Mst intake or eventuri?? What should I get
Get them intake pipe powdered coated
Can the MST logos be removed?
Will it fit into G22/23?
How much for the kit?
Me watching this when I currently own a 07 Toyota
the stock torqued is 650 right? Why is low as 470？
470ft/lbs, thats cca 640Nm, at the wheels, damn. Americans use that measurement instead of Nm.
It’s loud with the windows down!
They are out of stock already ?! sheesh
Do these cause a CEL?
Too bad the filters weren't blue instead of red
👍🏾👍🏾👍🏾👍🏾💯💥
1st