Damn, I called IKEA because I needed to know if the circular overflow adapter were supplied with their kit, and they told me it did not. This kit is produced by Prevex(obviously) and I could only find one other place that sold the same kit where it even was shown in their pictures. Had to pay double for the same kit. I see that IKEA's solution is that you can use the same parts on the back of the overflow, and just add that circular adapter to the front if the hole in the sink is circular. As long as it works, I couldn't care less about how these things look.
@@anaesterhazy631 sieht zwar gut aus nur ist der Siphon, der Abfluss sehr unpraktisch. Bei den Rohren mit geringem Durchmesser und recht kleinem Winkel ist die Verstopfung in einem Abfluss in der Küche (z.B. Spülwasser) geradezu zwingende Folge. Das Stecksystem - naja..., zu allem IKEA-individuelle Maße. Z.B die zu ersetzende Dichtung war im Baumarkt nicht zu erhalten.
@@anaesterhazy631 die Siphonrohre sind das Problem. Ich reinigte die bereits mehrmals. Die Rohre in der Wand gehören ja nicht zum Spülbecken. Ich kann das unterscheiden, sonst würde ich IKEA nicht benennen. .
This video saved my life. Made it with this video as a woman alone to install. Ikea manual is terrible! Thanks guys, keep it up! Thumbs up👍👍👍
you're a life saver!! Thank you from the UK!!!
Thank you for this video! Just installed the same sink, water trap and tap and this was a life-saver, the Ikea instructions are absolutely terrible!
Excellent video thank you
Thanks for your video, I just realized that the installation I have in house is not correct.
Help! Do I need to use PVC "cement" for insert flexible hose upside down? I only used assembly lube and I'm afraid it will fall out in the future.
👍🏽
Damn, I called IKEA because I needed to know if the circular overflow adapter were supplied with their kit, and they told me it did not. This kit is produced by Prevex(obviously) and I could only find one other place that sold the same kit where it even was shown in their pictures. Had to pay double for the same kit.
I see that IKEA's solution is that you can use the same parts on the back of the overflow, and just add that circular adapter to the front if the hole in the sink is circular. As long as it works, I couldn't care less about how these things look.
Excuse me. Could you explain what’s wrong with the details in the last few examples ?
There is too much flexible pipe, the waste water won't drain away fully
i installed but the water goes down vey slowly🤔
Check the part at 12:48 whether that is not present in your case.
@@Sunshrine2can you please elaborate. I have the same problem. The water drains very slowly.
9:08 - wtf is the measurements on that part ?
Outer diameter 40 and 50mm.
Too complicated!
Is it for Earth or for Mars?! :(
The PVC pipe mural should bé vertical not horizontal !
Where in the video?
worse fittings ever...mines keep leaking.. the bendy pipe and last loop don't seal with anything....
I was just gonna say, maybe I'm old fashioned, but give a good old glue-together one instead of this shite
Nie wieder IKEA-Spüle!
@@anaesterhazy631 sieht zwar gut aus nur ist der Siphon, der Abfluss sehr unpraktisch. Bei den Rohren mit geringem Durchmesser und recht kleinem Winkel ist die Verstopfung in einem Abfluss in der Küche (z.B. Spülwasser) geradezu zwingende Folge. Das Stecksystem - naja..., zu allem IKEA-individuelle Maße. Z.B die zu ersetzende Dichtung war im Baumarkt nicht zu erhalten.
@@anaesterhazy631 die Siphonrohre sind das Problem. Ich reinigte die bereits mehrmals. Die Rohre in der Wand gehören ja nicht zum Spülbecken. Ich kann das unterscheiden, sonst würde ich IKEA nicht benennen. .
Просто кошмарный сифон ,,!!!!!!