Oh my God thank you so much I must’ve watched 10 videos on this I’ve done it before and I just needed a refresher and everybody’s going into detail and hold down this and hit the send button that and I don’t remember having to do all that thank you for showing the correct way to do it and saving me the time
@2:24 uhm, it seems to me like the behaviour is flipped. If the back end slides right, shouldn't the front wheels also steer right to stabilize the car? Interestingly enough, in a SPEKTRUM AVC setup video, this is the behaviour they show, the exact opposite of what you are showing here.
@@perichi101 it should sort itself out if you recalibrate ... I vaguely remember encountering the same issue but then somehow I sorted it out. Unless I am just creating random memories :)
@@ioandragulescu6063 I have vorteks 3S, its different receiver. Recalibration is done via ESC set button. But ill try today like this. I noticed that the receiver light after rebinding dims after giving it a signal from transmiter...did not find someone talk about that. Might work...fingers crossed.
I just got a felony 6s from my cousin. I’ve fought for almost 2 days trying to get it to bind. The only thing I didn’t do was have the brake rate and AVC up the whole way. Will that prevent it from binding?
I just got my new Spektrum DX3 on warranty and having issues binding. Both steering and throttle are in reversed and slow to engage with the AVC receiver. At times, the radio will not talk and the radio starts to go off with all the green lights flashing making noises. It’s hit or missed, it works and then it doesnt, got to turn it on and off often. There are times where both radio and car are on with no movements , then youll see tge wheels start yo shake after a 1 minute, then the radio works. Any help will be greatly appreciated.
Hello there question i have both a felony and infraction the felony bound up and calibrated no issues but my infraction the light on the receiver didn’t turn on and didn’t do anything else is there a chance it’s faulty
Any of you guys , after bidding and doing this calibration, ever had the car acting up by itself , like the throttle going full or cruise than stop for a brief of seconds , was scary to me, is sometimes defects on the receivers?
Hello friend, I have a radio dx3 and in my arrma infraction 6s I will have moved some settings with the bluethoot module in the app, the problem is that when I detach the avc does not turn off and the wheels no longer turn, instead when I reactivate the avc is always active and the wheels instead turn, I can not detach the avc yes and mixed with the servo, Please help me.
Done this 3 times blx3s vorteks with a dx3 the steering has no input it dims during Calibration but after I just have throttle control no steering no light on esc or rx when I sent steering signal after the calibration
You have to wait for the receiver to turn orange, sometimes it takes couple seconds then you can full throttle then reverse then right and left. Not sure if left first then right. Lol
Awww ma gawwwd, I did exactly what you said on an Armma Outcast 6. it synced, the light went solid on both tx and rx so I held the control and pulled the throttle full on. The car came off the stand ripped the table cloth off and threw every on the table onto the floor before I caught it... it took off FULL THROTTLE. !!!! Hurt my fingers and I'm lmao. What went wrong please ????
You kept the wheels on when doing a calibration you didn't know anything about, so the fault is all on you..if you would have seen or done this before, you would know this would/could happen..
I have a new ARRMA INFRACTION V2 into which I had to install a new steering servo. After I did, the steering direction was wrong so, I flipped the tab on my DX3 transmitter to reverse and fixed that. But then the AVC is all wrong: When I lift the car and turn it to the right, the AVC turns the wheels also to the right, and when I turn the car to the left, the AVC turns the wheels also to the left. Question: How do stop the AVC from working backwards and to orient the wheels properly? I was told to rebind and recalibrate, I did repeatedly, but the AVC still turns the wheels on the same direction of the body. I feel the AVC system is confused by the face that I had to reverse the steering servo, by switching the tab from N to R. Please help. Thank you.
my receiver wont recognize the neutral throttle position. it will only recognize it if I give it like 5% brake and will take that as the neutral throttle position. How do i fix this?
the average rc player in Indonesia is very difficult to buy a receiver that has the AVC feature, even though in Indonesia there are many fans of receivers with this AVC feature, please help
Why does my. Vorteks seem to turn buy its self ? Servo is working, put a new one in i now have Avc turned all the way down it makes it better. The avc seems to maje it turn and not want to drive straight can i turn avc off?
My sbr 2.0 gets immediate throttle response after going into nine mode and won't complete the process. Avc, and brake rate are turned all the way up, st and th trim set to neutral, power is 100 and th and st are set to neutral.
You have to wait for the receiver to turn orange, sometimes it takes couple seconds then you can full throttle then reverse then right and left. Not sure if left first then right. Lol
i did everything right first time..everything works…but when i turn everything off and on again i hav no avc..throttle n steering still works but no avc..help
I just bind my Dx3 but when I go to calibrate I ain’t getting any throttle. I have starting but no throttle and all the settings on the remote are right.
Kindly I have a DX5C and a DX5 Pro and I purchased five SR6100AT and three SRS6110AT receivers to use on my cars but I couldn't use the AVC with the SR6100AT because the cars starts to wobbly so I have to switch off the AVC. I also purchased a DX5 Pro and still have the same issue with the same receivers. I tried the SRS6110AT, and they work fine with both radio transmitters . Finally, I can use the AVC, but I have to change all my SR6100AT receivers at a cost, which are not cheap! Does anyone else have the same issue?
Maybe your AVC has incorrect response direction? If you pick up the vehicle & turn it to the right (simulating spin to the right) do the wheels turn left to correct the spin?
what if you do what normal people do and read the manual you people provide and not realise it was ready to run out of the box now my dx3 doesn't recognize the losi pos 2800.00 toy pos baha 2.0 and now I been at this for 5 hrs and can't get anywhere cause all your videos are if it's already set and not how to go back to factory I'm taking this pos back to the place I got it yesterday and throwing it at them if they don't refund me
I want to send you like 40 AA batteries as gratuity for the best, simple and str8 forward demonstration. Spektrum needs to link to this instead of boring blue shirt guy.
Oh my God thank you so much I must’ve watched 10 videos on this I’ve done it before and I just needed a refresher and everybody’s going into detail and hold down this and hit the send button that and I don’t remember having to do all that thank you for showing the correct way to do it and saving me the time
THANK YOU SO MUCHHHHH😊 EVEN THE rc shop was clueless thanks man
I was going through it until I come across your video , it was very helpful thanks .
@2:24 uhm, it seems to me like the behaviour is flipped. If the back end slides right, shouldn't the front wheels also steer right to stabilize the car? Interestingly enough, in a SPEKTRUM AVC setup video, this is the behaviour they show, the exact opposite of what you are showing here.
exactly. I have that avc flip problem. Anyone solved that? THX
@@perichi101 it should sort itself out if you recalibrate ... I vaguely remember encountering the same issue but then somehow I sorted it out. Unless I am just creating random memories :)
@@ioandragulescu6063 I have vorteks 3S, its different receiver. Recalibration is done via ESC set button. But ill try today like this. I noticed that the receiver light after rebinding dims after giving it a signal from transmiter...did not find someone talk about that. Might work...fingers crossed.
@@perichi101 quickly looking over the specs it seems you have the SR6200A receiver/DX3 transmitter combo, same as my losi hammer rey.
@@ioandragulescu6063 My hope for fixing this is so high now. Cant wait to get home and try. Thank you.
the AVC is backwards on this video when car goes right tires should go left not the same direction?
Thanks for the video, would it be appropriate to set endpoints right after bind and calibrate?
Yes, absolutely
Really clear instructional video thanks
nice video do i need to plug in binding jumper to program
Thank you so much helped me today :)
Can you show how to get the battery indicator on the transmitter to work?
He’s running the spektrum batteries.
I just got a felony 6s from my cousin. I’ve fought for almost 2 days trying to get it to bind. The only thing I didn’t do was have the brake rate and AVC up the whole way. Will that prevent it from binding?
I just got my new Spektrum DX3 on warranty and having issues binding. Both steering and throttle are in reversed and slow to engage with the AVC receiver. At times, the radio will not talk and the radio starts to go off with all the green lights flashing making noises. It’s hit or missed, it works and then it doesnt, got to turn it on and off often. There are times where both radio and car are on with no movements , then youll see tge wheels start yo shake after a 1 minute, then the radio works.
Any help will be greatly appreciated.
Once AVC has been disabled, can I use aux1, aux2 or aux 3 to power other servos or led lights?
Can I do this exact process to set AVC if my radio and receiver are already binded?
I would do it again once you have the TX/RX installed.
It would be nice if the android app could be updated, because i bought the bluetooth for the dashboard app. It dose'nt work.
Hello there question i have both a felony and infraction the felony bound up and calibrated no issues but my infraction the light on the receiver didn’t turn on and didn’t do anything else is there a chance it’s faulty
Avc is set incorrectly. Wheels should turn out of the slide, not into the slide.
Thats right
How to disable is the question
Yeah. He did full right first. You're supposed to do full left first then full right.
@@IISG93IIonly if the steering channel is reversed. Then yes, you calibrate the AVC right then left. Otherwise left then right.
Any of you guys , after bidding and doing this calibration, ever had the car acting up by itself , like the throttle going full or cruise than stop for a brief of seconds , was scary to me, is sometimes defects on the receivers?
Hello friend, I have a radio dx3 and in my arrma infraction 6s I will have moved some settings with the bluethoot module in the app, the problem is that when I detach the avc does not turn off and the wheels no longer turn, instead when I reactivate the avc is always active and the wheels instead turn, I can not detach the avc yes and mixed with the servo, Please help me.
Done this 3 times blx3s vorteks with a dx3 the steering has no input it dims during Calibration but after I just have throttle control no steering no light on esc or rx when I sent steering signal after the calibration
Hay, just to let you know AVC is working in REVERSE.
Does this work for vendetta 3s?
After doing the bind when I pull for full throttle my tires spin. What am I doing wrong? I have the same setup and followed it step by step.
Same for me
Oh shit. I have the dx3 but the lmt is sent with receiver sr315 wich doesn't support avc. This is why i can't calibrate avc
Correct.
What TX/RX do you have?
You have to wait for the receiver to turn orange, sometimes it takes couple seconds then you can full throttle then reverse then right and left. Not sure if left first then right. Lol
Awww ma gawwwd, I did exactly what you said on an Armma Outcast 6. it synced, the light went solid on both tx and rx so I held the control and pulled the throttle full on. The car came off the stand ripped the table cloth off and threw every on the table onto the floor before I caught it... it took off FULL THROTTLE. !!!! Hurt my fingers and I'm lmao. What went wrong please ????
You kept the wheels on when doing a calibration you didn't know anything about, so the fault is all on you..if you would have seen or done this before, you would know this would/could happen..
Some take the wheels off during programming for safety. But you may need a spacer and tighten the lug nut to keep the bearings tight together.
I have a new ARRMA INFRACTION V2 into which I had to install a new steering servo. After I did, the steering direction was wrong so, I flipped the tab on my DX3 transmitter to reverse and fixed that. But then the AVC is all wrong: When I lift the car and turn it to the right, the AVC turns the wheels also to the right, and when I turn the car to the left, the AVC turns the wheels also to the left. Question: How do stop the AVC from working backwards and to orient the wheels properly?
I was told to rebind and recalibrate, I did repeatedly, but the AVC still turns the wheels on the same direction of the body. I feel the AVC system is confused by the face that I had to reverse the steering servo, by switching the tab from N to R.
Please help. Thank you.
If you switch out the Servo. You will have to go through the set again.
I am purchasing a signal reverser!! I am having the SAME issues!!
my receiver wont recognize the neutral throttle position. it will only recognize it if I give it like 5% brake and will take that as the neutral throttle position. How do i fix this?
Throttle trim can usually fix that.
the average rc player in Indonesia is very difficult to buy a receiver that has the AVC feature, even though in Indonesia there are many fans of receivers with this AVC feature, please help
Why does my. Vorteks seem to turn buy its self ? Servo is working, put a new one in i now have Avc turned all the way down it makes it better. The avc seems to maje it turn and not want to drive straight can i turn avc off?
If you put in a new servos you will need to reset everything again. Also you can turn off AVC
My sbr 2.0 gets immediate throttle response after going into nine mode and won't complete the process. Avc, and brake rate are turned all the way up, st and th trim set to neutral, power is 100 and th and st are set to neutral.
Double check to make sure the esc is calibrated
You have to wait for the receiver to turn orange, sometimes it takes couple seconds then you can full throttle then reverse then right and left. Not sure if left first then right. Lol
Thank you so much for making this easy to follow video
How do I take it off? Helppppppo
i did everything right first time..everything works…but when i turn everything off and on again i hav no avc..throttle n steering still works but no avc..help
You have to blip the throttle first before avc is activated
If I swapped out my spektrum 6s motor/esc combo for spektrum 8s combo will this information still apply sir?
Yes it will be the same.
Thank you
My DX3 steering wheel when turned is making my losi wheel go forward instead of my trottle
Sounds like the Ch1 and Ch2 are switched.
I just bind my Dx3 but when I go to calibrate I ain’t getting any throttle. I have starting but no throttle and all the settings on the remote are right.
I'm having the same issue no trottle but trottle when I turn my steering wheel to the front
Make sure you turn it off and back on. Make sure you allow it time to get through safety checks. Also the truck needs to be flat and level.
Kindly I have a DX5C and a DX5 Pro and I purchased five SR6100AT and three SRS6110AT receivers to use on my cars but I couldn't use the AVC with the SR6100AT because the cars starts to wobbly so I have to switch off the AVC.
I also purchased a DX5 Pro and still have the same issue with the same receivers.
I tried the SRS6110AT, and they work fine with both radio transmitters . Finally, I can use the AVC, but I have to change all my SR6100AT receivers at a cost, which are not cheap!
Does anyone else have the same issue?
Maybe your AVC has incorrect response direction? If you pick up the vehicle & turn it to the right (simulating spin to the right) do the wheels turn left to correct the spin?
No it is the receivers that are defective because when changed wit another receiver model it performs well.
My remote is like forward is backwards and left is right
Turn it around 😜
Set steering to reverse
Except your AVC is operating backwards here.
yup, and funnily enough, in a spektrum AVC setup video, they show the proper behaviour. Front wheels turning same direction as the back slide.
@@ioandragulescu6063 Right, and this is from Horizon Hobbies, themselves. You'd think, that they would be more accurate...
what if you do what normal people do and read the manual you people provide and not realise it was ready to run out of the box now my dx3 doesn't recognize the losi pos 2800.00 toy pos baha 2.0 and now I been at this for 5 hrs and can't get anywhere cause all your videos are if it's already set and not how to go back to factory I'm taking this pos back to the place I got it yesterday and throwing it at them if they don't refund me
The apple app works
I want to send you like 40 AA batteries as gratuity for the best, simple and str8 forward demonstration. Spektrum needs to link to this instead of boring blue shirt guy.
Why is this video still up. The avc is reversed and you’re telling people it’s correct.
So he's running 2 s2s