If anyone wanna get code. The Arduino code is in the attached link. Thanks everyone. Learn and grow!!! drive.google.com/file/d/1So222YKR1uNN3-UvAAUhNeJTzsp9_E_u/view?usp=drivesdk
hello mr. i try your design and upload your code but the temp stays in 99 c. and when hit play button on prosteus the oven start heating then off, aand where you connect the T in oven? thank you
how can we control the temprature if the input temprature sensor is DS18b20 and final element is Peltier. how to do the programming with PID controller?
Congratulations Sir. Your presentation it's great. Could you give me the code ?
2 роки тому+1
greetings, teacher, your project is good, but why are there extra coefficients in your pid equations? as an example, 70.in the line "PID_p = 0.01*kp * PID_error;" The coefficient of 0.01 is absent in the proportional control. kp, there's gotta be a mistake. Similarly, 69.in the line "PID_error = set_temperature - T+2;" why is there a +2? there must be a reference - T when calculating the error. I'd appreciate it if you explained. Good luck with your work.
L298 also controls current that is why its used over here it was available in my lab. But you can use Mosfet as well. Mosfet will increase its efficiency!!
Could you please demonstrate this cicuit drawing, bcz it's difficult to me. I Kindly request you to demonstrate how to draw this circuit step by step. It would be a better help for people who do not have much knowledge in electrical but in the case of application, it would be very useful.
If anyone wanna get code.
The Arduino code is in the attached link.
Thanks everyone.
Learn and grow!!!
drive.google.com/file/d/1So222YKR1uNN3-UvAAUhNeJTzsp9_E_u/view?usp=drivesdk
@@josebauza638 E-mail at m.danishali96@gmail.com
I have sent email.
Kindly find attachment!
@@danishaligorsi4624 thanks
@@danishaligorsi4624
elkoudmirielmehdi@gmail.com send me pls
@@danishaligorsi4624 hello can you send the circuit in proteus please
I want to know how A0 pin is reading the current temp? in your code you haven't mentioned anything similar to your proteus diagram. plz explain
Very informative I got a lot of help from this for my project.
Thanks for your valuable feedback!
Very Informative 👍
hello mr. i try your design and upload your code but the temp stays in 99 c. and when hit play button on prosteus the oven start heating then off, aand where you connect the T in oven? thank you
I have emailed to all the mentioned e-mails in comments!
Kindly, can you send to me the code please ??
@@alijamal500ify Kindly follow link given in comments for code
how can we control the temprature if the input temprature sensor is DS18b20 and final element is Peltier. how to do the programming with PID controller?
can i know how you connect all item in proteus? i really wanna learn about that 🙃
Congratulations Sir. Your presentation it's great. Could you give me the code ?
greetings, teacher, your project is good, but why are there extra coefficients in your pid equations? as an example, 70.in the line "PID_p = 0.01*kp * PID_error;" The coefficient of 0.01 is absent in the proportional control. kp, there's gotta be a mistake. Similarly, 69.in the line "PID_error = set_temperature - T+2;" why is there a +2? there must be a reference - T when calculating the error. I'd appreciate it if you explained. Good luck with your work.
Let me have a look back into code to answer you question.
Will come to it soon..
Hopefully,
Much appreciated from your critical analysis dear!!!
L298 is a motor driver. how it is used here.....normally we use a Mosfet
L298 also controls current that is why its used over here it was available in my lab.
But you can use Mosfet as well.
Mosfet will increase its efficiency!!
Can you use pic to replace arduino?
Yes,
Why not!!
It is more robust than arduino!
@@danishaligorsi4624 can you guide me
@@thanhthinnguyen1104 You have to get PIC programming skill for that...
@@danishaligorsi4624 how to design proteus?
Like arduino ?
@@thanhthinnguyen1104 Design can be made but simulation has to compatible with MP_Lab software which is used to program Pic.
I can't try, why C _Temp value is always 0 ?
You can set the Temp according to the temperature outside any value can be set!
Yes,
I am gonna share code in comments!
So everyone can excess that!!!
Can you please share the proteus file along code
can i get this project ?
kerimt422@gmail.com
can you send this e-mail
@@kerimturan9242 kindly wait
I need this project please bauza.jose1997@gmail.com
Could you please demonstrate this cicuit drawing, bcz it's difficult to me. I Kindly request you to demonstrate how to draw this circuit step by step. It would be a better help for people who do not have much knowledge in electrical but in the case of application, it would be very useful.
I will as soon as possible!!!
Multumesc
can i have the proteus file please?
email at m.danishali96@gmail.com
Hello, sir can i get your simulation file?
Sir, I've emailed you for proteus file. Thank you very much for your concern.
Can i get a code sir?
Can i get proteus file
can you provide me protous file
Can i get the code ?
why not!
drop your email here i will send you!
@@danishaligorsi4624 please dfmoyag@utn.edu.ec
good work can you please share the proteus file?
i have emailed you for proteus file thankyou
Anyone has Proteus file ? Please upload on drive and share link
Kindly email at the given Address!
can i get the code
Yes,
Sure kindly E-mail me.
I will respond you in few days!
m.danishali96@gmail.com
@@danishaligorsi4624 Hie can i kindly get the code ,munahlovewell@gmail.com
hie can i kindly get the code ,munahlovewell@gmail.com
@@danishaligorsi4624 give me the source code pls , i already send email to you
I will send the code to all of you.
Really sorry for late reply.
I was very busy!!!
very informative video i had mailed you kindly if you can send the simulation file i would be very thankfull to you
Kindly sent email now.
@@danishaligorsi4624 sir i had mailed you half an hour ago shall i again mail or not
Recieved sir thanks alot
@@HamzaKhan-kt4zj Hi bro, can u share to me the proteus file? Its urgent
I can't hear you so can't follow what you say
You can contact on email for further information and understandings!
can you please send me the circuit
email m.danishali96@gmail.com
Please send me your scematic
kindly email at m.danishali96@gmail.com.
You can get both Arduino code and proteus file.
kindly email at m.danishali96@gmail.com.
we send it¡¡¡
Sir, i mailed you for the file sir.Please help _/\_
I have share programme with all the people who are approaching!
friend I sent you an email, check it please
have replied!
please cek email
can i have the proteus file please?
can i get the code
Kindly open given link in comments!!
Can i get the protues file please
make it by your self😂😂
can i get the code please