Це відео не доступне.
Перепрошуємо.
Attic Tent Install Video
Вставка
- Опубліковано 18 бер 2019
- Attic Tents reduce energy loss and thermal transfer in any home with a disappearing stairway to the attic.
In this video, Ray Terry shows you just how easy it is to make this small change that will make a huge difference in the comfort and energy costs of your home. #energysavings
For more tips on maintaining your house, tune in to About Your House Radio EVERY Saturday morning from 8-11am, on WFNZ 610am 102.5fm in #charlottenc or via the radio.com app.
attictent.com
aboutyourhouseradio.com
Had my roof leak repair guy at my house and he explained how I got an "air dam" from my attic that caused a leak at a window. He showed me how a ton of heat was escaping thru the attic door into the attic and causing the snow to melt and freeze. I have never heard of an attic tent and both of my houses that I lived in for 30 years had attic pull downs. I don't know why they don't make these mandatory as a building code. Great video of what I have to do and its not expensive at all. Thanx !
Great instruction video. Thanks so much. I have never heard of an attic tent before but definitely getting one. And now I know I can install myself!
Thanks!
Just what I was looking for. Cold snap heading our way.
Thank you sir.
Same here. Installed today. Took less than 10 minutes to staple. Gonna do the caulking next.
Very nice ,Ta .x
Good job on the instructions! Mine has arrived, will tackle it as soon as I find my caulking gun! Thanks!
You should ALWAYS spray foam the gap between the attic access pull down door frame and the ceiling just first. Then, use some double sided tape (preferable foam) on the host. Then install the blanket and staple it to the foam. Your attempt was ok.
Nice video.
Well,I’ll be dipped in straw.
Thanks for the video. Took me longer to watch it than it did to install it. Would you recommend using expandable foam instead of calking or not? I have both.
I installed one this morning, after the staples I taped all the edges with duct tape.
3/8 staples or1/4 ?
I used 3/8 because that's what I had. Worked well.