Ron in the shop DIY voice recordable siren driver for Lynx Touch

Поділитися
Вставка
  • Опубліковано 7 вер 2024
  • I made up a few of these record-able and amplified voice siren drivers. Here I show you how they connect and work.

КОМЕНТАРІ • 7

  • @johnnyplumb1599
    @johnnyplumb1599 2 роки тому

    Would you have any of these available now?

  • @dirtdevil7bo
    @dirtdevil7bo 5 років тому

    Do you sell these on eBay?

    • @roboalarms2467
      @roboalarms2467  5 років тому

      I will put some more on ebay. I have sold all I have in stock so I'll have to print some more up. I should have them available next week. Today is 6/22/19

    • @roboalarms2467
      @roboalarms2467  5 років тому

      today July 4th 2019 I have 3 of these for sell on Ebay. I try to keep them in stock but sell out fairly quickly, The newer model also has a closed loop that can be used with door sensors or motion sensors.

    • @dirtdevil7bo
      @dirtdevil7bo 5 років тому

      @@roboalarms2467 thank you! Will you build a model that works for a fire alarm input where when the panel pulses code 3 it will play a fire message?

    • @roboalarms2467
      @roboalarms2467  5 років тому

      @@dirtdevil7bo I have considered designing and building such a board, but it would have to be larger and require two recording chips. It might be easier and cheaper to build a small board that gives a different trigger output and then you could use any type of device for your alarm output. As an example one siren board with voice announcement and strobe light and yet another with just a burglary sound and no strobe light. The combinations would only be limited by your connections. I'll have that designed and printed in a few days.

    • @Vitamin-Q
      @Vitamin-Q 4 роки тому

      Found this today and purchased today! 10-25-19