Coil Spring Rates Explained
Вставка
- Опубліковано 25 лип 2024
- Link for measuring Sag :
• Measuring Sag (downtra...
Ironman 4x4 is the only suspension in the Philippines with a PROPER 2 inch lift 4x2 specific spring. Watch as we properly explain spring rates and what they really mean. We can never stop learning. LIVE THE LIFESTYLE!!! BE AN ENTHUSIAST, not a trader! GO GREEN! GO REAL! GO AUSSIE! GO IRONMAN 4x4!!! #spring #coilsprings #proper2inch #ironman4x4 #ironman4x4phils #ironman4x4philippines #branded #australian #certified #legal #tuv #abe #lift #2inch #allsuspension #nospacers #noshackles #60years #lifestyle #reality #novegetablesoup #enthusiast #singlebrand #nocoffeeshop #installityourself #weusewhatwesell #doyouevenuse4low #trailuporshutup
hi ! very good videos, well explained 🙏🏻👍🏼
Thanks sir
Best shop so far sa vids palang transparent
Claiming to travel to bacolod which is more near to my location mindanao for proper suspension
Thanks for informativ vids
Thanks sir.
I own a Prado 90 and it is installed with OME nitro charger and springs. Can't load really much at the back it's too soft. What springs can you recommend for me?
Hello, what would you recommend for a 2021 Crosstrek with roof rack, rooftop tent built? I’m still attempting to understand the medium or heavy load for the coilover is best.
Hi Sir Pablo,
No accessories on montero 2015 4x2 , only roof rack
Mostly city driving, occassional 7 person load on dirt road sa province and currentlt yung stock suspension sa rear mejo sag or bagsak,
Planning to get foam cell
Ok po ba yung spring B sa rear and spring A sa front, or bka nmn matagtag pag mag 2 passengers lng,
And kung both A? Bka nmn same problem din, bagsak si rear pag loaded,
Thank you in advance, good video content,
Hi sir.. Do u recommend to install a spacer?
Dmax 4x4 with steel bumper, which spring used? A or B?Standard side step
How about putting an A spring in front and B spring on the rear for isuzu mux 4x2? Is it fine? Thanks
Which springs is best for 1996 - 2000 Toyota RAV4 3s Gen..I need your advice
Can I order Ironman forged UCA for Ram 1500 2016 4x4? I wish I watched your videos earlier before I bought Bilstein 6112 for my Ram........I'm now concerned if it's better to install a proper UCA to go with it........Will need your advice. Thanks
Sir what is coil spring for dmax 2021 3.0 you recomend?
Hi, thanks for the explanation. So what would be the correct coild springs for a Suzuki Grand Vitara JT series (2014) with no bull bar, but with rockers, under protection and a roofrack. Assuming all that weights +- 50 kg... I need 2 inch lift. Thanks!
I think B springs is fine
Sir,whats the best front spring rate for my LJ78 fitted with bullbar and a winch in 32x15 set up?as of now,its a 2inch lift front and rear in stock coils and may i know if you have a stock on hand springs for this and the price so i can order it from you.im from region 10 sir.as of now sir,the front really dropped even if i added a 3inch spacers
Pwede po ba A spring sa hilux na 4x4 no load? I just installed foam cell shocks on my 2010 4x4 hilux vigo with A spring for comfort
Is there any spring for a front drive minivan payload 650kg?
What upgrade should you recommend for ranger raptor 2021. No upgraded bumpers. Just want to raise my ground clearance but keep my ride comfort. Mainly used for daily riding not for offroading.
We can go with Ironman 4x4 (S) rated springs. This will raise the front of the raptor about 1 inch, to level it off with the rear. Or go (A) springs all around and lift it 2 inches including the rear. Or A front and S rear so 2 in front and 1 rear to keep it in a level stance.
Got my Chev Colorado a quick lift (Ridemax Suspension) at nag add ako levelling kit sa front at ang stiff na ng front. Ano magandang remedyos without removing all thr specs that i added? Thanks in advance sir. More power to your channel. Marami ako natutunan..
First off you mentioned quicklift (usually a coil spacer) and ridemax shocks. What coils were used sir @kabomba
Good day sir. My navara 4x2 is fitted with iron man nitro gas sus. Plus coil springs here in cebu. The problem arise na parang may mali kasi sobrang tagtag sa hiway so i found out na B spring yung sa front and sakto yung sa likod na A spring. Sir can you give me a better advice kasi ayaw na nila mag palit. Tnx po sa sagot..
hello ironman family. im planning to upgrade my mitsubishi pajero lo be lifted for 2inch i want to know where can i find your shop location.
Pwede bang mag pa 2 inchlift ang pick up pero ang coil spring na stock pa rin ang gagamitin? Strada 2021
Hi sir pwede b ako mag lagay ng 1inch rubber spacer sa ironman coil spring. Nka nitro gas shock din ako ng ironman. It can affect b kung mag lalagay ako ng 1inch rubber coil spacer
Sir, what can you say regarding progressive coil springs? Are they better than the linear?
Technically yes. But a real progressive will have a variable wire diameter. Thinner on some part and thicker on the others, or a variable pitch or wire angle.
What category springs would be best for 5 door jimny 23 year model
@@ajayrath7630 if its unaccessorized then its B front and B rear. Thats a sure combo for the 5 door.
I have a question for you experts in the 4x4 sector! (and I would like to know if you can tell me if it is true that the ironman nitro gas shock absorbers go well with the original set-up and can be adapted with the +5? I have a Suzuki jimny 4x4 with m13a 1.3 l petrol engine with shock absorbers and standard settings, yesterday afternoon I picked up the new ironman nitro gas shock absorbers and the 4x4 spare parts dealer in Florence told me that these ironman nitro gas shock absorbers are ok for 4x4 off-road vehicles with stock trim or in a second you could put the springs higher and it becomes a +5 high trim is that true? Greetings from Florence Italy!)
Yes sir its true. 0mm to 50mm is fine for Ironman 4x4 shocks.
Magkano po sa iron man gamitin ko po Suzuki Vitara set po mgkano likod at harap po
Hello @ironman! I'm planning to install ironman FC on my 2021 Strada Athlete 4x4. Main reason for the lift is to have a better rear suspension. Stock leaf spring of the Strada seems to be flat, which makes the ride harsh. Though I have already upgraded my suspension to Tein Endura Pro.
Can you please recommend a setup which will give me a properly stanced setup for a city driven pickup.
I was thinking of using Coil A, then remove the fat bar along with the add-a-leaf. I'm not eyeing for a 2" lift on my ride. I can live with the 20mm lift in front, as long as the rear height wouldn't be too awkward.
Appreciate this video! 👏🏻
If its a 4x4 without bullbar we can run the As with a 15mm preload ring on the foam cells. At the rear we can go addaleaf and remove the fat leaf.
@@ironman4x4philippines20 thanks for replying! As long as the preload spacers won't compromise the ride quality, I think I would rather have Coil A than the 30mm lift from Coil B (w/o spacer).
Can you confirm if the ride will be better on-road with coil A+spacer than coil B?
@@joshdavid1738 yes it will be better as A is a softer spring
@@joshdavid1738 the height on the catalog is minimum based on maximum load, so if its 0-50kg, minimum lift is measured at 50kg.
@@ironman4x4philippines20 I would consider this setup 👍 I hope the As wouldn't wear much faster due to the additional 4x4 components' weight.
Thanks! 🙇🏻♂️
I got a 96' mitsubishi pajero (3 door) and want to maintain its ride height. It is my daily work horse and a weekend light off road warrior. So what kind of Ironman shocks to use and length (front & rear)? Thanks.
We have shocks specific to the Pajero sir.
Ironman power!
Thanks
Hi about sir 4x2 nissan navara with steel bumper only and light-medium load on the back every weekends. What springs can you recommend?
You can go B front and A rear if Ironman 4x4 shocks too.
Hi I am based in kenya just upgraded my Prado 150 with iron man Pro foam cell shocks all round and type b springs. But on my front left side there is a constant squeaking sound even on a flat road. Will appreciate if you can let me what the problem is
The swaybar might be touching your Pro shocks. Send me a message on FB, Pablo Lu Ascoba
Ive a Hilux 2022 4×4 which springs should I use for a medium lift and on road comfort no bullbar or load on the truck.
part no. for the coils would be toy055b + 15mm shim & add a leaf
Is the ironman add-a-leaf kit nitro gas shocks suitable for T7 ranger? my mechanic ordered from ironman4x4ph direct.. we scheduled to install this wkend 16-jan. Pls advise before it's too late :)
yes sir it will fit po. mostly on all leaf springs
Question, for 4x2 with steel bumper is it a safe to go type a or type b?
For ford ranger 4x2
Hi boss pablo, i have a nissan navara with a springs now i have upgraded my nav. with steel bumper, winch, and uvp, what spring should i use for the front? is it ok that i have C springs front and A springs on the back as i have no load on the rear? wont it be balanced when driving streets and cornerning?
Thats sort of a perfect setup sir. I always use A on the rear.
Good day sir,I have a 4by2 Nissan navara,and I do not go for off-road only in the city but all I want is good riding comport,planning to change my stock tyre to 265/65/18 bf Goodrich at gusto ko lng maalis yun kaldag pag napadaan sa lubak,Ano po suggestion nyo na proper suspension na ilagay ko,thank you sir for your response.god bless.
Same inquiry Sir, hoping for your reply.
What spring recomended for 600 to 800kilos payload. For navara 2019 4x2
Is it like a daily loading or how often is it sir?
Hi I need your help I have a ram 1500 2022 with 35-12.50-20 and bullet proof (450lb) what spring and shocks you recomend?
I would like to have stock stand
We have a full range for the Ram sir. If it is just a 450lb addition on the armor, then it will easy. Drop me a pm on FB, Pablo Lu Ascoba
sir good day can you recommend a build for strada 2021 i just want to upgrade my ride comfort no plan on offroad activities
Simple foam cell shocks with coils and addaleaf is the simpliest setup sir.
Is it a 4x2?
Would you recommend ironman 4x4 suspension and coil spring for ford ranger fx4 4x4? I use it for work and long rides only. Sometimes I have medium load. Thanks
For the Ranger, you can go with Foam Cell shocks, coilsprings, and either AddALeaf or a full leafspring. Is it a 4x2 or a 4x4? What accessories are installed in front? (Bumper, winch, etc)
@@ironman4x4philippines20 it is 4x4 sir. No accessories installed yet. Should i go with coil spring “A”?
@@seigfredbalta9554 actually you can go B springs, or A but with a bit more preload using Ironman's shocks as all our front shocks are height adjustable
My B spring is too stiff for me especially the rear. We just installed it on my 80 series with foam cell shocks. I want to try the A spring
No A springs for the rear of the LC80 sir. The 80 is a heavy car and needs the B springs to keep it stable on cornering. Too soft a spring will cause it to be prone to roll-overs. You might want to try the FEC rear shocks.
@samuel
hi all ! same for me and my pajero v95w. installed a kit (mits038bkg / gas shock absorbers) at an ironman reseller here…too stiff for me 😂
it’s like absorbers are not working/traveling and all the job is done by tyre/arms/…
@@nabilel-saheli9104 you might need A springs for the rear
@@ironman4x4philippines20 hello ! i wanted something soft (A springs for front and back) but the reseller opened the catalogue in front of me and showed me there is no A for my pajero..so i went B 🤷🏻♂️
hi sir. im currently using toughdog suspension 2inch lift same toughdog coilspring on my fortuner 2017G my problem is my rear is sag now even without passenger so what do i need to upgrade to back my rear stance ty.
Sir, is your fortuner heavily accessorized? Is it 4x4?
I want to install ironman suspension as well as 2 inch lift in my hilux sr5 and i also want my ride to be smoother I’m forseeing to install the front bullbar as well .... and with all that i also want a comfort ride .. so what should i install . Waiting for a response ....
What year is your Hilux. 2 inch lift and comfort is what Ironman 4x4 is all about.
I got 99infinity qx4 4x4 my old coil spring always hit the frame when loaded 4 cases of drinking water,what type of spring do I need?got location here in USA?.,ty
If its all stock, I think a B rear would be good.
Iron Sir what do you think of Dubinsons Coils and Nitro Dampers?
Are they worthy of considering against Ironman inventory? Respectively.
It all depends on your need sir.
Thank you sir 👍🏻👍🏻 well responded and non-biased. Everyday I get more and more interested in Ironman merchandise.
@@MyGTisxHUNTER07x thanks too sir. Just drop me a pm about your setup and lets figure out how to make it work, any brand.
@@ironman4x4philippines20 Sir Pablo, my unit is 2020 Dmax 4x4 all stock. No accesories or bullbar installed. with occasional medium loads only. can you recommend "A " springs at front? And only add a leaf at the rear in addition to stock leaf springs.
Good day sir. Do you have these Ironman 30mm lift coil springs available for a 2018 Toyota Fortuner? Part codes are TOY055A and TOY017A..
That will lift close to 50mm if its a 4x2. And yes, all in stock.
Hello sir,i use hilux,now i use ironman coil sprinng B,i have install bullbar and winch . My car now like heavy of infront.Can i use coil spring type C?
What car is it sir? What shocks are you running?
Sir, I am planning to upgrade to ridemaxx shock absorber, and planning for A spring no load, will I still get the full potential performance of the set up as well as the correct 2" lift? Will combo this set up with 265/70 R17 hybrid tires. TIA
What vehicle sir? Is it a 4x4 or 4x2? Do you have steel bumpers?
4x2 Hilux Revo no aftermarket bumpers (no load)
I have a 2 inch lifted FJ cruiser but I find the ride to be too stiff. My purpose for lifting is only for looks, no load. should I go for the A spring?
Yes sir. For the FJ i usually use the TOY055A spring, front shocks Ironman with 15mm preload spacer, and rear TOY056A spring with GRC/FEC Ironman comfort shocks
@@ironman4x4philippines20 Thankyou. Do you have any partner shops here in Cebu? Or do you plan to open here soon?
@@gurkhaman we have partner shops there or even just an installer sir.
Good day, i have a d40 navara. what spring is recommended for best comfort ride.
hi sir. 4x2 or 4x4? with accessories?
So can you get a 3” lift with the springs. And what springs would you recommend using if I install the Ironman front bummer with wench to my FJ. I also will be getting a rear steel bumper that has the tire holder and will hold a 285/70/17 tire. Thanks
We can get any height using springs. The thing is, with an independent front suspension (IFS), you need to have a 60mm sag/droop to work properly. 3 inches is a little over the limit for your vehicles components, (front axles, steering, balljoints, etc). Lift height depends on age of vehicle, plus the amount of sag/droop it can handle.
@@ironman4x4philippines20 I had the US shop in Oregon pre load the coilovers to 3 “ I installed them with their UCA also. Everything looks and drives much better then stock. They never said 3” wouldn’t work on my FJ. Maybe a diff drop will help with the control arms level?
@@cannadaincowboy if the US Oregon shop did it, then most probably they measured sag/droop to be proper. A diff drop with the drop crossmember (drop on lower arm.chassis mounts too, plus new longer spindles) will correct lower arm angles, but the new crossmember will lower the groundclearance under the diff too.
Good day sir, pwede po ba sir ang ironman "A" spring sa ridemax shock absorbers ko? Hilux 4x2 revo po ang unit ko no bullbars, no winch, etc. Pero naka 265/70r17 m/t ako na tires.
Pwede naman po. Si ridemax I think has an adjustbale spring plate also. Pm me on fb sa Pablo Lu Ascoba too sir.
Sir do you have iron man shock absorber Toyota grandia ? Then you available also hrer in Bacolod neg ocedental Philippines .
yes sir we have shocks for grandia. please visit our store goo.gl/maps/trUFB1xBeWsCqcpF6
Hi sir pablo! I have a ranger t6 4x2 with ironman commercial bull bar & rear steel bumper, siderails, steel stepboard & steel roofrack. My suspension setup is a gas bore shocks with ironman B springs, addaleafs & 2in bodylift. Ride is so stiff.. What is the best suspension setup considering ride comfortability? Should i change to foamcell shocks or use an A spring?
Are the shocks Ironman too?
@@ironman4x4philippines20 sir, existing shocks are profender gas bore
@@jaysoncastro8409 if you run B springs, I suggest trying the Nitrogas or Foam Cell shocks. Send me pics of the setup on FB sir.
Hi. Im using navara 2019 and wanted to lift my car. Currenty it only has 33s tires. Im confused which spring rate should i choose? In the future i may get a bullbar and winch. But for now its still stock. So if i choose to get the B spring, would it be rough on daily driving?
Thanks!
Hi sir! Thanks for the comment. Is it a 4x4? What shocks are you using?
@@ironman4x4philippines20 its 4x4, all coil (no leaf). Currently its all factory shocks and springs. Im gonna change to the foam cells. But i dont know about the spring rates. Will it be rough if i go with B springs without accesories for few months?
@@enrioray2615 I would go Foam Cells and B front, and A rear sir
Hi, What can you recommend for isuzu trooper 4jx1 4x4 MT 2002 model. I'm from Mindanao area. Just for a smoother ride. Thanks
We can change the shocks to Nitrogas or Foam Cell, or, if you want a bit more height, change the rear coils too and adjust or replace the torsion bars also.
Do you have a consortium shop in my area? Particularly cagayan de oro
@@ryanking1678 yes sir. We have with Carlandson Garage, si doc Carl Casiño,and naa sad sa Performance Industries kay sir Mandel. Pwede sad pm mo ko sa FB, Pablo Lu Ascoba
Great video. I have a 2021 HiluFx that i am getting Foam Cell Pros, Leaf Springs, Coils... I was wondering if i could get some advice... I am planning to get a Bullbar, but not yet. the local Ironman Dealer (great guy) here, is offering me a free "upgrade" to go from Performance Coils to Loaded Coils so I can save some money in the long run. Would it be a bad idea to drive around on Loaded Coils without a Bullbar? I am not sure when i am installing them, could be a few months down the line, or a few years (depends on budget).
Should I go with performance coils first, then when it is time for a Bullbar upgrade, get the Loaded Coils? Or should I just get Loaded Coils from the get go? Would the ride be really harsh/stiff without the bullbar?
Is that a 4x4 sir? Hilux coils are a plenty when it comes to ratings. I will guide you... Pablo
Thanks Pablo! Yes it's a 4x4. Don't really intend to go offroad much as it is still new and under warranty. Just to the beach some weekends. Bullbar would void warranty too...but the warranty lasts 3 years. Wondering if it would be too stiff or harsh to drive on loaded coils without a bullbar
@@nn.4410 we can compromise with 055B coils
@@nn.4410 that way you have excellent performance without the bullbar... and should you install a bullbar later... it would work too
@@ironman4x4philippines20 thanks a lot man I will ask the local dealer if he has those coils in stock. Is that the part number for 2021 hilux
Hi
I have Toyota LandCruiser Prado 120 3.4L V6 TZ. My main use is on highways and in city’s some times I do off-road.
I have ARB bulbar installed I want softer ride what coils you recommend
Regards
I would go with B springs front, 24710FE foam cells with 15mm preload, and A springs rear with 24682FEC comfort rear
@@ironman4x4philippines20
Do you think think FoamCell Pro will be good
And is there and different in comfort between FoamCell and FoamCell Pro
45710fe front shocks
45682fec rear shocks
Toy055b front coil spring
Toy056a rear coil spring
@@MuhammadAsifLatifyes sir. I like the characteristics of the Pro better.
@@ironman4x4philippines20 thank you for Quick response .
Have a great day
sir what is the best coil spring and shock absorber will you recommend in my 4x2 fortuner 2020 model and hm?
Do you have accessories like bumper and such?
i’m currently running tjm xgs 4000 series full suspension setup with no bull bar nor winch on my ranger wildtrak and the ride is so rough on road. i’m suspecting it’s because of the heavy duty coil spring. What ironman coil spring would you recommend to make it more comfortable both on and off road?
ps: im planning to get a bull bar soon
What vehicle is it sir?
@@ironman4x4philippines20 it’s a ford ranger wildtrak 2016
@@csotheavuth drop me a message on FB sir, Pablo Lu Ascoba
do I need a load rated coils for a 4x2 with a bullbar?
What Vehicle sir?
What is recommended for KZJ 78 LC70 series model 1995.?
On my KZJ, I run B springs front and rear and Foam Cell Shocks, Caster Correct Bushings, and Steering damper. You can also use Nitrogas shocks but I noticed a bit more left to right swaying motion with Nitrogas, so I switched to foam cell.
@@ironman4x4philippines20 How much did it cost you bro? I want one on my KZJ78. In Pakistan they’re selling it for 1100$ on road comfort and off road comfort for 1400$. Is it good?
For a fortuner 4x2 with bullbar, halogen lights, side step and with under protection what will be okay A or B springs?
What year model Fortuner sir?
@@ironman4x4philippines20 2013 model
Also with awning...
@@dominiclocsin7739 I would go with TOY055B springs, Foam Cell Struts (24710FE with the 15mm preload installed), foam cell comfort rear (24743FEC) and TOY017A springs.
@@ironman4x4philippines20 by the way my shocks are old man emu will the springs fit?
Hello sir, I installed foamcell on my hilux 4x2 with ironman 55A coil spring and I put 10mm ring spacer to lift exactly 2" based on what they told me. My question is, if I will remove the 10mm ring spacer is there a possibility to make it softer? Because honestly speaking, I am not quite satisfied with the ride on my front shocks. Still bumpy... I'll wait for your answer.
P.S. I am using 285x70x17 M/T and my only issue was my front suspension. I'm all good at the rear. TIA
Give it a week or 2 to settle down and for the shocks to cycle well (break-in) Also, most 285s are LT and rated Load E (10ply). You might want to try around 25 to 28psi if your Load Range E. Also, is this a Hilux Revo? Drop me a pm so we can discuss your setup.
Yes hilux revo 2017, and I already set my tire pressure to 27psi. Do I need to make it lower down to 25psi? Is it still safe?? It's almost a month now since it was installed.
@@jjcuenco9235 Who installed it? Lets have the sag measured to see if the setup is proper.
@@jjcuenco9235 What tires sir? What is the Load Range?
Hi sir good day.. been busy lately how can I contact you? I think there's something wrong about the sag/droop of my rig. I only have 25mm
Before measurement: 360mm
After measurement: 385mm
Good day. Im already using ironman fcp for my colorado. Im using B spring without any load. Its a little bit bumpy and stiff. Should i change to A spring? I dont plan putting any added weight to the car except for steel stepboard. Thank you. But overall the product is really good lalo na sa highway pag mabilis at pothole di masyado ramdam.
@@vincentianlaureta8714 what vehicle is it sir.
@@ironman4x4philippines20 chevrolet colorado 2018 ltz 4x4. Bali sa around 30kph below dun sya ma bumpy. Pero pag high speed mas comfortable sya compare sa stock spring. Bali 285/70r17 goodrich tire 6ply rate po gamit ko. Diko po sure kung pwede rin po sa tire galing yung stiffness
@@vincentianlaureta8714 pwede ma A sa front sir kasi pro naman. Ano ginawa sa rear leafs?
@@ironman4x4philippines20 bali add a leaf din po ni ironman po yung nasa leaf . Much better po maging result kung palitan ko ng A spring po? Yung kotse ko po kasi more onroad use. Madalang lang po sa offroad
@@ironman4x4philippines20 add a leaf po ni ironman. Pero hindi po nag bawas ng isang molye parang nilagay po sa gitna yung add a leaf.
also i forgot sir my tire size is 35x12.5 20 inches rim I have 2 inches body lift and 2 inches lift suspension with foam cell shock steel bumper front and rear is the coil spring still in category a??? navara 2018 4x2
If 4x2 with bumpers only A front and A rear may work. If 4x4 with bumpers only B front and A rear.
also i forgot sir my tire size is 35x12.5 20 inches rim I have 2 inches body lift and 2 inches lift suspension with foam cell shock steel bumper front and rear is the coil spring still in category a??? navara 2018 4x2
@@Cinnamontocacailey yes sir. The 35 tires are unsprung weight. What springs are you using now?
The shock I'm using now is ironman nitrogas but I can see that the shock has a leak so I plan to replace it with a foamcell. I've already bought an ironman 4x4 bacolod. I also plan to replace the old coil spring.
@@Cinnamontocacailey we can go B front and A rear if you want it stiffer up front
Hello sir currently my 4x4 navara has b coils in front and A on the rear will it not sag in front if i install steel bumper or do i need to change type c coils since its 4x4?
Just an ironman 4x4 type B is fine sir. We just need to add a 10 or 15mm preload in front. No need for type C. What shocks are you using?
@@ironman4x4philippines20 im using ironman foamcell sir
@@jakezamora1848 10 to 15mm ring is fine sir
how much po?, iron man 4x4 heavy load for nissan navara 4x2? the absorber is separately purchase? or as one po.
thank you
Separate purchase sir. What is the current setup so I could recommend the ideal combination.
@@ironman4x4philippines20 stock pa po lahat. can you give a quation po. salamat
hi sir I am running Oldman Emu Nitrocharger on my Pajero Sport VGT /Montero Sport without changing the stock coil spring. The ride is improve a little bit, I think the coil is too soft. I am planning to pair my EMU absober to Ironman coil Type A. Do you think it is a good idea? Oh ya, my montero sport is standard and no heavy accessories install in it.
If it is a 4x4, then you can go B in front and A at the rear.
@@ironman4x4philippines20 Yes my SUV Montero sport year 2015 is 4x4, sometimes carry full passenger but very seldom. it is 7 seater SUV
@@ironman4x4philippines20 I thought A & B coil type has different height. Isnt it the rear will become lower compare to the front if I go for B in front and A at the rear. I think B type is much higher
@@fenddyhamson6006 no sir. Height all depends on vehicle weight. A stiff spring will give you more than 2 inches of height, or be overlifted if the vehicle is light. The estimated minimum height on the catalog is based on the heaviest weight rated on the spring.
Sir do you have coil spring for 2013 Mitsubishi adventure?
It is not on the catalog sir. Drop me a pm and I might find you one that will work. I really thought adventures ran torsion bars. Fb po is Pablo Lu Ascoba
Hello i am planning to buy Springs but use my original Shock Absorbers of my Pajero 4 series 2011, can you tell me if it is a good idea and if this can happen the pros and cons Please.
Mainly it is driven on Road less offroad
@@Kalinovvv it will work but is not Ideal as there is a possibility the oem shocks will be a bit short in length, and might not fully utilize the added wheel travel.
@@Kalinovvv another possible problem is a mismatch between shock valving and spring rate. It may not match and give you a bad ride.
@@ironman4x4philippines20 i understand, well in that way i will not even consider buying the Coil springs alone without the absorbers.
What if i just put a spacer under the original spring in order just to lift the pajero little bit.
You know men we want big stuff all about the ego 😂
@@Kalinovvv what year is the pajero?
Have ironman A coils atm, do i need to change to a higher one of I installed a nudge bar/roofrack/ uvp/ front balance arms
What vehicle sir? Also is it a 4x4 or 4x2? And what are front balance arms?
@@ironman4x4philippines20 good am, trailblazer 4x4, amy UCA’s are ironman pro-forged and shocks are ironman nitrogas
@@Thereseolalia2073 is it a 4x4? You dont need balance arms
Do need to upgrade my ironman coils? Currently i have ironman A rated installed. Front balance arms, they are anti sway bars for the front🙂
Yup its a 4x4
I need a 2" lift for my Pajero LWB 3.8, which spring you recomend for offroading!
My usual setup for the 3.8 pajero is B springs front and A springs rear. This is because most rigs in the Philippines have light rear ends, no accessories in the rear, plus the Filipinos dont like a tall rear end.
You can go B front and B rear. Let me know your accessories.
@@ironman4x4philippines20 sir what springs do u recommend for a 3.2L 4m41 diesel pajero with no accessories installed po..
@@ironman4x4philippines20 mine is a 2005 model third gen pajero po pala V78W ... same lang po ba ginagamit nang CK and BK pajero?
@@TheDoucheness yup yup!
Sir How Much coil spring for 2017 NP300 Navara 4x2 (EL base unit)? Di po ako nag OFF road pero sa brgy road sa amin ( from National Highway to Home) rough road lang at hindi gaano ka maputik pag tag-ulan. Yung COIL SPRING color GREEN ba ang suitable para sa Navara ko? Pag mag order ako sa inyo how many days po darating considering sa situation? Wla na kasi stocks dito sa Cebu City... I'm from Aloguinsan, Cebu (3 hour drive to cebu city). Daghang Salamat Sir.
You can use A in front on Ironman shocks and A rear with Ironman shocks also
Hi sir. I have a 4x2 Nissan Navara using ironman 'A' spring and foamcell. Im planning to add a steel bumper. Would it be fine to use an A spring or should I change it to B spring? Thank you.
Same set up with my navara too. Waiting for the answer
You can; just adjust your shocks height i did one for my client and it works well. Just keep in mind your sag and droop of your suspension.
No lift added n front after installing ironman foam cell type A coils front and rear. 4x4 Np300 please help.
san po pwede mag order ng c spring?
sir if I go to a 2 inch lift do i need to change my stock tire?
Sir it is not a need... it is a want. :) but seriously you dont need to.
Hello sir Im planning to upgrade my conquest with the foam cell set and Uca which is ironman also. Okay lang po ba siya for comfort and time to time kakagarhan yung likod with a load almost a ton? 4x2 po siya
Yes po sir. Let me know your accessories on the vehicle as well. So we can pick the proper spring rate.
@@ironman4x4philippines20 wala pa naman sir all stock
@@SuperSoleREAPER we can run 55A front springs with 10mm/5mm spacers then rear addaleaf
Hi sir. Whats good for dmax 4x2 ? No accessories. Used once a week for 600-800kg payload.
Front A springs, rear AddALeaf...
@@ironman4x4philippines20 sir if I use the B spring on 4x4 dmax without accessories, will it stiffen the ride? I want a smoother ride than the stock. Is it recommended to use the A spring on 4x4 just for the ride?
@@POVDrivePH B is fine sir. Paired with Ironman 4x4 shocks. A would be softer. If we run A, it may sag more over time, but we can always adjust spring preload since Ironman 4x4 shocks are height adjustable.
@@ironman4x4philippines20 thank you for the informative answer
@@POVDrivePH anytime sir. Just let me know if you want to set it up. Wd can actually try both combinations.
Are the rear coils for Trailblazer 2016 same as MUX'S?
No sir. The Trailblazer runs a Different rear coil. The inside diameter on the MUX is smaller.
@Ironman 4x4 Philippines what about the furtuner/Hilux, I see in some forms people use them in the Trailblazer/Colorado 7. Thanks,
@@MyGTisxHUNTER07x front coils of the Hilux/Chevy/Isuzu are physically similar for the 2012 Hilux and 2016 Chev, but spring rates may be off. As for the rear, the inside diameters on the Fortuner, Chev, and Isuzu are not the same, as well as spring rates. It might be best to use vehicle specific springs to avoid any mistakes, as without a spring dyno, we cant know the spring rate.
@Ironman 4x4 Philippines Highly appreciated and superb response, Iron Sir!!
@@MyGTisxHUNTER07x thanks sir! Let me know how we can help.
Hi just like to ask ano po ang fitted na coilspring iron man for gen 2 pajero
Yes complete coils, shocks, torsion...
@@ironman4x4philippines20 hi sir how about sa ironman shocks sir what do you recomment for pajero 1995 gen 2, ano po pwede nitrogas or foamcell?
@@jeraldbasiliotv7641 usual install is nitrogas sir
Navara D40 Petrol. On the catelogue I can't find Niss040A spring. Is it not suitable?
I will check for you. Do you have a 4x4 and do you run a bullbar?
@@ironman4x4philippines20 its 4x4 and no bull bar or winch
@@ironman4x4philippines20 Hi sir any updates?
@@ironman4x4philippines20 Hi Sir, I am waiting for you reply to make order. Mine is Stock 4x4 V6 petrol with no bull bar/accessories
@@mvshabeer what year model sir?
Hi sir, congratulations your videos are very informative. I want your suggestion on my 2014 fortuner 3.0 4x4. It has a hard and stiff ride. I installed a after market Belstien shocks on original my springs to make it’s ride smoother. It improved a little bit but I’m still looking for a smoother ride. I plan to change my original springs with Ironman with “A” spring rate. Am I doing the right thing? Would appreciate so much your thoughts on this. Thank you.
A lot of people combine bilstein with Ironman springs and they say it works well. You will get a 2 inch lift as well. We also have 1 inch lift springs. Drop me an email at ironman4x4phils@yahoo.com
@@ironman4x4philippines20 Sir, what is the product code of the coil spring to achieve 1" lift using bilstein 5100?
My vehicle is Hilux Conquest 2019 4x2. Thank you.
@@jandivinagracia3659 either TOY055A or TOY038B which is slightly lower
@@ironman4x4philippines20 When I use TOY055A in 5100, will it overlift? I just want a level stance.
Hoping to achieve comfort ride by replacing the coils instead of compressing it. Currently set my 5100 at 3rd notch.
@@jandivinagracia3659 you could use 55A and play with your preload settings, use 1, or 2 notch, to get the height you want.
Noob question lng po pwede po ba yan coil spring A sa stock shock lng tapos add a leaf or palit shock absorber po tlga? Ranger 4x2
Pwede sa harap pero medyo kapus sya kunti po. Sa likod definitely hindi aabot ang stock shocks sir
@@ironman4x4philippines20 noted po sir mag upgrade nlng tlga ako sa shock absorber ano pong recommend nyo na ironman 4x4 shock na mas mura pang 2 inch 🙂
@@thenavigatr5964 nitrogas sir. Halos lahat na shocks sa market is nitrogas
Sir 4x2 ranger sa akin, meron bang ironman spring na 20mm lift lng? Kunting lift lang talaga habol ko and comfort ride. Thanks
Meron sir. Easier if you go foam cell pro because we can lower the front shocks. Most height adjustable shocks start at stock spring seat height and we can go up. The foam cell pro allows you either to adjust up or down.
Thank you for the info. Saan kayo makuntak? FB or any number?
@@lloydparba5617 FB sir, Pablo Lu Ascoba or Ironman4x4Philippines
@@ironman4x4philippines20 wala man ma reply sa fb page. Anyway, meron kayo distributor sa davao city? Thanks
Good day sir. I have 2018 fortuner. Just bought a ironman nitro gas shocks. Anu po pwede ko magamit na coil spring na atleast stock height to further improve the ride and eliminate the body roll. Do you have an ironman coil na stock height? Thank you.
Yes we do have springs sir. Is it a 4x2 or 4x4?
4x2 sir. Not used for offroad purposes. Just city driving. Grabe kasi ang body roll and tagtag ng stock na suspension. So i bought the nitrogas shocks. But kulang parin sir. What can you recommend sa unit ko sir?
@@mikabdullah4350 TOY038B front springs and TOY017S rear. That is stock height, about 1 inch maximum height
@@ironman4x4philippines20 ironman spring parin yun sir? Where can i buy that sir?
@@mikabdullah4350 yes it is Ironman 4x4. Send me a message on our FB page Ironman4x4Philippines, or me personally Pablo Lu Ascoba.
Good day sir, pag nag palit ako ng D spring madagdagan din ba ang payload ng sskyan? Np300 VL MT..
Yes pwede, but using D on a light vehicle will lead to no sag/droop and the result is a very harsh ride.
Just use airbag man so you can just inflate it when needed for heavier payload and deflate for a comfortable ride.
@@jebbdomingo9173 sir, okay ba ang airbag. Gaano katagal bgo masira ang airbag?
San location sir ng showroom n yan???
Thats the Ironman 4x4 Superstore and HQ for the country. It is in Bacolod City.
Hello sir, very good explanation but front differential and CV joints are unsprung weight and hence should not matter on front weight between 2WD and 4WD. So both should have similar front spring requirement. Cheers
They are sprung weights on IFS suspension sir. Independent suspension like in the example of the video carry all thos components on the chassis side and are sprung weights. It is unsprung if your vehicle is a solid axle front.
On IFS suspension, the front differential is bolted to the chassis, so is the transfer case, front propeller shaft, and the 2 CV joints. This plus the braces and supports that hold them in place is about a 100kg difference is SPRUNG weight more or less. All carried by the springs.
If you look at a brand new 2022 Hilux E 4x2, you will see the front coils have a green/red paint code and a different part number over the 2022 Hilux 4x4, which runs a blue/green code and different partnumber.
Your theory is correct for Solid Axle 4x4s where only the transfer case and prop shaft is sprung, but the front diff (CV axles inside the diff housing) are all unsprung.
Do you have for ssangyong rexton?
Yes we do sir
@@ironman4x4philippines20 Nag pm po ako sa msgr sir. thank you.
Do you have a springs for 2020 Ranger Raptor 2.0 Ecoblue ?
Yes we do sir
@@ironman4x4philippines20 Where can i buy it , i have a stell bıll bar and winch in the front , steel bar , camp tent , tool box and air tube in back , i need 100 kg for front and 200 kg raised for back i think
@@muratcemtunali1109 where are you sir?
@@ironman4x4philippines20 Istanbul , Turkey
@@muratcemtunali1109 I will try to find you an Ironman 4x4 dealer in Istanbul
😢 kinupal ako ng shop na kausap ko. wala lang pala silang IRONMAN na brand. next ko na Upgrade yan na kukunin ko IronMan 4x4
Thanks thanks sir.
Sir are you based in Bacolod? If yes po gusto ko sana malaman ang address ng store po ninyo. Thank you po.
Yes sir I am in Bacolod...
Ironman 4x4 Superstore
(034) 454 5137
maps.app.goo.gl/FyDV55KFQc5Hy12GA
Sir jeep jk hard bump on small road lobak pero ok naman sa ride ano po problema short po ba ang spring or long shocks? Pls help
Whats your setup sir?
Fox 2.0 teraflex spring order lang po sir tapos pina install gusto ko na sana palitan nalang ng iron man kaya lang wala pa 1 yr sayang po ok po green iron man sa lc200 ko just replace it 2 weeks ago
@@alexanderdagohoy3041 you might be buttoming out sir. Thats either your springs are too soft, or shocks are too long.
@@ironman4x4philippines20 sir ano po remedy duda ako my shocks is too long kasi ok naman sya sa ride pero sudden bump nako po parang mag deploy ang iarbags
@@alexanderdagohoy3041 pwede naman na too long sya na nauubos yung shocks bago maubos yung suspension travel. That leads to a bone jarring impact. Try to take pictures of your suspension, and send them to me. Let us see how we can fix it kahit hindi pa ironman yan.
Sir hood afternoon, san po located un store nyo?
🔸Ironman 4x4 QC office 🔸
118 Speaker Perez, Santa Mesa Heights, Quezon City , Metro Manila
maps.app.goo.gl/nf4N7zNwKNXMX2Hd6
+63 2 8517 5131
09774658702
09236921869
🔸Ironman 4x4 Superstore🔸
Bacolod, 6100 Negros Occidental, Philippines
+639164764017
(034) 454-5137
Google map:
maps.app.goo.gl/Zrbie6aS1Hw8mrj66
We also have dealers nationwide
Salamat s reply sir.
Magkano sir for 4x2 tnx...
What vehicle sir?
"vvvmmmeepep"
"boiioiiioioiiong"
Sir sa 4x2 pwede din ba si B spring?
What vehicle sir? What setup?
@@ironman4x4philippines20 hilux conquest 4x2 sir no bumper
@@marco-mp2qe pwede 55B which is softer a bit than 65A... its a bit complicated for the Hilux as there are 6 different springs
@@ironman4x4philippines20 noted sir, will be getting mine installed this week hehehe
@@marco-mp2qe pm me sir on fb... Pablo Lu Ascoba if you need help
sir anong pwedeng coil spring for hilux 4x2 for comfort ride
4x2 Hilux high ride or the low ride. Also what is installed in front(bullbar, winch, etc), and what shocks are used?
My spring doesn't even have stamp on it
They usually do. Where are you from?
Cali
@@4bvenom733 review the sales invoice sir, or the box. It should be there. What vehicle is this?
@@4bvenom733 drop me a message on FB, Pablo Lu Ascoba. I will help you sort it out.
I don't remember looking at the box but ill look again and hope i still have the box
Sir me I know your location