Great device. I became interested in this product when my neighbor installed one in his Ford F250 with a diesel engine. He bragged to me about better fuel mileage and power that he could not believe. Now, I am interested in this product to fit my application. Will this device work on my 05 Monaco diesel pusher with a 8.3L Cummings with a 6 speed allison? The coach weights in at 32,300lbs empty and is 40 ft in lenght.
would really have sucked if any shaving or file from drilling the hole in the exhaust manifold when into the turbo. You can never be to careful with turbos
+noisyboy507 The insight monitor does not do any performance tuning, it is for monitoring purposes only and works on both gas and diesel vehicles that are 1996 or newer which have an OBD-II port.
+Dave Kana Yes, it will. Keep in mind that what is being shown in the video is a monitor only and does not do any tuning. Edge does a Juice With Attitude CTS that will do tuning and use a very similar monitor.
Thanks for your comment, still deciding if I want gauges or a monitor. Cost is about the same for a 3 gauge set up, EGT, Boost, Trans Temp, or Fuel Pressure, Thanks, Dave.
One of the best instructional video's I've ever seen.
Great device. I became interested in this product when my neighbor installed one in his Ford F250 with a diesel engine. He bragged to me about better fuel mileage and power that he could not believe.
Now, I am interested in this product to fit my application. Will this device work on my 05 Monaco diesel pusher with a 8.3L Cummings with a 6 speed allison? The coach weights in at 32,300lbs empty and is 40 ft in lenght.
Is an additional probe needed to make the boost gauge work or will it work off the obd2??
On most vehicles it will read from the OBD-II port. It does vary from vehicle to vehicle though.
I have an 05 cummins 5.9 g56 no programmer yet. Will it show boost with the system from the obd2?
Yes it will.
would really have sucked if any shaving or file from drilling the hole in the exhaust manifold when into the turbo. You can never be to careful with turbos
this is just for diesel engines or works too in gas engines?
+noisyboy507 The insight monitor does not do any performance tuning, it is for monitoring purposes only and works on both gas and diesel vehicles that are 1996 or newer which have an OBD-II port.
Will this work just as well on a 2000 24V VP44?
+Dave Kana Yes, it will. Keep in mind that what is being shown in the video is a monitor only and does not do any tuning. Edge does a Juice With Attitude CTS that will do tuning and use a very similar monitor.
Thanks for your comment, still deciding if I want gauges or a monitor. Cost is about the same for a 3 gauge set up, EGT, Boost, Trans Temp, or Fuel Pressure, Thanks, Dave.
How long would this typically take to install?
Depending on experience, it's roughly a 45 minute install including the install of the pyrometer.