Great video your obviously very knowledgeable with electronics , but why do you use a crappy iron ? your joints would be much better with a higher wattage than the 8w your using ✌✌
Why on earth are you skating a drill bit around the PCB to remove the resist? A sharp knife, preferably with a curved edge, provides much finer control.
I tried doing the same thing a while back, the problem was that if its connected with only VBUS and Ground the default power will be 5V at 1Amp thats 5 watts nothing more. if the unit needs 2amps at 5volts it will take a while to charge it compared to charging it with micro usb.
Sorry mate, but I won't allow ads from Ad.Fly to follow your links. Excellent tutorial, but I've banished advertising from my entire network. Still gave ya a thumbs up. :)
@@MrSatech Thanks. :) I simply got sick of pervasive and intrusive ads taking up half my screen and bandwidth (not to mention those "forced" pre and mid-roll ads) for video ads downloading at high resolution in the background "just in case" I clicked one. So, I banished them all from everything I could. The only thing I haven't been successful in banishing ads from so far is Twitch, so... I banished Twitch.
I've had this idea for years wondering if he can be switched or changed out because if you could I'd love to see like older phones like a Galaxy S7 edge or aki Galaxy note 5 I'd love to see it be switched around to USB C that would be cool thank you for this great video you're awesome man
I actually thought to try that with my s7 a few days ago. That's why I'm watching this video rn. Idk what to expect but i believe that it will just change the input type and that it will work as usual.
You should show how to do this on an Xbox one controller! A lot of people don't like the look of the new Xbox controller but want c type charging ports.
Yes I can do that But it can only charge, and it's really hard to connect data connections, it can only be used for charging. I plan to make a video in the future on the PlayStation 4 handle on the Xbox handle.👍
Jesus christ this is no doubt one of the roughest SMT jobs I've seen in my life. Makes you average amateur Indian SMT tutorial look like a surgery job xD
@@MrSatech You should at least look up. Without CC pin resistor, USB C supply will not give any power to the cable. If you still can't understand the problem, then it is your limitation, I guess.
Мне пришла идея проделать этот номер с налобным фонариком. Я не микроэлектроншик и на третий хотел бросить эту затею но благодаря автору этого ролика всё получилось просто отлично. Респект таким нерукожопам👍👍👍
if you did, did it turn out? also I'm pretty sure the pins arent in the same order. what I mean is the USB A to USB C cord doesn't transfer same as micro to USB A.
@@weltsiebenhundert if you can do the hardware upgrade it will work, the new chargers have backwards compatibility standards and if there are only pins for USB 2.0 it will detect and only give voltage for 5v devices
@@MrSatechdifficult but not impossible correct? what will be the challenges? data tracing to the new usb type c connector? that will be a killer video though!
can you do a video that convert old smartphone that uses Micro connector to Type-C connector port？I'm thinking if I can make my old Sony phone to type-c port
@@KingLouisII I would pay someone to convert my ps4 controller to usb type c. Micro usb is the absolute worst. I have 10 broken cords none of the last more than a year mean while I've been using the same type c on my phone for over 2 years.
I have the Kicker Tabor 2 headphones, they have the micro usb connection. I wish there’s was a tear down of them so I could see if a USB C port would match the solder points.
I would love to do this to a few devices I have, but don’t want to try it myself. Any idea what a repair shop would charge to do this? What would be a fair price? Thanks 🙏
Hello.If you're confident, you can do it, but the PCB setup should be thoroughly investigated. The inputs of the electricity must be determined. It's for charging ok, but the data transmission business is a bit of a mess.
@@MrSatech That's why you can't use a cable with USB-C on both ends. The current sink (power bank) does not tell the current source (USB charger) to make power available. This is done by two 5k1 pull-down resistors on the power bank side, connected to pins CC1 and CC2. This is an important feature of USB-C. Omitting it results in it only working with cables with USB-A on one end and USB-C on the other. But we all know that double-sided USB-C/USB-C cables are the future.
Great video. But I've got one question. At 4:10 right after you solder the usb c adapter to the board the camera jumps and suddenly there's a small bit of red wire your soldering on that wasn't there before. What's it for? Im researching how to do this swap so I may possibly to it to both of my daughters Galaxy Tab A tablets. The Micro USB plugs are just not strong enough to handle the riggors imposed by small children. USB c, however, I feel would hold up alot better. I know there will be a difference between the boards on the tablets and the one you were working with but Id think they'd be somewhat similar. No? Anyway. If you could help me out with that bit of red wire I'd much appreciate it. Thx for the video!!! 👍🏻👍🏻👍🏻👍🏻 *edit* The link you posted to buy the usb c doesn't seem to work for me 😕
The minus tip is already connected to the motherboard. In other words, when the body is connected to the main board, it is connected to the negative terminal. However, this is not always the case. This was the case with the motherboards I used.
@@MrSatech nice! Now I have to ask does this type c 6 pin port come with the resistors built in or something? To my understanding of type c used strictly for charging needs somewhere around a 52kohm resistor for CC communication to the charging cable you plug into it. Or is this somehow bypassed in your setup? Would help alot as I'm trying to get a type c working in a ps vita.
Hey do you think this would work for a Logitech g pro wireless mouse so it can charge usb c? I dont see why not if it worked with these devices. Great video just wish you talked and broke it down.
Would this be possible with other devices or different for each one? I want to swap out some of my controllers, I paid good money for my old gen. Controllers that work but c works so much better.
Is something like this possible for a PS3 and PS4 controller to upgrade it to usb type C? If so I think that video would get a lot of views, Just saying :)
То что я искал, только как я думаю что сам наврятле повторю. Как я уже узнал что все гнёзда type-C отличаются. Очень хотелось бы узнать какое именно у вас , хотел бы также заменить только на телефоне 👍
I can't show a lot because each product has different connection types, which can have dangerous consequences, I just tried to show the connection of the plus and minus in a simple way and the case of easy charging
Eu tenho um pc da china tipo um surface que a entrada micro usb dele é muito ruim, uso somente para carga mas é devagar, será que é possível trocar? E esse mesmo pc tem uma porta usb 3.0 que funciona somente dispositivos 2.0, será possível trocar também pra uma porta usb 2.0?
@@MrSatech dude you make a video but don’t want to share any information nor respond to comments of important details on this swap! Кем ты себя возомнил(а)? explain the procedure in your own language if it’s difficult to write in other language!
If you look carefully at this video and don't understand anything. I don't think you should ever bother with these things. 'Cause you can mess up the device you want to change in your hand
@@MrSatech Thank you! if i mess up this decision i will make on my own! hey but at least i’ll learn in the process! if say very little to explain then most likely a lot of people will mess up! that’s the whole purpose in the first place to make videos for other viewers to learn! not give them halfway information unless you just trolling! any how have a nice day.
I’m absolutley not recommending doing this with expensive things. Considered you can fataly damage them. I also don’t recommending doing htis with cheap stuff. Cuz you coud’ve sell the old device for like half the original price. Instead of risking breaking iť. And then buy a new one.
Omg the moment he drilled the pcb i was like "WTF!? wait thats brilliant xD"
😷👍
yea but never do that to a complex pcb like motherboard even if you dont see paths there most defiantly can be some cuz they go in layers
@@cudiedgar the same i think
WTB -> wait that's brilliant
@@MrSatech what happens if you try this with iPhone also is possible to soder lighting port on android
Great video
I hope if you can make a video on how to identify the + and - for beginners on different pcbs
I had the same idea few months ago , microusb have a crap design, excelent video :P
Actually micro usb is a curse in innovation from decades!😒😒
They bend so easily on ps4 controllers lmao
Ya they bend so easily while using the mobile on cahrge
@@Shastry0700 yeah all my old phones that had this couldn't be recharged now coz the microusb got broken quickly
Because when upgrading fine microelectronics treat it as such. It's not a sledge hammer. Don't be morons!😨
The part i am confused is on which connector of USB Type C is the positive (Red) cable connected?
Great video your obviously very knowledgeable with electronics , but why do you use a crappy iron ? your joints would be much better with a higher wattage than the 8w your using ✌✌
Hey can you list all the tools you used? I'm planning to do this to some of my electronics
Why on earth are you skating a drill bit around the PCB to remove the resist? A sharp knife, preferably with a curved edge, provides much finer control.
in order to secure the product in place, it was necessary to pierce the part.You need to be very careful.
Invalid criticism
Came for the replacement, stayed for the song.
You've inspired me.
👍👍
Can u make a video about the pins of micro b and c type
I tried doing the same thing a while back, the problem was that if its connected with only VBUS and Ground the default power will be 5V at 1Amp thats 5 watts nothing more. if the unit needs 2amps at 5volts it will take a while to charge it compared to charging it with micro usb.
You probably omitted pull-down resistors on CC pins of the USB-C connector.
right, this will only charge via an USB-A to USB-C cable
I would kike to do this on my Sony headset getting a 2.0 cable will become complicated in the next few years
Sorry mate, but I won't allow ads from Ad.Fly to follow your links. Excellent tutorial, but I've banished advertising from my entire network. Still gave ya a thumbs up. :)
a.aliexpress.com/_EJ9pAHD
a.aliexpress.com/_EznNNMx
@@MrSatech Thanks. :) I simply got sick of pervasive and intrusive ads taking up half my screen and bandwidth (not to mention those "forced" pre and mid-roll ads) for video ads downloading at high resolution in the background "just in case" I clicked one. So, I banished them all from everything I could. The only thing I haven't been successful in banishing ads from so far is Twitch, so... I banished Twitch.
I've had this idea for years wondering if he can be switched or changed out because if you could I'd love to see like older phones like a Galaxy S7 edge or aki Galaxy note 5 I'd love to see it be switched around to USB C that would be cool thank you for this great video you're awesome man
Damn me too
I actually thought to try that with my s7 a few days ago. That's why I'm watching this video rn. Idk what to expect but i believe that it will just change the input type and that it will work as usual.
@@zdravko_ns At this point, anything would be better than having those dumb micro-usb cables break if you fart near them.
@@SweetTodd so true
You should show how to do this on an Xbox one controller! A lot of people don't like the look of the new Xbox controller but want c type charging ports.
Yes I can do that But it can only charge, and it's really hard to connect data connections, it can only be used for charging. I plan to make a video in the future on the PlayStation 4 handle on the Xbox handle.👍
make the video but keep the micro usb for data and add a type c for charging! that will be cool if it works
Jesus christ this is no doubt one of the roughest SMT jobs I've seen in my life. Makes you average amateur Indian SMT tutorial look like a surgery job xD
Can you make a video on full tutorial of converting micro usb to type c? Please..
This is not going to work with USB C power supply. You don't have a resistor for cc pin.
It works very well
@@MrSatech You should at least look up. Without CC pin resistor, USB C supply will not give any power to the cable. If you still can't understand the problem, then it is your limitation, I guess.
Kya mobile me bhi micro usb port ko type c me change kar sakte h ya nhi
Please answer
I wouldn't recommend it for the phone, it's too risky
@@MrSatech thanks
Using an adapter doesn’t accomplish the same thing?
You have to always carry the adapter. This is a permanent solution.
Мне пришла идея проделать этот номер с налобным фонариком. Я не микроэлектроншик и на третий хотел бросить эту затею но благодаря автору этого ролика всё получилось просто отлично. Респект таким нерукожопам👍👍👍
I'm looking forward to do this on an old phone
I'm thinking to do it as well
@@marlonarce8762 me too!
if you did, did it turn out? also I'm pretty sure the pins arent in the same order. what I mean is the USB A to USB C cord doesn't transfer same as micro to USB A.
Can you make a video to converter the smartphone from micro sd to type C because i confused to make it please 😁😁😁
This is very difficult on new phones, but I'll share a video if I'm on it
@@MrSatech yes, difficult and risky to damage.
Actually i did it on a old smartphone
Guess what?
The battery blew up🤦🏻♂️
That was called intex something (I don't know the model)
I wonder if its possible to do this to a Sony walkman mp3 player 🤔 would be so much more convenient to have it be usb type c lol
Sorry. I can't see how you made sure the proper pin connect for the usb c after removing the usb micro. And where do I get to parts.
a.aliexpress.com/_BUOC24
@@MrSatech Is this also the same to Bluetooth headphones?
Micro USB charging to Typ c charging?
@@weltsiebenhundert if you can do the hardware upgrade it will work, the new chargers have backwards compatibility standards and if there are only pins for USB 2.0 it will detect and only give voltage for 5v devices
Does this work for smartphones
It may be, but it's a difficult workmanship
@@MrSatechdifficult but not impossible correct? what will be the challenges? data tracing to the new usb type c connector? that will be a killer video though!
It is not difficult, the data cable should be connected to the appropriate place, but be careful. thank you
Why and how is it working in reverse? It has to be able to invert the plus and minus pins somehow 🤔
Yes. Is working reverse not problem.
It is not reverting polarity, the USB-C connector it's reversible because it's a mirrored connector (both sides are identical, but flipped)
Nice video. which pin on the usb-c is the red wire soldered to? Is it CC1?
Every electric giant is different. You need to find it yourself, + electricity Red cable
I think it is VBUS. He omitted the CC pins.
can you do a video that convert old smartphone that uses Micro connector to Type-C connector port？I'm thinking if I can make my old Sony phone to type-c port
In the video and preview: QCY (Xiaomi) T1C
This is an example. You can develop it as you like. thank you for commenting on the video. I wish you a good day.
i want such replacement because my children so many time they have broken my usb jack
what item did you use to soften the usb aand that glue thingy
flux solder
can you do sample of a micro usb phone changed into USB type c thanks
It's a lot of hard work. I don't do that,
I'm guessing for a connector with data it's not this easy
Aren’t they different voltages the two?
No, the voltages are not different ,it's not fast charging
Can you make a video doing the same on a ps3 DualShock 3?
I don't have that product. But normally I can input type c. It is necessary to try.
Ha! That's a project I'm researching right now. I'm also going to see if it's possible for the PS4 controller.
Same I wanna learn to do this on my DualShock 3 to USB-C 2.0 so there is less cables in my room. 🤓
@@KingLouisII I would pay someone to convert my ps4 controller to usb type c. Micro usb is the absolute worst. I have 10 broken cords none of the last more than a year mean while I've been using the same type c on my phone for over 2 years.
Hello mere phone me BH I daal sakte ho Kya pls ? Or kitne me?
I have the Kicker Tabor 2 headphones, they have the micro usb connection. I wish there’s was a tear down of them so I could see if a USB C port would match the solder points.
I would love to do this to a few devices I have, but don’t want to try it myself.
Any idea what a repair shop would charge to do this? What would be a fair price? Thanks 🙏
I don't know if anyone else has done this but Me.
Can you do this to a firestick? cause I hate the mini usb.
Hello.If you're confident, you can do it, but the PCB setup should be thoroughly investigated. The inputs of the electricity must be determined. It's for charging ok, but the data transmission business is a bit of a mess.
@@MrSatech oh i see well thanks for the reply!
I have a Huawei Y6P, can I do the same process? It's hard to find a micro USB cable these days!
Aren't you supposed to connect 5.1K resistors between CC lines and GND to mark the device as "upstream facing port" according to USB-C specification?
I didn't tie anything up.
@@MrSatech That's why you can't use a cable with USB-C on both ends. The current sink (power bank) does not tell the current source (USB charger) to make power available. This is done by two 5k1 pull-down resistors on the power bank side, connected to pins CC1 and CC2.
This is an important feature of USB-C. Omitting it results in it only working with cables with USB-A on one end and USB-C on the other.
But we all know that double-sided USB-C/USB-C cables are the future.
@@SirWolfCZ where to get easy to understand usb c spec sheet?
Hey brother can you give draw and full toturial video
Is it worth it may as well just use a convertor adapter
Of course, an adapter USB Type-C will do the job. But this is a matter of taste, I like dealing with these things.
Can u do same thing with mobile phones
May be. But it can not be applied on each phone. It may be on old phones.😷
I know it's hard because one mistake can break the pcb but nice replacing video
Thank you. When I find time from work, I'll upload videos like this.
Can i do this in a smartphone(kya mai ek smart phone mai yeh kar sakte hai)
Great video. But I've got one question. At 4:10 right after you solder the usb c adapter to the board the camera jumps and suddenly there's a small bit of red wire your soldering on that wasn't there before. What's it for? Im researching how to do this swap so I may possibly to it to both of my daughters Galaxy Tab A tablets. The Micro USB plugs are just not strong enough to handle the riggors imposed by small children. USB c, however, I feel would hold up alot better. I know there will be a difference between the boards on the tablets and the one you were working with but Id think they'd be somewhat similar. No? Anyway. If you could help me out with that bit of red wire I'd much appreciate it. Thx for the video!!! 👍🏻👍🏻👍🏻👍🏻
*edit*
The link you posted to buy the usb c doesn't seem to work for me 😕
Red wire. Positive connecting leg.You need to find him on the card
can i convert this to my headphones
i want to convert the usb a ports from a raspberry pi 4 into usb-c can someone tell me which usb c port i need and if its possible
So can i convert my asus zenfone max pro m2 device from micro usb connector port to type C ? Is it possible??
It's too risky.
But you didnt connect the negative point to the USB c.
The minus tip is already connected to the motherboard.
In other words, when the body is connected to the main board, it is connected to the negative terminal. However, this is not always the case. This was the case with the motherboards I used.
@@MrSatech ohkk... got it.. can u change the micro usb of airdots to USB C if possible?
Real Airport or fake ones ? Fake Airpods is possible.
@@MrSatech not airpods... MI AIRDOTS
Yes possible
Drill? Schematics of pinouts? Where did you put the jumper at?
Just out of curiosity, how has this held up to this day? Is your device still charging without issue?
Without issue. No problem
@@MrSatech nice! Now I have to ask does this type c 6 pin port come with the resistors built in or something? To my understanding of type c used strictly for charging needs somewhere around a 52kohm resistor for CC communication to the charging cable you plug into it. Or is this somehow bypassed in your setup? Would help alot as I'm trying to get a type c working in a ps vita.
Does this work for head phones as well
Depending on your ability, it may be
Hey do you think this would work for a Logitech g pro wireless mouse so it can charge usb c? I dont see why not if it worked with these devices. Great video just wish you talked and broke it down.
Suitable for Logitech G Pro. I think it's going to be really good. I think it can be done. If you can,
Did u just drill the mainboard??
WTF
Hello can you include some diagrams how you connected the wires?
It's very simple. Watch carefully. You'll see
Would this be possible with other devices or different for each one? I want to swap out some of my controllers, I paid good money for my old gen. Controllers that work but c works so much better.
wait do i really need to drill? because that's one of my problem
1st maybe my phone will be damaged
2nd i don't have a drill
I didn't try it on the phone. Drilling ensures that the product is robust
@@MrSatech okay thanks
@@MrSatech btw can i possibly convet my phone from micro usb to type c?
It's really hard to say because it's really hard to find a place on the phone. Because that USB place on the phone is too tight.
@@MrSatech okay. thanks again :)
This was his last video on youtube RIP BRO :(
Comment ?
Is something like this possible for a PS3 and PS4 controller to upgrade it to usb type C? If so I think that video would get a lot of views, Just saying :)
I showed a technique here. We can charge the PS3 controller, but it could be a data transfer problem.
@@MrSatech right so it would have to be a controller already built with Type C in mind that works for both
Is it possible to change the ports in Smartphone
Very good, replacement m.port to c port
Is it possible to work with PD devices?
Pd ?
Power Delivery from Qualcomm Quick Charge 4.0 or 5.0
Can this be done to a ps4 controller!?
Yes
thats what im trying to do
@@hernanaguilarjr7954 any luck
I got it done by nagashock gaming to my ps4 controller and it works perfectly fine
@@reinaldoalvarenga2890 how much did they charge you?
so it is only for power? no data?
but I think data information transmission will be successful, but it's necessary to work, research needs to be investigated, maybe you can do it.
Magakano po pa convert?
То что я искал, только как я думаю что сам наврятле повторю. Как я уже узнал что все гнёзда type-C отличаются. Очень хотелось бы узнать какое именно у вас , хотел бы также заменить только на телефоне 👍
Их 2 вида.1 ый 4х пиновый,там два плюса и два минуса.2 ой 24х пиновый,в нем юсб2, юсб3,согласование,питание и доп.канал
Достаточно одного + и - припаять? Минусы это 1я и 6я ножки?
Чтобы что-то зарядить, нужно просто подключить минусы и плюсы. Если внимательно изучить показанное видео, вы добьетесь результата.
You are not showing the main thing how to vire the four pin to a 6 pin usb c 😢
It is not usefull this way :(
I can't show a lot because each product has different connection types, which can have dangerous consequences, I just tried to show the connection of the plus and minus in a simple way and the case of easy charging
Can we do this with smartphone
Difficult
Can u show this in phone
Bhai jack kaha se Mila y wala
Eu tenho um pc da china tipo um surface que a entrada micro usb dele é muito ruim, uso somente para carga mas é devagar, será que é possível trocar? E esse mesmo pc tem uma porta usb 3.0 que funciona somente dispositivos 2.0, será possível trocar também pra uma porta usb 2.0?
I love doggy job …so so so much my style, with small difference that mine is worst and rarely works :)
What happens when you cut a usb cable then connect a mobiles charging pin on another side
What is that yellow film?
For insulation, but you can use another film normally
Hey, can you link a pinout out for the Type C port's outside pins?
Aliexpress
@@MrSatech what are the pins for VBUS, D+, D-, and GND?
@@MrSatech dude you make a video but don’t want to share any information nor respond to comments of important details on this swap! Кем ты себя возомнил(а)? explain the procedure in your own language if it’s difficult to write in other language!
If you look carefully at this video and don't understand anything. I don't think you should ever bother with these things. 'Cause you can mess up the device you want to change in your hand
@@MrSatech Thank you! if i mess up this decision i will make on my own! hey but at least i’ll learn in the process! if say very little to explain then most likely a lot of people will mess up! that’s the whole purpose in the first place to make videos for other viewers to learn! not give them halfway information unless you just trolling! any how have a nice day.
Perhaps you were lucky that it worked. It it happened to be a multilayered board, you could have ruined it. Thumb up!
what type of usb c is that
6 pin
Genau
Would this be possible with a ps4 controller
It should work when the correct connections are made.
@@MrSatech ok thank you I might try
@@MrSatech where did you get your connectors and how much were they?
Aliexpress usb type c 6 pin
Osm idea yrr thank u sir ☑️☑️😉
Nice job man
does the usb c fit the micro usb straight away without drilling?
I don't know, you need to do a good analysis of the condition of the circuit, the drilling process is for robustness.
3:44 same bro i feel the same
Can you do a ps4 controller and xbox one controller video of this,I think they will be easier than this but I need method😘
vivo micro right?
Brother you can do anything. But you need to weld to the right spots
What is that tape stuff @ 3:31?
a.aliexpress.com/_vbgYDD
Bga band
@@MrSatech Thank you!
I’m absolutley not recommending doing this with expensive things. Considered you can fataly damage them. I also don’t recommending doing htis with cheap stuff. Cuz you coud’ve sell the old device for like half the original price. Instead of risking breaking iť. And then buy a new one.
how do you do this? did you take engineering classes?
lol its not that big of a deal to do it
Only for smartphones?
I can try it in the future
If this was performed in smartphone - are there any chances of increase in charging speed or transfer of data?
Nopee it couldn't the phone will bootleneck.
You connect the small red wire to where?
Connect the positive lead to the motherboard. You should know the + part of the motherboard
but how to do in phone?
It's done in principle, but not for all of them. First of all, there's got to be room for a connector. Because micro USB take up less space
Wait, so what is the point of drilling the holes?
to be solid
what if you do it on Mobile ?
difficult
Thank you alot. Great information
How did you know, where on the board the + were?
You have to follow the roads