Full Tutorial | Epoxy and Real Flowers Tea light holders | D.I.Y
Вставка
- Опубліковано 26 лис 2024
- Instagram - / colorstorybydivya
Order Here - www.colorstory.in
Resin : / colorstory.studio
Dry Flowers : / theforeverferns
Vaccum Chamber - Biological Enterprises, Delhi
Mould - Online stores from India
I have cast my first (nearly) perfect tea light globes thanks to this video. Everyone else only shows off deep pour resin.
In my case, I should make sure not to overfill the top (base of globe) as it slightly domes. Just a learning moment. Also, adding gold leaf flakes needs care, as they can sorta sink to the bottom of your current layer. But I still like the look.
My resin can demold after 12 hours, but 4 hour interval layering definitely made sure the resin cures enough before the next layer. Also, I wait 3 minutes before pouring the mixed resin. That avoided bubbles without needing a torch.
Thank you for such great detail! I now understand what I have been doing wrong! I stir too fast and not enough layers. BTW I would like your opinion about my technique for removing bubbles as I don't have a pressure pot. I mix the resin in a cup that is sitting in warm/hot water, it makes the stirring so much easier and then after 4 min I just let it sit for a min and all the bubbles are gone. I believe it shortens the work time because of the heat, so it has a slight downside. What are your thoughts please?
I use a silicone stirring/pallet knife to stir. You want to stir slow. With my resin, letting it sit for 3 minutes was enough to wait the bubbles out.
Glad to see you had furry supervisors. 🙀That’s why the card board was needed. Those came out perfect. Did you have to work around the clock to avoid lines in your resin layers?
I realized, after rewatching this, that I definitely need to wait hours between pour steps with mine. I don't have deep pour, and it will definitely minimize bubbles😅.
I am a great fan of your work and tried to make the tea light candle deep casting ,. I had some idea that it has to be done in layers so I poured in 3 layers and ended up
With full of bubbles! Today when i saw your video on you tube I realised so much patient is required to make that!! Thankyou for sharing the tutorial as I had given up on deep casting… but will try now for sure!!
The red one is absolutely gorgeous! 🥰 thank you for such a great tutorial! ❤️
Thank you so much for such a detailed tutorial.....very helpful.....and these looks so beautiful 👌🏻👌🏻👌🏻
Thank you for sharing the detailed tutorial. If possible could you please show us the pressure pot.
Thank You So much Divya for such Beautiful n detailed Tutorial made with so much of Love n Patience 🥰🥰
Thank u so much for sharing such a beautiful DIY. Can u also please make a video on how to use the pressure pot?
Thts indeed so mch of patience....the most awaited video..tks mch fr the share
..wud love to.knw hw the presure pot luks and hw it wrks....tks mch again..gdday!
Lovely video! If I use a deep cast resin that takes 72 hours to cure, should I wait for longer to pour the next layer?
@@colorstorybydivya thank you!!
So useful video,i understood my fault while pouring resin very thick layer and it became very hot 😢and damaged my product... what is the size of mold how much resin poured totly
Beautiful work. How many days did you take to make this project? So you want 3 to hours between each layer. What happened if it was done in less layers
Hi, you’ve done in 3 days so when you sleep at night it will be more than 4 hours… so does it affect the casting??
I have a doubt did u use 2:1 resin ....usually for deep casting usually 3:1 resin right ? I don't have much knowledge correct me if am wrong ...thank you 😊
will the resin from the cup will become hard as well??
Thanks for each and every detail to be followed
How you pop bubble in the mould without pressure pot?
these are lovely but does the resin get hot with tealights or should you use the fake ones
Thanks for this tutorial…. Plz send the material link also…
Thank you for the tutorial, very well explained, in my work micro bubbles are there
May I kno .. what is ur opinion on using 3:1 resin as it can be poured in larger quantities
Can we do single pour in the mould ?
Thank you. This is so beautiful. Can you share where you get your flowers or do you dry them?
I am not seeing the information. If they are from your site I would love to order but I don’t see them on your site either
From where do u get the dried flowers ? Because I dry them at home but the colour doesn’t come so bright … can u share a link as to from where to buy these dried flowers
Kindly check The forever ferns on Instagram
What kind of gloves are you using they look very comfy.. I can't use the medical ones they cause allergies
Hola, las flores las secas en sémola ?
Thanku for the tutorials 💓 beautiful explain
Thank you for this wonderful tutorial.. so helpful .. What size of pressure pot do you use? Would love to have a short tutorial on how to use it.
Thank you so much for sharing this tutorial 😊😊
Hey is the video for pot already out? Been waiting for it!!
Btw, these are beautiful ❤❤
Thank you for the detailed tutorial ❤️❤️
May I know the reason for why layers are not visible ?
@@colorstorybydivya ok ok.. got it
one more thing.. 3-4 hrs means how will be the resin? will that be
hard or sticky?
Sand paper or any tool will affect on shine of resin .. it gives scratches to the art … then how to cure that scratch ?
It’s really beautiful thank you for the tutorial
what type of resin do you use?
can you make short video on how to use pressure pot??
Hi ! What about the tiny holes which have appeared on your tea light holder bottom, can you please tell me how to fix them? Thanks
Y we need a interval ....y can't we put all at same time..i m learning about it....wanna know that's y
Cc le rose est magnifiques
What is the reason to do layer by layer and not all at once??
Hi. Wat is pressure pot
I can’t get it out of the mold bad sticky
check your resin mix
What is the glouse name or type used
What can we do with few small sized gaps that would have been a bubbly but now left an empty space
@@colorstorybydivya Thank you Divya ❤
Lastima que no traducen la explicación
Beautiful✨
Pressure pot link?
Not available
Beautiful!!!!
So beautiful ❤️❤️
I didn’t do step by step
hope this helped
Beautiful
From Jim’s wife Tara that’s gorgeous I did mine all wrong a very sticky ugh Jesus is awesome yours is beautiful thanks
Thank you! Cheers!
Podrías por favor poner con subtítulos muchas Gracias 🙏🏻
Love ❤️ 😍
✨🙏✨
ارجو ترجمة الفيديوات الى اللغة العربية.. وفقك ربي
👍👍👍👍👍
Beautiful ❤
Beautiful