any tips or hacks you got. im as we speak starting to attempt to replace my nozzle springs with a precision dynamics set for my MWS noveske. if so cool if not no worries if your busy no worries as well. cheers
You got a subscribe not only because you know what you’re talking about, but when you stopped and said “GEORGE” 😂 I don’t know why but it was the funniest thing ever lol
Getting the actual branded Velcro. Nice. Around here I can only afford hook and loop off brand 😆You just have to move over and start running full stock M14s. No wobble. In all seriousness though this is a clever fix.
How coincidence this video pop up on my feed just right after i bought a LMT Sopmod Buttstock that wobble when i put it on my buffer tube. I previously use some electrical tape to stop the wobble but i think i might use your tips from now on, Thanks for this step-by-step video, dude! really helpful.
If you don't like wobbles, don't buy an ar15 plateform Even on real M4 you will get it and it's normal, lower/upper is corrected by accu wedge but you will have some here and there anyway. It's a normal thing on ar 15 and that is good in a way, that's wobbles come from holes that permish to the dirt/water to get out and don't compromise the rifle I like the ar15 but Personnaly i prefer the G36, but mortly because i learn and train more with it
Also congratulations on the mention from jaeger precision! You deserve it with the quality and quantity of content you’ve been putting out! Quickly becoming my most look forward to UA-camr.
@@mysteryboxes I do the magwell but need to test the mags so you know if any are too big. I used to do the magazines but the constant insertion and removal in a pouch often made it unusable so I went to the magwell. I've tried it in lowers and outer barrels sometimes its too much and sometimes I'd melt the one end.ive also used to to shim cheap attachments that might not be plumb. im so anal I put tape under attachments as to not scratch the rail. lol
I do it to mags as well that shit drives me f-ing mental. sometimes you need to taper it at the end so the edge of the stock or buffer tube doesn't catch it and scrunch it up
@@mysteryboxes I also use dynamite or butul rubber. its sound and vibration deadening mat in receivers where I can fit it and I 100% make some difference. good luck mate. cheers
Might wanna get some mic for these. Or adjust volume through editing. Not gonna lie I'm on my phone using earpods and my volume is maxed out and that's the minimum to hear you properly. Good tip I hadn't though of that.
Do you have a trick to do this?
any tips or hacks you got. im as we speak starting to attempt to replace my nozzle springs with a precision dynamics set for my MWS noveske. if so cool if not no worries if your busy no worries as well. cheers
Done mine with some electrical tape, just about 4 or 5 layers in a small rectangle at the front and rear of the buffer tube worked a treat.
@ love that! I bet you can be more specific with tension.
@@gregoryfranks7347 I have done that mate but have normally watched other UA-camrs videos to do it. No specific hacks on that one.
@mysteryboxes yes 100%. Just added more layers till it was a nice fit
You got a subscribe not only because you know what you’re talking about, but when you stopped and said “GEORGE” 😂 I don’t know why but it was the funniest thing ever lol
Haha! Thank you!!!
Just got my xm5 and that’s the first thing I did !
Just gotta figure a way to fix the little receiver wobble now
I used an Accuwedge from APFG. The one they put in the Spear LT and MPX
@@mysteryboxes Thx for the informations, will order one !
Getting the actual branded Velcro. Nice. Around here I can only afford hook and loop off brand 😆You just have to move over and start running full stock M14s. No wobble. In all seriousness though this is a clever fix.
Haha! Love those brands and trades mate!
How coincidence this video pop up on my feed just right after i bought a LMT Sopmod Buttstock that wobble when i put it on my buffer tube. I previously use some electrical tape to stop the wobble but i think i might use your tips from now on, Thanks for this step-by-step video, dude! really helpful.
Gorilla tape is also a very good option.
ABssolutely! Glad i could helop!
That sounds good!
Nice setup 👍👍👍👍
Thanks mate!
Interesting mod. I've always just put 2 strips of electrical tape on the right and left side of the buffer tube.
Im sure that is great as well!
Good mod!
Thanks mate!!
How are you stopping the upper and lower receiver wobble?
I hsave an accuwedge from APFG that is in the SPear LT and MPX. I think you can get them from WGC.
Where can I pick up one of these spear LTs? They look sick and I love gbbr
Got mine from Octagon Airsoft and they will do trades. I have a full video on it
If you don't like wobbles, don't buy an ar15 plateform
Even on real M4 you will get it and it's normal, lower/upper is corrected by accu wedge but you will have some here and there anyway. It's a normal thing on ar 15 and that is good in a way, that's wobbles come from holes that permish to the dirt/water to get out and don't compromise the rifle
I like the ar15 but
Personnaly i prefer the G36, but mortly because i learn and train more with it
Yeah i use an accuwedge in all of mine
Thanks for the information! I’ll be doing this to my DE N4 MWS gbbr. The stock wobble isn’t too bad but it’s enough I’d rather not hear it lol.
Also congratulations on the mention from jaeger precision!
You deserve it with the quality and quantity of content you’ve been putting out! Quickly becoming my most look forward to UA-camr.
Absolutely mate, glad I could help!
Thanks mate! It was a real honor!
Is this the Toxicant XM5?
No this one is the APFG Spear LT 11 Inch
i only use the furry side of a square tab of velcro. sometimes 1 at rear and 1 in the middle. i also use it in the magwell
Magwell. I didn’t even think of that
@@mysteryboxes I do the magwell but need to test the mags so you know if any are too big. I used to do the magazines but the constant insertion and removal in a pouch often made it unusable so I went to the magwell. I've tried it in lowers and outer barrels sometimes its too much and sometimes I'd melt the one end.ive also used to to shim cheap attachments that might not be plumb. im so anal I put tape under attachments as to not scratch the rail. lol
I do it to mags as well that shit drives me f-ing mental. sometimes you need to taper it at the end so the edge of the stock or buffer tube doesn't catch it and scrunch it up
That’s a great point!
@@mysteryboxes I also use dynamite or butul rubber. its sound and vibration deadening mat in receivers where I can fit it and I 100% make some difference. good luck mate. cheers
@@mysteryboxes dynamat
@@gregoryfranks7347 I’ll check that out!
Might wanna get some mic for these. Or adjust volume through editing. Not gonna lie I'm on my phone using earpods and my volume is maxed out and that's the minimum to hear you properly. Good tip I hadn't though of that.
Yeah i dont know why but the mic has been dropping audio in the last coule of videos. Trying to resolve