Hi George, great job, but would it not be far easier to simply wind another set larger gauge of coils on top of the existing ones to get a transformer effect from the second windings as well as an additional motoring effect from them. It draws far less current as well. Thank you
Wait what? Ive not new to the diy but im no expert on the finer motor "adjustment". My current goal is too alline my rv roof (2 tall side to side) with small computer fan engines like this. Too charge 2 big deepcycle batteries (12v system). Id be open to any input you might be willing to give on both your winding technique and my prodject.
Noise was like Eleventy million cats in a blender with a hangover in a broke down minivan in a blizzard with 5 feet of snow and you're out of gas and the nearest off ramp is 12 miles away. Seriously dude that was impressive dedicated winding but that noise was death reversing in a 1,200 year old cemetery with unmarked graves..
interesante, se tendría que probar con considerar poner capacitores de e de poliéster y polarizado. al final no se observa con claridad como hace la coneccion inicio con inicio, final con final o inicio con final de cada polo , gracias por el aporte
Good works but I see you help the wing for turning why, this is not work? And you firstly remove the 3 fan cables then you connect 4 cables what is the difference in between? And the end of the work why you don't connect again the fan circuit, because you removed,
I could follow every single step. nice job. I enjoyed it very much. light and zooming was incredible also.
Buying one helps my research tremendously, helping me get all the supplies I need for the future. Visit my store on ebay: www.ebay.com/usr/eleman-gc
Hi George, great job, but would it not be far easier to simply wind another set larger gauge of coils on top of the existing ones to get a transformer effect from the second windings as well as an additional motoring effect from them. It draws far less current as well. Thank you
Wait what? Ive not new to the diy but im no expert on the finer motor "adjustment".
My current goal is too alline my rv roof (2 tall side to side) with small computer fan engines like this. Too charge 2 big deepcycle batteries (12v system).
Id be open to any input you might be willing to give on both your winding technique and my prodject.
You and GentleWhispering with that ethereal intro music : )
Verry nice thanks for video
que arte! gracias por la explicacion. Saludos desde Espanha
Thanks for the video you just taught me a bunch !
Noise was like Eleventy million cats in a blender with a hangover in a broke down minivan in a blizzard with 5 feet of snow and you're out of gas and the nearest off ramp is 12 miles away.
Seriously dude that was impressive dedicated winding but that noise was death reversing in a 1,200 year old cemetery with unmarked graves..
Dude, 😅😅😅
interesante, se tendría que probar con considerar poner capacitores de e de poliéster y polarizado. al final no se observa con claridad como hace la coneccion inicio con inicio, final con final o inicio con final de cada polo , gracias por el aporte
Vc merece like pq detalhou todos os detalhes da quantidade de espiras mesmo não falando no vídeo vlw
Bor was für ein toller Lötkolben!👍
This fan very beautiful
Thank you
its amazing
I followed every single step interestingly but at the end ,we have to move fan by finger.
requiere poner condensador de poliéster y otro electrolítico para el arranque ya que es sin escobillas , motor trifasico
Good video
Bro you are legend great thanks
Worth sharing!! Could you please tell about the material used in stator?
I need it for simulation purpose
Good works but I see you help the wing for turning why, this is not work?
And you firstly remove the 3 fan cables then you connect 4 cables what is the difference in between?
And the end of the work why you don't connect again the fan circuit, because you removed,
How to turn it on with DC voltage? ( Negative / Positive )
Thanks
Dream on!
Hi, awesome channel. Have you tried rewinding a ceiling fan motor yet? Want to use mine?
Thanks! mayby, stay tuned...
Illy e waiting
Good project and the plans of the plate please,Thank you
Qoboltu gus insya allah barokah untuk gus dan keluarga,saya ingin mengamalkannya minta izin gus barokahnya
does any one know where i can get 2 mmg-041 hamlin effect bedini control boards/cheers with 2 blue capac- on end of board
If you make different color wire ...that be much better for know that.... connection
U should use hall sensor! Without hs this fan wasting some current. And what is this annoing sound?
Those heavy breathing makes it hard to watch hahah
you forgot to put oil then upside down.
Controller pcb circuit plz...
A música é muito bonita.
Nice video! May i know if you use a larger size of coper? I want to speed up my fan. What size do you prefer?
Use thick wire but not too thick
Can we increase rpm of this fan
Can it achieve over unity?
WIND BLADES
Brother, I need your help a little bit
what did you put in the fourth pin for? The stator had only 3 connections. Regards
5:35, this is from the diode pin!
25:58 I thought there was an air raid warning... lol my age is showing....
why need rewind that? its alredy 12v 0.15a from china shop.. i thought you were at least increasing amperage at 12v.. wat a timewaste!
I think he bored because Corona so he did this
👍👍👍👍👍👍👍👍
Make it run on battery🔋
Hi George, I'd like to contact by e.mail in order to present u an update of bedini fan motor projet.
It work without energy?
💣
13:56
hi sir this board circuit digram send me
www.free-energy-info.co.uk/Ch6/Fig26.gif
double wrapping in a rotor ..... scrawl
Karamci TV
Wow, the greatest respect for your skills ....but please find a new hobby.