I'm experiencing an issue with my powder coating machine. When I set the powder setting to zero and the air to 6.5, the powder comes out. However, if I set it to 70 or any other number, the powder doesn't come out.
@@NoLimitS17 on page 45 and 46 in the manual is the best place to go to learn how to set zero. all manuals can be found online under Support. Or if you have the Gema app you can click on the service button and it will take you to the man. On the side of the control unit it’ll tell you which one you have. Let me know if this helps.
I would imagine you are sandblasting the aluminum. And you’re probably using some type of super durable. You might want to try chemically treating it rather than blasting.
I would try it on the complicated setting. Or try 100 KVN 18 UA. Make sure the pump is well-maintained. You can see the video on maintaining the pump on my channel.
larosaj1 it will work. Not recommended. Best to move total air up and drop the 100 down. Are you just needing more powder or is there some type of application you are trying to do
I'm experiencing an issue with my powder coating machine. When I set the powder setting to zero and the air to 6.5, the powder comes out. However, if I set it to 70 or any other number, the powder doesn't come out.
@@NoLimitS17 on page 45 and 46 in the manual is the best place to go to learn how to set zero. all manuals can be found online under Support. Or if you have the Gema app you can click on the service button and it will take you to the man. On the side of the control unit it’ll tell you which one you have. Let me know if this helps.
What psi do you recommend at the regulator/main supply?
hello, please, if you can explain to me, why sometimes small dots appear on the painted surface. Aluminum profiles
I would imagine you are sandblasting the aluminum. And you’re probably using some type of super durable. You might want to try chemically treating it rather than blasting.
HI . I USE gema machine big one with 4 guns.... i see when i paint the aluminium have a lot of Shadows ...hiw can i fixet? Thx
I would try it on the complicated setting. Or try 100 KVN 18 UA. Make sure the pump is well-maintained. You can see the video on maintaining the pump on my channel.
hi
can you please explain how to make reset the machin ...my problem is , the powder not going out the tank .
Ahmad Dalol please take a look at the pump video.
Did you fix it ? My powder is not getting sucked
Can you please tell me the psi recommendation on the back please
Do you need a minimum of 85 psi?
The powder is not getting sucked , what could it be ?
LOUKIOS VICTOR Most likely it’s in the pump. Have you went through the pump video maintain the pump?
I want to know if the module can works at 100 percent on the power and 4.5 on total air. Is that correct?
larosaj1 it will work. Not recommended. Best to move total air up and drop the 100 down. Are you just needing more powder or is there some type of application you are trying to do
It would be better if it was at 70 and 5.5 should give you a better balance of powder and Air
95 psi