Ford Focus Titanium X Headlight Problem With Headlight Malfunction Service Required On Dash

Поділитися
Вставка
  • Опубліковано 9 жов 2024
  • Hello and welcome
    This episode i have a ford focus titanium x in with a problem with the headlight defiantly a mot fail it has headlight malfunction service required on the dash

КОМЕНТАРІ • 64

  • @GP-RC
    @GP-RC 6 місяців тому +2

    I have this problem but mine is intermittant. What I have to do when driving is pull over, turn the steering all the way to the left and the headlight sorts itself out for a little while. I will investigate that plug. Awesome video, thank you.

  • @lawrancemakama646
    @lawrancemakama646 7 місяців тому +1

    Thank you so much for this...replacing the whole headlight is too expensive. This will save me a lot . Hope it will work me aswell.

  • @dstarbee
    @dstarbee 9 місяців тому +1

    Nice work. Having this problem myself, although wires appear intact, didn't dissemble as far down as you. Will give it a further crack myself, but may pop down to you as you're not too far away at all. Thanks for the upload!

    • @ResurwreckAutosUK
      @ResurwreckAutosUK  9 місяців тому +1

      Hi mate no problem I can sort it out pop it to me 👍👍

  • @cliveroulstone9366
    @cliveroulstone9366 Рік тому +4

    Your worth your weight in gold well done

  • @leedshunk
    @leedshunk 8 місяців тому

    Thanks to your tutorial here I've fixed the same problem on my ST3 ! THANKS so much 😁🙏

  • @jazzupme1
    @jazzupme1 9 днів тому +1

    Hi Mark,I have this same problem with my Focus Xenon headlight. While searching the net I came across your tutorial. I discovered that 2 wires have come off this connector but to get at it I need to remove the balast. Please could you tell me the name of the socket for the 3 screws holding the balast plate on, also can I buy a new connector, if so what is the name of it. As you point out this could save me a whole heap of money (£1200). Thank you in advance. You are gold.

    • @ResurwreckAutosUK
      @ResurwreckAutosUK  9 днів тому

      @@jazzupme1 Hi mate I’m glade you are trying to fix this problem your self you will save loads of money on eBay search Ford Focus headlight repair kit you will see listing with some wires coming out of a block some have two wires some have 3 wires find out which one you have and buy that one the screws on the ballast I think or toques T15 or a T20 hope this helps and good luck 🤞🏻 👍

  • @trevorjarvis3021
    @trevorjarvis3021 Рік тому +1

    You did very well Mark, Bob should be well pleased. Great result. 😊

  • @snipturn
    @snipturn 9 місяців тому +1

    You think £1,200 is bad for a headlight? Good job you didn't need a bulb. Took my 2015 Titanium X in for a headlight randomly working when it was being serviced at Fords. They're recommendation was to replace the bulb (same Xenon bulbs that you have) and for that they were going to charge £410 - that is JUST to replace the bulb. The bulb was £260 and then 1hrs labour at £150 to fit it. The service guy couldn't believe and had to double check himself and came back astounded saying that it was correct! Took it to Halfords and had a new bulb fitted for £54. I went home and looked it up for myself and official Ford parts on ebay (direct from Ford) and sure enough the bulb was being sold for £260!

  • @nigelbryant5932
    @nigelbryant5932 Рік тому +2

    Absolutely amazing result. Thank you so much Mark. 👍👍

  • @MohdjesriOthman-oi1id
    @MohdjesriOthman-oi1id Рік тому +1

    Nice work mate,you mark has good job diagnosed this ford focus titanium x hatchback head lights,after scan this model,I hope will pass the m.o.t.

  • @PhantomNovelist
    @PhantomNovelist 4 місяці тому +1

    After fixing cables inside the headlamp, if everything is still dead, check fuse F39 (5 amps) under the hood. Got the same problem on my Focus MK3,5. I guess destroyed cables shorted the electric system and the fuse blowed. Bulbs were working but all the functions were lost (autoleveling, high beam, turning the beam left-right). In Forscan, got a few fault codes in HCM (6 codes total, 3 unique codes per "side", basically saying there is no response from autoleveling, adaptative module and light shutter). Changing F39 fuse (5A) fixed everything.

  • @marcusmaximus451
    @marcusmaximus451 Рік тому +1

    Superb job there Mark, as you know I sorted my park pilot malfunction service required by unplugging some bits and the module and cleaning them with WD 40 electrical contact cleaner always handy to have a can of that in the tool box or shelf
    Your vlog has no doubt helped others out there who may have or have had the same issue catch up soon take care matey 😃👍

  • @MichaelWrankmore
    @MichaelWrankmore Рік тому +1

    Interesting work good result. Ive got same headlamp malfunction warning on Focus Titanium X (2011) and need the cheaper fix. Can you let me know who your auto electrician that sorted is? Thanks.

  • @markmackay548
    @markmackay548 7 місяців тому

    Hi there watched your video was so helpful thanks. I have had same problem and also stressed of the cost this can be I took my focus 2016 to my local garage and they solderd the wire he explained to me roughly the same problem that you specified in video and the fault has happened again now stressed that may have to buy headlight but in your video you said that you can pickup wiring connectors for unit as my last resort . So my question is what type and were can a source these connectors. Again thanks for video it has took alot of stress off .

  • @danielsellers8538
    @danielsellers8538 Рік тому +1

    Another one bites the dust problem solved well done buddy

  • @anthonystone6214
    @anthonystone6214 Місяць тому +1

    Hey. I’m having the exact say problem. Just check and my wire has done the exact same! Can I be cheeky and ask what part you was going to order from eBay please 🙏

    • @ResurwreckAutosUK
      @ResurwreckAutosUK  Місяць тому

      @@anthonystone6214 hi mate just search on eBay for Ford headlights repair kit you should see them just need to order the correct one headlight needs taking to see

    • @anthonystone6214
      @anthonystone6214 Місяць тому

      @@ResurwreckAutosUK hey I’m struggling to find the correct part. Any chance you have a email address I can contact you and send you an image of it please?

  • @DrTrax1887
    @DrTrax1887 4 місяці тому +1

    Hey there, i have the same problem! I replaced the 4-pin connector and checked the fuse but the headlight malfunction message still pops up and the high beam doesn’t work.
    Do I have to delete the error codes in the Control unit?

  • @Weedl3ss
    @Weedl3ss Місяць тому

    Nice job. Do you remember the code of the connector. I have the exact same problem 😢😢😢 ?

  • @RohanHerzig
    @RohanHerzig 4 місяці тому

    awesome video, i also have this issue on my focus RS Mk3, i have a question how do i remove the white plug attached to the board i have tried everything. my wire broke here and not on the small black plug =/

  • @tanasesebastian5063
    @tanasesebastian5063 9 місяців тому +2

    Exactly the same problem on a '16 Focus ST, just on the right side

  • @vov9261
    @vov9261 Рік тому +1

    That's a great job you done there. Cheap fix compare to new headlight.
    I have 2015 titanium x as well, but my lights stick to the right when I drive. When stop they going straight until next turning right. Still looking on Internet what could it be.

    • @ResurwreckAutosUK
      @ResurwreckAutosUK  Рік тому +1

      Hi maté sounds like the wiring check that first 👍👍

    • @vov9261
      @vov9261 11 місяців тому +1

      Yesterday took the headlights, disconnected the wiring all look good apart from high voltage 1, put some insulation tape to keep the outside wire together. Reconnected everything and it's working fine so far. I think it was a lose connection somewhere. Will keep an eye on it.

    • @NuKeR_58
      @NuKeR_58 5 місяців тому

      Hi guys, the same issue, headlight sticked to the one side occurling in my Ford Focus 2016 too, but l have No malfunction signal on my display screen. I took the headlight out but there is no broken wiring. The problem comes out when the inner Headlight key is on Auto mode. What do you think? I am fed up with this issue.

    • @vov9261
      @vov9261 5 місяців тому

      @NuKeR_58
      I fixed mine. Cleaned all the pins inside of the headlight and outside. Then 2 month late other headlight started doing the same, no fault on dashboard. It was pins outside not gripping tight enough.

    • @NuKeR_58
      @NuKeR_58 5 місяців тому

      @@vov9261 thnx for information, when l try it , l'll keep you posted.

  • @johnmccarthy-jones1250
    @johnmccarthy-jones1250 Рік тому +1

    Well done Its a bargain of a repair

  • @pkmisma
    @pkmisma 5 днів тому

    I do have the same car 2015 Titanium X red colour. But the warning msg comes intermittently and the high beam works fine. What could be the issue

  • @normanstephens5391
    @normanstephens5391 Рік тому +2

    Hi Mark.
    Super fix on the headlight. Just goes to show you. With a little more Investigation Can. Result in a cheaper way out. Cheers.

  • @rickwilliams1505
    @rickwilliams1505 Рік тому +1

    Brilliant result and find

  • @bigsquatchsasfoot1964
    @bigsquatchsasfoot1964 Рік тому +2

    Nicely done Mark ….I have no idea why they put all this crap on cars It’s just not necessary in my opinion! well I do to make a load of cash I guess lol hopefully that’s it sorted 🤞or poor old Bobs gonna be eating beans on toast for a while !

  • @Lasercapri
    @Lasercapri Рік тому +2

    You saved him a few BOB 😂👍

  • @RLT_Official_Music
    @RLT_Official_Music 11 місяців тому

    Hi! I have the same shit problem. I keep getting this error, and the thing is that sometimes it’s working just fine. When the fault comes up, I’m unable to use the beam light, and the light are getting pointing low, and not wide as usual. It’s Ford S-Max 2016. Where are you located? Cheers!!!

  • @bretthale9290
    @bretthale9290 Рік тому +2

    Great fix but i don't get all the stressing,worse case could have found a secondhand headlamp

  • @stevenjones19-m8i
    @stevenjones19-m8i Рік тому +1

    Hello Mark well spotted that was of a broken wire,it has definitely saved £1200 for Bob.fingers crossed it has solved the problem.

  • @martinfield1484
    @martinfield1484 Рік тому

    Well done mark in finding that great result saved £££££££sss

  • @leannejolley3
    @leannejolley3 7 місяців тому

    I have this exact issue with passenger side but I have water in it. No matter what is replaced and how much I spend it fails the mot every year as the condensation gets in😢

  • @Propolizei
    @Propolizei 6 місяців тому

    I have the same error on board. I've noticed that my "eyebrow" leds that are parts of my daylights are both turn on on contact, but when I turn engine on, right one turns off after 5 sec, and sometimes left one also after some time. At evening, everything is fine, both leds turn on s part of night lights (via photo sensor on front glass)
    Car is Ford focus titanium 2011.
    Any help? Thanks

  • @simonsuv8376
    @simonsuv8376 Рік тому +2

    I have a 65 reg focus titanium x had exactly the same issue with the headlight same wire bought new plug of ebay £8.50

    • @keithanderson1768
      @keithanderson1768 11 місяців тому

      Hello mate, do u have a link for the plug u bought as I have the exact same issue with my light. Or do u know what it is called please? Thanks

    • @anthonystone6214
      @anthonystone6214 Місяць тому

      Same question lol

  • @aurelplavat3647
    @aurelplavat3647 8 місяців тому +1

    Got same problem thank you

    • @ResurwreckAutosUK
      @ResurwreckAutosUK  8 місяців тому

      Definitely can be fixed don’t take it to a Ford main dealership

  • @4STR4L_VR
    @4STR4L_VR 3 місяці тому

    Hi can you help please, I have a faulty with my dipped beam keeps bringing up a error code and failed its mot, coikdcthis be the same issue, they have quoted me £2000😢

  • @filipnikolic8805
    @filipnikolic8805 8 місяців тому

    Where is the PIN for high beam activation.......I have a problem because I replacet my halogen lights with these original biXenon BUT high beams doesnt work, I think because of different pins...........
    PLease help me!
    Thny

  • @alancobbin
    @alancobbin Рік тому

    Hey if the total bill is a few hundred quid I’ll take that over £1200 any day of the week,nice one fella 👍💪😉

  • @jazzupme1
    @jazzupme1 9 днів тому +1

    Thanks!

  • @arifsanni6609
    @arifsanni6609 7 місяців тому +1

    How can you be reached, my ford focus has a similar fault and requires fixing, please.

    • @ResurwreckAutosUK
      @ResurwreckAutosUK  7 місяців тому

      Hi mate you can email me buddy
      Resurwreckautos@outlook.com

  • @alanmoore1698
    @alanmoore1698 Рік тому

    Absolute brilliant work without light to think Ford wanted 1200 pounds for a loose wire

  • @giovannynavarrete3467
    @giovannynavarrete3467 9 місяців тому

    Muchas gracias problema resuelto y ahorro 2000€ en taller oficial

  • @mandymoo7406
    @mandymoo7406 Рік тому +1

    it was a simple soldering job why give a bloke 50 notes?if you couldnt have got to the lug i would have got my cutting wheel out cut a big hole in the light and then rewelded the body back in position and covered it it soudal sealant,next job please😊

  • @Afnty_Bhekifa
    @Afnty_Bhekifa 6 місяців тому +1

    Having the same problem, unfortunately I live in S.A😂..

    • @ResurwreckAutosUK
      @ResurwreckAutosUK  6 місяців тому +1

      Hi mate very common problem no recall from Ford 👍

    • @Afnty_Bhekifa
      @Afnty_Bhekifa 6 місяців тому

      I’ll be selling mine, just changed fuel pump a month ago..

  • @Openfly
    @Openfly 11 місяців тому

    Thx 🙏

  • @micklarkin1434
    @micklarkin1434 Рік тому

    needs a new light m8 I ad exactly the same thing on my one