3000 PSI - Making a PCP air gun tube tank and valve
Вставка
- Опубліковано 18 вер 2024
- Making PCP 3000 PSI Valve and Tank
Fund my projects: buymeacoffee.c...
In this video I made a threaded tube tank with a manometer connector and a valve for 3000 PSI. I also used a chamfer technique to make the valve very easy to open. This video shows the making of a very simple inlet system as well.
Shoutout to Ai rSight27 for help on chamfer ideas and valve inlet: / @airsight2753
Note: This video is for educational and entertainment purposes only. Do not emulate or copy anything you see in this video.
LATHE used in the video:
MINI Lathe 7x16 800W (Europe and USA link): s.click.aliexp...
Asia link: s.click.aliexp...
PCP Airtang 6000 is back with another video 🥶🔥
What is bro yapping about 😅
Please use anti seized on all threads that are of the same material, especially fine threads.
Fast working for your make adaptor tube, maybe i'll not making like you,with tool i have. Excelent 👍👍
Very cool! I need to get myself a lathe. Did you see my BigBore?
I didn't, I'll check it out!
Fc from Thailand bro
Can I use Copper instead of aluminum, and is aluminum expensive?
Copper is very expensive And aluminium is the cheapest metal. Copper is A bit unusual but would work
@@pcpairgunschannel can you please make Video on how to make a regulator that can change its capacity from the outside. Thank you for your effort❤️❤️
@@user-xp9zg8pf5r it's complicated but maybe one day I will make videos about regulators
If price is a concern copper is more expensive than aluminium and weaker too, you'll need more material and thicker walls on the reservoir to achieve same strenght at equal amounts of pressure, raising the price even more.
More sir
Show de bola 👌👊🤝♥️🇧🇷
thank's thank's !!
Is this tube 7075 aluminium?
It is 6061 aluminium
When is receiver coming???
in a few weeks to a month, i will make hammer and trigger first.
Jooos brathers👍🏿👍🏿👍🏿
尺寸可以详细说明吗？感谢您
How much to make one
sorry, i can't sell them due to courier policy
什么材质？
6061 aluminium
How to order sir ?
I'm sorry, it's not for sale. This is just for entertainment
Hernandez Mary Anderson Kimberly Young Angela
Dude i take it you have no proper thread cutting on your lathe ? are you totally gauging it by hand and hoping for the best ? 😁🤘
I could have done it but there was an issue
I'm guessing like on my mini lathe slow speed is terrible so I also turn the chuck by hand. The lead screw is however connected with the right gear ratio for the pitch. Your using slow speed muscle instead of crappy electric motor 😅😅😅
@@andrewworley8946 Yup. slow speed is better on actual big lathes rather than these mini lathes.
Dude! Your gonna get a nasty cut on your hand playing with the swarf (the curly bits of metal coming off the cuts your making). One day your gonna grab and it will bite you.
So what should I do
@@pcpairgunschannel don't touch it, use pliers to remove it. And certainly not when it's moving
@@ronmillis8143 okay, I will try to keep your advice in mind. I am still new to machining (about 6 months in)
@@pcpairgunschannel also lot of research and reading about speeds and feeds, lathe tool geometry. If these combined correctly you shouldn't get great lengths. It's nasty stuff. Literally thousands of pics of people who've been hurt by it.
How much po
sorry, i can't sell due to courier policy in my country