There have been new rules brought in with regards to construction of High Rise building in Tamil Nadu. This video will be useful for upcoming builders and investors who will be interested in construction of high rise building.
one more question - All regulations in cmda chennai building code are specified in meters. 1. I have a plot that falls under chennai corporation(cmda) that is 30 feet width(facing road) and 50 feet long. Road width is 20 feet. If i consider plot width in feet, I will have to leave only 5 feet set back on one side. But the building code says anything above 9m(29.5 feet) should have 1.5m on both sides or 3 m on one side. Which one is correct? 2. Going a little bit further, if my abutting road width is 20 feet(6.096m), am i allowed Stilt + 3F or Stilt + 2F? i guess the conversion is a bit confusing when measurements are in borderline. Is there any truncation rules to follow? I have not come across any
Sir, i have a question on FSI for non-high rise building. Say if i want to build a property that falls under CMDA that is abutting a 20 feet road with Stilt + 3F(as a pent house), can i use any part of stilt to build a covered area and include it in FSI calculation? I want to build a storage room. Stilt will be open on all sides per regulation. I am planning to use some area in the middle of stilt to construct a covered storage room. kindly advise
Hi sir. I just want to know how much total area required and also how much frontage of plot required if i want to construct high-rise building on 40 feet road.
@@mothishkumarpropertycoach6571 I have a interesting question on this one. Let us say i apply for plan approval per setback rules of 5 ft(1.5m). and start building a house with reduced set back. At time of completion certificate, per norm there is a tolerance of 0.3 mts on all sides that is acceptable. Am i constructing this structure illegally? Will it cause problems for me in future for any other approvals such as adding a new floor if building rules are amended. From what i read through the codes, the tolerance is acceptable and not illegal per TNCDBR-2019 and further its amendment in 2020. Please advise.
Sir could pls explain how to get ulc clearance . Can I get anyone contact details. Have applied patta but it was ignored they are telling the land is ceiling
There have been new rules brought in with regards to construction of High Rise building in Tamil Nadu. This video will be useful for upcoming builders and investors who will be interested in construction of high rise building.
கேப்பிட்டல் கெயின்ப் பற்றி (மூலதன ஆதாயம்)
ஒரு விரிவான காணொளி தங்களிடமிருந்து எதிர்ப்பார்க்கிறேன் சார்
mogan t will do as early as possible sir
@@mothishkumar9689 சந்தோஷம் தங்களுக்குயிருக்கும் மிகுந்த பணிகளுக்கிடையே எனக்கு தாங்கள் பதிலளித்திருப்பது மிக்க மகிழ்ச்சி
நன்றி
THANK YOU SIR
one more question -
All regulations in cmda chennai building code are specified in meters.
1. I have a plot that falls under chennai corporation(cmda) that is 30 feet width(facing road) and 50 feet long. Road width is 20 feet. If i consider plot width in feet, I will have to leave only 5 feet set back on one side. But the building code says anything above 9m(29.5 feet) should have 1.5m on both sides or 3 m on one side. Which one is correct?
2. Going a little bit further, if my abutting road width is 20 feet(6.096m), am i allowed Stilt + 3F or Stilt + 2F?
i guess the conversion is a bit confusing when measurements are in borderline. Is there any truncation rules to follow? I have not come across any
Sir height is included parafit or only final concrete 2)under ground floor including totel height of the building
Sir what is the space required for the place windows to adusent house
Sir, i have a question on FSI for non-high rise building.
Say if i want to build a property that falls under CMDA that is abutting a 20 feet road with Stilt + 3F(as a pent house), can i use any part of stilt to build a covered area and include it in FSI calculation? I want to build a storage room. Stilt will be open on all sides per regulation. I am planning to use some area in the middle of stilt to construct a covered storage room. kindly advise
Hi sir.
I just want to know how much total area required and also how much frontage of plot required if i want to construct high-rise building on 40 feet road.
My plot is near 20 feet road...the building was stilt + 3floor.I just want to know about the set back distance all around the building...
Which location, all round 5 feet is enough however exactly we can know with plot frontage
To construct stilt + 3 floors do we need to get permission sir!?
Sir I am from kolathur we have 20ft
@@mothishkumarpropertycoach6571 I have a interesting question on this one. Let us say i apply for plan approval per setback rules of 5 ft(1.5m). and start building a house with reduced set back. At time of completion certificate, per norm there is a tolerance of 0.3 mts on all sides that is acceptable. Am i constructing this structure illegally? Will it cause problems for me in future for any other approvals such as adding a new floor if building rules are amended.
From what i read through the codes, the tolerance is acceptable and not illegal per TNCDBR-2019 and further its amendment in 2020. Please advise.
Sir I have corner plot both sides 30feet road can I able to build high rise building
Sir my plot is near 12m road, I want to build a kalyana mandapam... What is the all around set back distance?
7m all around
Sir could pls explain how to get ulc clearance . Can I get anyone contact details. Have applied patta but it was ignored they are telling the land is ceiling
You have to approach the advocate who are specialised in breaking the urban ceiling on your land .