@@michaelstjohn2617 Yea, the hardest part for me was getting the final assembly all lined up and then locking the clutch engaged. It would be easy if you have another drive drum, but without one I just used straight edges and gently tapped on things using a small hammer and wood blocks to line up the disks. Getting it all shoved back into the tractor is a little tricky too. Having a temp platform attached to drawbar to support the weight helps a bunch. And patience!
Very impressive, I have to do the same work on a JD R tractor and definitely better prepared now, thanks for your video work!
@@michaelstjohn2617 Yea, the hardest part for me was getting the final assembly all lined up and then locking the clutch engaged. It would be easy if you have another drive drum, but without one I just used straight edges and gently tapped on things using a small hammer and wood blocks to line up the disks.
Getting it all shoved back into the tractor is a little tricky too. Having a temp platform attached to drawbar to support the weight helps a bunch. And patience!