How to Install a MudGuard Support on Xiaomi M365/M187 or Pro
Вставка
- Опубліковано 15 вер 2024
- Xiaomi Mijia M365, M365 PRO and M187 Scooter - modifications and fixes.
For parts: www.curiousjoe.se
Made to give you a longer ride!
Please give a thumbs up, subscribe or share if you liked it.
Send an email if there is something I can do better, you´ll find it on www.curiousjoe.se.
finally you upload a video man!!
Finally had some time to make a new video.
Nice to hear that my work is appriciated :)
Hey I got my bumper support today , very quick delivery. Fitted it perfectly after watching the video . Thank you 😊
Glad you liked it :)
thanks for the video! you saved me tons of time!
Very nice video. Once I get my M365 Pro imma be stocking up on some goods from your shop. Have you considering getting some sort of lock mechanism, that strengthen the (kinda) weak stock lock? Have seen people use the "Falcon Lock" but there has got to be a simpler and more sleek way of doing it, without having to disassemble the whole scooter.
Thanks. You are going to be happy with the Pro, it is a great scooter. I will look for a good lock. Thanks!
@Curious Joe Did you get any squeeking from the breaks when you are soft breaking from this? I did after I installed a similar where you are screwing it on the to scews that goes on the wheel.
Never any squeeking. If from the breaks I would check if the breakdisc is centered.
Very nice video !
Thanks :)
My goodness. Too late to saw this one. My ride is always rough when I changed my wheels to solid tires. It even break my mud guard. Never knew that it can be replaced. I fixed it with Epoxy Putty. :(
Check out our store, we got what you need 😁
curiousjoe.se
@@curiousjoe2410 Thanks mate~. Will seriously consider this once the Epoxy Putty wore off.
3:44 when did you take OUT the ledlight cable ? i think i missed that point....
If you meant when disconnected, then 1:19
@@curiousjoe2410 but you did it in 2:20......
@@nirhawk he inserted it back
MULȚUMESC 😘
Thanks 😁
Nice video, do you know if this will work on hi boy s2 scooter also?
Same scooter, should work.
Hey nice video does this work for the aovo pro because my mudguard has just snapped 😭
joe, thank you very much for the informative video. that thing you do at 2:53, what is the size of the screwdriver/imbus? 3.5mm? i only have 3mm and 4mm, and i can't screw the thing off for the life of me.
Thanks 😁. You should use hex 4, if the bolt head is damaged you can try a torx to see if you can loosen the bolt.
@@curiousjoe2410 thank you for the quick reply. i tried with a 4 and a 3.5, but a 3.5 proved better. many thanks.
More video on the m365!!
As soon as I got the opportunity :)
Is it possible that i can install the support if i will also install a spacer on the screws?
Just try. I have not done it so can not tell.
is it necessary? i recieved my pro today and cable seems to be protected already
Congrats on the Pro! The cable is protected on the pro so it is not necessary but it also gives support for the mudguard.
Curious Joe thx a lot man gonna purchase some things today from your shop! is there a promo code for people who order 49€ 😜
😁
I didn't put it in the chims oh well it works
So I don't need to somehow put back the cable protector?
Minja Pavlovic the mudguard support has a built in cable protector
Just got mine delivered to Denmark. Too bad i didn't watch this video, before ordering this. What kind of silly engineering is that? How on earth you expect this plastic to be put in between the body and the bolt holding the wheel? these bolts must be properly torqued! it carries the wait of the rider, you shouldn't just torque it "easy" as shown on the video. I tightened mine with the same torque as it was from the factory, and expectedly the plastic got smashed... waste of money...
We have been riding with this for a year without any problem and we have had no reports from any users.
If you are not happy with the product just contact us via our website.
Can I know all the tools required
2.5mm hex
4mm hex
Phillips head screwdriver
Knife or small flat screwdriver to remove rubber covers and stickers
I believe that should be it.
Do you know what kind of screws were used for the mudguard ? I can’t use original ones as they are too short
Strange...The orginal has worked well for me. Just try to find any screw with same width but slightly longer.