Bitchin Cosmetiocs, I love it, but a few helpful tips and some info.... 1, I use ACC darts and foam, or ACC v5 Prototype foam and Pak D heads, much better for brass. 2. I know a lot of people don't understand why I cut a katana mag adapter down rather than a 3d printed unit, but what you showed in the vid is why exactly, the original adapter holds the mag at 1 point and puts no other external pressure on the mag, we designed it specifically that way for a reason, we knew it was going to be a mag within a mag and very tight in tollerances. It's not the follower, it's the magwell 3. My Kronomag, the first one ever built uses a 18.5 KG Longshot Turf spring, the spring is flat ground, cut down a coil and a half and I use a special copper spring plate to hold it in. With a 12" barrel it pulls 310-330 fps and ranges in excess of 200' flat. Long barrel is important for this one, because the Plunger tube volume is 72 cc's 2 cc's more than a stock kenner crossbow. K26 is good for rival, but for Stefan leaves much to be desired for short draw applications like a krono's where you need more precomp and exit pressures. Crbon fiber is a good idea, but the outer sheaths of my barrels are andonized 6061 Aluminum from Industrial Metal Supplies in Sun Valley, CA.
Ok in 14 kg, try a century c 882 spring cut down to .95" solid legth. Use a turf longshot spring for the catch and youll have to trim the catch tab to be thinner to fit it. 8.5" in 14, 12 in 18 kg respectively
It looks even better in a video than on reddit! Also, i feel you on those katana mag followers here's hoping that they will be fixed aswell. I hope your channel grows Valour it's become one of my favorites.
I love this thing. You should make a pump grip for it and it would be a beastly compact little nightmare. I also just picked up a few hundred yellow gen 1 worker darts and I’ve been shooting heads off left and right. Same thing has been happening with my accufakes from out of darts and my ACC Gen 3s from blaster tech though. I’m wondering if these are all made in the same factory or something because they all seem to have that same sort of thin but brittle and hard glue on them.
I was thinking that similar to the Magnus shotgun kit someone should make one for the Kronos and with your design skills I know it would look fantastic.
I talk about things similar to this (making other single shots take mags) and I get told go buy a retaliator.... This looks better than I ever could make anything...
Im Bad in breeching and stuff like that. BUT I WANT THIS THING !!!!!!!!!!!!! for How much would you Build a 200+ fps kronomag for me ? (I cant Afford too much)
This channel gives me Captain Xavier vibes who else the way he talks reminds me of him
for the love of god, please put the barrel files on thingiverse
wil mclock he’s not going to
It looks similar to a tec-9 with a futuristic look once you put a mag in it
just has to be semi auto and yes
You know I love it. If I can get my hands on a spare kronos I have to try and build one of my own now. It looks like fun to play with.
Bitchin Cosmetiocs, I love it, but a few helpful tips and some info....
1, I use ACC darts and foam, or ACC v5 Prototype foam and Pak D heads, much better for brass.
2. I know a lot of people don't understand why I cut a katana mag adapter down rather than a 3d printed unit, but what you showed in the vid is why exactly, the original adapter holds the mag at 1 point and puts no other external pressure on the mag, we designed it specifically that way for a reason, we knew it was going to be a mag within a mag and very tight in tollerances. It's not the follower, it's the magwell
3. My Kronomag, the first one ever built uses a 18.5 KG Longshot Turf spring, the spring is flat ground, cut down a coil and a half and I use a special copper spring plate to hold it in. With a 12" barrel it pulls 310-330 fps and ranges in excess of 200' flat. Long barrel is important for this one, because the Plunger tube volume is 72 cc's 2 cc's more than a stock kenner crossbow. K26 is good for rival, but for Stefan leaves much to be desired for short draw applications like a krono's where you need more precomp and exit pressures. Crbon fiber is a good idea, but the outer sheaths of my barrels are andonized 6061 Aluminum from Industrial Metal Supplies in Sun Valley, CA.
Chris Scaramanga Cartaya I'll definitely take this into consideration. What length of barrel do you suggest?
Ok in 14 kg, try a century c 882 spring cut down to .95" solid legth. Use a turf longshot spring for the catch and youll have to trim the catch tab to be thinner to fit it. 8.5" in 14, 12 in 18 kg respectively
The blue and gold is just beautiful. I love it.
this is cool as heck to see in war, and Big Blue is a good name for it.
It looks even better in a video than on reddit! Also, i feel you on those katana mag followers here's hoping that they will be fixed aswell. I hope your channel grows Valour it's become one of my favorites.
I love this thing. You should make a pump grip for it and it would be a beastly compact little nightmare.
I also just picked up a few hundred yellow gen 1 worker darts and I’ve been shooting heads off left and right. Same thing has been happening with my accufakes from out of darts and my ACC Gen 3s from blaster tech though. I’m wondering if these are all made in the same factory or something because they all seem to have that same sort of thin but brittle and hard glue on them.
Great way to continue the lines of the blaster. Great vid as usual. TkEZ»UK
I'm not normally an aesthetics guy but that looks Nice!
the worker yellow darts has problem with the glue recently and they are working on it
Are there files for the barrel?
That barrel shroud is really cool! Will you ever release fuels for sale or no?
Looks just like what I expect from you. Really, really high quality cool.
Where can I get that barrel ?
Looks beautiful. I'm having the same problems with my worker heads. What spring load is in there?
OC Nerf just a length of k26. I could possibly get a little more punch out of a slightly longer barrel. I have plans for a 14kg Magnum though
What would it take to do the same barrel shroud. Then a pump grip integration so it's a mini Longshot powerhouse!
I covered my brass with a pump kit
Widen the follower channel or make the follower smaller? Either way love the gun and color!
I'm interested in purchasing the 3D printed barrel shroud. where can I purchase the barrel shroud at?
Looks awesome can't wait to try it
looks clean. big fan of the paint job.
Almost looks like a miniaturized futuristic Tommy Gun
Hello Mr. Valor I've been looking for a mod guide on making a kronomagnum and I can't find one. If you could do that it would be pretty cool.🙂
needs a JSPB Urban Ops Like Folding Stock.. than its Perfect.
Beautiful man. Great work.
Is there anyway you could suggest spray paint of a similar colour?
HJ TV check your local auto parts store. I think I saw a similar blue at some point
It looks epic!
Name of blue paint??
HJ TV I honestly forget at this point. It's one of my airbrush colors
I was thinking that similar to the Magnus shotgun kit someone should make one for the Kronos and with your design skills I know it would look fantastic.
The barrel you use is a nerf barrel or a modded barrel ?
Driss Bertino custom designed and printed by me
where can I by this?
i'm not open for commission at the moment
I talk about things similar to this (making other single shots take mags) and I get told go buy a retaliator.... This looks better than I ever could make anything...
use an k14 spring
Fantabulous build!
homelee665, hi i subbed to ur channel if u dont know im actually genji 411 hehe
Im Bad in breeching and stuff like that. BUT I WANT THIS THING !!!!!!!!!!!!! for How much would you Build a 200+ fps kronomag for me ? (I cant Afford too much)
awesome!!!!
please put barrel shroud on thingiverse! I have all other components
Chris cartaya already did an XZues 2, called big blue! Lovely build though, wait for JarekRedragons video on his!
UA-cam search JarekRedragon!
So pretty 😍😍😍
Sweet.:]
Dude Where have you been! This is awesome if you ship to the UK I'll give you signed blank cheque name your price........
The Chef message my Facebook page. Shipping overseas is more expensive, but I will do it
So gorgeous