As an apprentice gunsmith I can’t even begin to tell you how much I value your channel. Wow! I’ve learned a lot from you and always look forward to the next video coming out. Keep up the awesome work!
That knucklehead. He's at minimum fair-to-middlin', and maybe even halfway decent. I don't think he knows it. I do know that he puts me in roughly the fourteenth sub-level of root cellar as a gunsmith, and I love his videos.
“I am an average gunsmith”. Nope, you sir, are a real craftsman. The time an expertise it took to do the work and figure out each issue is a real testament to who you are. All I can say is, THANK YOU, I really enjoy watching your videos!
The more I watch this guy the more I realize that not only is he brilliant he's more of an artist than anything. Not to take anything away from his incredible ability as a gunsmith, just the opposite.
A word to the wise: At the 28:22 point, when Mark put the link into the recoil spring, the link itself can/will wear itself in a way, to perfectly replicate a double-edge razor blade! I worked on an 1100 that was so sharp it cut three fingers in one fell swoop, two to the bone. Like Mark said, the grooves/shelves are extremely sharp as well. Be VERY careful when working with it (the part that looks like a tweezer). Another I worked on was similar to the first. I don't touch them without gloves on. Be safe everyone. Rev. D.
I'll second and third that, because I didn't learn the First Time! What's the deal with the Sportsman 12? Looks exactly the same but receiver is plain, no "engraving". Is everything interchangeable, partswise, or is anything particular to the Sportsman 12 that isn't interchangeable with an 1100? Manufactured @ '74 I think based on model 1100 numbering system pre '70 no letter prefix, L prefix 70 mnop etc. Great shape though, someone took awesome care of it.
I thoroughly enjoy every video you put out for us. I watched every minute. My father was much like you, except for the woodworking. He was an electrician, electric motor repairman, machinist, and welder. I chuckled to myself when you said you don't have to force whatever you were working on at the moment. Dad would get agitated with me when I'd be helping him at his shop, I can still hear him telling me you don't have to force it. When you've got it right it'll go together easily.
Just one caveat. Any drying oil. Any oxidizing oil. Linseed oil,teak oil,tung oil,when you use a cloth rag,stretch it out and let it fully oxidize. There are other safe disposal measures that also work just fine. But don't bunch it up,and red lead is unlikely to be available nowadays,but it makes the whole spontaneous combustion possibility worse. Lots of places have had fires by people not knowing just how hot a drying oil can get. Let it dry spread out and dispose safely. Terrific episode. And he's right about that there Chevy 350.
Tons of them here in Greece. Ever since they came out in 1962, every merchant marine or whoever had migrated to the U.S., would bring back preety much one for every relative. The 1100 and the Auto 5 also in big numbers, dominated the hunting grounds for more than half a century here. Many of both are still in use. I have seen them in all posible conditions, including no wood stain, cracked stocks-forearms, all blue replaced by silverish patina, and a rubber boot sole nailed in as a recoil pad. Still worked. At this moment there are 20 pieces for sale online, one in 20ga and one in 410, plus some extra barrels. I also saw one "Auto12", the budget 1100 version right before the 11-87 came out. IMHO, 1100 fell out of favor due to high marketing used by other manufacturers, and not because its obsolete. I like both, 1100 and 1187. Oh, superb video by the way!! Thank you!!!
Interesting trip down the rabbit hole and a excellent video as well hopefully there's more to come when the parts arive have a great day Mr Novak you keep posting and I'll keep watching
Mr. Novak, I want to thank you for making things easy to understand. You've given me the confidence to buy checkering tools and start practicing checkering. Thank you sir, You rock! I think you're one of the best and most skilled gunsmiths on the tube. Have a safe and very happy Independence Day sir. Hope the family all the best.
excellent educator you are the best i've seen in my 71 years anywhere , you also include in detail where you purchased and why you purchased the different materials selections you use during your repairs....many many thanks.....
I am from Portugal and i have an 11-96 Euro Lightweight, very similar system and i work on mine mainly because there are not a lot of gun smiths that work good with this system, they are not common guns (the 1100 family). I love mine, they are very soft shooting and very modular. Mine is converted to Practical Shooting. I have learned a lot with your video and i am very thankful that you did this video. Quick note: My grandfather won this shotgun on a raffle tiquet and gave it to me years latter because he doesn't hunt with it anymore. Keep up with the videos, you truly inspire people around the world. "The centered 10 Chanel"
It's been a pleasure watching this, Mark, because here in Australia, ordinary Citizens are not permitted to own such things as automatic shotguns, and it's great to be able to see the inside workings of things that we'd LIKE to own !!
Fantastic! Nearly 1 hour and 28 minutes of top quality entertainment and skills to start the 4th of July weekend! Thank you Mark and enjoy your weekend and be safe!
My dad had a 1100 back in the 70s and he took the trigger completely apart after being warned not to and messed something up. Next time he went hunting he said bird went up, he fired, and then all he saw was blue sky. It legit emptied all 3 rounds so quickly he was on the ground before the 2nd shell hit the deck. Took it to a gunsmith and said he put the sear in backwards and it slam fired.
I cut my skeet-teeth on an 1100 20 gauge back in the ‘80’s. My father had a matched set 28 gauge and .410, which we also used. I remember the annoyances of stripping and cleaning those pigs after a day’s rounds of skeet (usually followed by reloading the spent shells). We added an 1187 12 gauge later, but I always preferred 20 gauge. I eventually switched to an over-under SKB ultralight and never looked back. It was a pleasure seeing that pile of parts get a new life. One thing your explanation clarified for me was a how the bolt carrier interacts with the recoil spring. I once accidentally tripped the bolt release while the barrel wasn’t seated, which resulted in the mechanism becoming completely jammed. After some choice words, my father took the inoperable shotgun to a friend who set it right. I am guessing that the t-connector must have jumped out of the cup of the recoil spring follower. Thank you for clarifying that little mystery from my youth. I may have to see if I can find that old 20 gauge and put it back in the field.
Mark.. absolutely love your videos.. my dad is retired AF. hearing you're military "markisms" just reminds me of my dad, he has alot of the same ones. I grab a glass of whiskey and watch.. KEEP EM COMING
... I like and enjoy the longer videos... I wish you would consider doing more of them.... There is something to be said about seeing a project from start to finish, instead of fragmented over weeks... Great stuff Nick Thank you
Wow!! I really enjoyed this video. Great sounding gun. I don't know about Gunsmiths, a little about Machinists, Cabinet Makers, Jewelers, Masons, Painters, Welders, and Plumbers.Having a working knowledge of all of these crafts is above average IMO. Thank you for sharing, your content is truly engaging! The most important knowledge of all....Humility.
Hey guy your videos are second to none. I learn so much from you just talking to a camera. Thank you for sharing your experience and smithing style with all of us.
Great job Mark. I’ve owned three 1100’s over the years. Reliable soft shooters. The first was an SB Skeet. Had to sell it to my brother-in-law to pay some bills. Big mistake, next time I saw it, the toe of the stock had been busted off! Gorgeous fancy walnut……ah well, never sell a gun and think you might want it back!!!
My brother needed cash so he "sold" our grandfather's Remington bolt action 22 that our grandfather cherished and refinished for us to learn shooting on. He basically loaned it to his brother-in-law, the brother-in-law then was evicted from his apartment and the junk man that came to empty the apartment stole the rifle. 😐
You always make me smile while I learn. Thank you, Mark. Edit: I had a four-bolt 350 with 180,000 miles on it when I rebuilt it. The _only_ thing out of spec, other than a rounded over camshaft and new heads, was the oil clearance on the center main. .0005" out. I was happy with that.
I usually start these videos yelling at the screen when Mark does something wrong like not put the front tab of the shell stop inside the slot in the receiver before trying to stake it - but I always come around with full forgiveness as the video unfolds. Thank you, these videos really are a treasure.
Doing is 90% of the enjoyment of anything, It is obvious you enjoy working on firearms and also enjoy making the videos. That makes your videos especially enjoyable to watch. Keep up the great work. I have learned a lot so thanks for that also.
Mark and crew, thank you for putting in the hard work and hours to bring these videos to us. There isn't much else i get excited about other than the chance to hunt with my kids and a Mark Novak post. Hope you all had a wonderful independence day!
Mark, a couple of things that I have done different (not that it makes a difference) 1-When removing the stamped checkering, I first remove the finish and then using heat and steam method (the same as you) raise the "dents"' left by the stamping machine 2-When finishing the checkered area, I use a toothbrush to scrub the finish into the area Great project, thanks for sharing
One of the most interesting projects ever - so many issues, so many questions, so many solutions. And I don't care WHAT you say, there is nothing "average" about Mr Mark Novak!
Absolutely beautiful, I love the way you treat the wood on your weapons not like it's just something to hold it together but instead , part of an actual piece of art, because a finely assembled Gun is a piece of art that can be an amazing and enjoyable piece of equipment to use to go out and have fun with. Also be a sporting utensil like a football, or a hockey 🏒 stick . Or it can be a finely assembled and highly tuned and effective weapon to use with the precision of a hammer and chisel to carve the lines and curves as into a piece of stone; say as a piece of marble to create a piece of art like the thinking man or any other piece marble that DaVinci carved into to create his master pieces . It's all amazing to me. Well done Sir, well done .
Dear Mark ! Your videos are long but i enjoyed every minute of it,you go so much in detail how things are made and whats wrong and why it doesnt work.Keep doing a good work !
100 videos. Wow, what an accomplishment. When you first started this did you ever think someday you'd be this many videos in? Please keep 'em coming, we really like 'em.
Hi Mark, Hubertus from Germany, I‘m just sitting in China in quarantine and watch your videos. Awesome stuff you do. Yes I own 3 Remington 1100 and the number will grow as soon my wife looks the other side. Your PicStick is cool, too bad the German government regulates the mag content down to two rounds. This is why I hunt with a double rifle barrel Drilling. It goes boomboom and I reload below 2 seconds. I learn a lot from you and too bad you are not in Europe. Take care and enjoy your cigars.
Mark, I know you checked it but others may not. There is a bumper pad inserted at the back of the bolt which is called the Breach Bolt Buffer - part 14 in many exploded diagrams. The original ones look like a nylon and will turn to a blue tint and get brittle over time. The last 1100 I took apart had half of the bumper broken into gravel and was spread all through the lock/trigger mechanism. Always check the bolt buffer on any old 1100 and replace as necessary.
Folks like this gentleman are worth every penny they charge for their expertise. Regular schmoes have no idea what these guys know and do, including me. Excellent video and repair.
This is the type of gunsmith I wish I could apprentice under. This is the type of work that is falling out of the trade and now it's nothing but kids coming out of gunsmithing school knowing how to rebuild imported ak parts kits and how to assemble ar's like a factory, how to build glocks and Remington 870s and 1100s. But not knowing how to fix any of them that say have a head space gap or has an out of tune gas system, just any problem that needs any technical knowledge and they're screwed. I've bought a lot of the tools myself and have UA-cam'd most of my problems. My local shop is notorious for saying "ahh I've seen this before it's your barrel, the round isn't seating properly so that's why your rounds arn't chambering, all you need is a new barrel and we have them in stock. They cost a little more than some of the online places but we'll install it for a discounted price"🤔🤔🤔😂😂 you read that right, I've heard that same remark from the same 22 year old fresh from gunsmith school 5 times (I help the old man that ownes the gun shop) I've tried teaching him a few things hear and there but you know how kids that age are.
I have several old guns that I am taking care of maintaining and conserving. Encouraged by your videos. My Cutts gun is a REM m11. The young guys at the gun store didn’t know what to think. Several thought it was some antique suppressor. That’s a crazy purpose built gun you have there. Will turn heads for sure.
been teaching myself checkering and watching you blast that pattern through answered a lot of my questions on what is to screwed up and what is actually possible. Pattern depth was a question for me as well. Just watching you work and talking your way through the process is priceless for guys like me. Thank you
A late local gunsmith was converting 3” 1100’s to run light loads. Opened up the gas ports. I’ve had a lot of the guns he did that way come through my shop. They worked fine with 2-3/4” light loads, but when the owners used 3” ammo they started coming apart. I was seeing a rash of them come in with broken action bars after he passed.
I've got a 1970 Remington 1100 that I bought used from Coast to Coast when I was in high school. It was originally owned by my family doctor and has been meticulously maintained over the years. Runs like a top. However, its the only firearm that I ever really hated working on. I turned it into a three-gun rig 20 years ago and installed an extended carrier release. I found out the hard way that the edges in the receivers are razor sharp. I made the mistake of running my finger down on of the grooves and it sliced me good... twice... because I am a slow learner.
Me: Watching the video, wandering, " Gee, how do you fix pressed in checkering?" Mark, 10 seconds later: Breaks out cabinet rasp . Me: Well that answers that.
I have a number of guns I have very little money in but they have "issues". Your videos are helping me to have the confidence to tackle a couple. Thank you!
We inherited a 20 gauge 1100 with a Cutts from my pappy. My uncle speculates that a lot of the Cutts conversions were done after a hunter accidently got some dirt/mud in the barrel and blew out the muzzle end.... Looks cool, but not as much as a Thompson or 1918 BAR with the Cutts.
Great video, always a lesson or 10 to be learned watching these. I looked at the length of the show, got a good chair, a coffee and settled in to "go down the rabbit hole !!"
I built an 1100 I bought used in the early 80s for IPSIC with the Hastings barrel , drilled my own comp holes in the barrel and the 10 shot magazine , and it shoot all the variable loads needed for every course for some yrs. Well 5 yrs. ago had a fire , it didn't get very hot , but the smoke damage is bad . Same place / fire , took the crome off my Snap On Tools . Haven't got started in the rebuild yet . Your video is helping to gain some momentum to make a good gun again . Thanks
Good luck with the post-fire rebuild. I lit my kitchen on fire a few yrs ago with some oil, getting the soot off of everything afterwards was the worst part. Firefighter dad gave me a tip for the proper cleaning agents, made it a whole lot easier. You need some angry solvents to get rid of all the small carbon particulates. The stuff I used had the brand name "Hydrosol" and is apparently produced in a small factory in Denmark, maybe you could find a local equivalent. Highly basic cleaner, pH of 10 preferred, works best for soot
@@MortenErCrazy I wounder if you miss spelled what you were thinking about , I look up " Hydrolsol " is distillation of oils from plant matter ? Starting with that search , I found Hydroxyl ? Thanks
@@KD0CAC Ah, the word has a different meaning in English, sorry - If you google "hydrosol grundrengøring" you should be able to find the product, white jug with a blue cap. Not sure if you can find a vendor though
@@KD0CAC Welcome to EU, lol.. VAT is extra 25% tax, if your purchase is more than 12 bucks that happens. 5 liters should last a long time though, it's concentrated, mix with water, 5-10% by volume :) Edit: As for shipping, i see no problems besides weight - I don't think it's a controlled substance of any kind
glad i stumbled into your channel, i have shared you with my friends who are into metal work, wood word, gun work , and small business guys. your attention to detail is impressive.
Thank you for making this knowledge available to average people. It gives me plenty of ideals to try things I would have never otherwise thought of, that I think I could confidently screw up over time and eventually do something passable.
I have had 2 Gm trucks with 400,000 miles + between the two. I believe there is art in function, so to me making ye ol pig stick function is a work of art. Well done sir
Mark, you're not average. In my opinion, you've worked very hard and long to develop these skills. And thank you, about twenty years ago I tried to cut the checkering on an 1100. It didn't work. I thought I was the problem. I enjoyed you bringing this gun back to useful life.
This is great! I love your work. My boss heard that I restored my old Mosin-Nagant and asked me if I could fix up his old break-action 12ga. Someone had put modern rounds through it and split the stock in several places, and he didn't even know the receiver was bulged and blown out. It's a wall hanger now.
What a great and informative video, thank you for persevering in recording all of the steps and progress made with this project. The knowledge you are passing on to those to everyone is very much appreciated by myself and I'm sure many other gunsmith enthusiast. You really went Into a lot of detail to explain the "how's, why's, and what's" questions almost as soon as they popped in my head. I also favor the more reddish, dark look myself. This is really turning out to be a beautiful piece of custom artwork in my opinion. I'm sure that everywhere you go with this, you'll wind up spending more time answering questions with little time left to do what you came to do in the first place. LoL. I'm sure it wouldn't bother you too much, I know for sure, it would be my pleasure to answer every single one, if the roles were reversed. It is something to be proud of and a lot of time and effort were put in to make it this way. I enjoy custom items when there are only limited to one or a handful at best, and could be as simple as a toothpick holder. Knowing that I have an item that is the only one in existence that looks, feels, and functions as it is, really makes one to appreciate everything that went into the completion of it that much more. In this realm of craftsmanship, often times, no monetary value can ever be assigned to such items because the value it brings their creator or owner is not able to be measured in any other form, which makes it invaluable. Thank you all for your time and effort put into making these videos educational and enjoyable. Cheers
Thanks to the UA-cam algorithm your channel came up in my list and I am extremely glad it did! Watching and listening to you as you go through your process and seeing the incredible final outcome on the firearm is extraordinary. I have shared your video with some younger people i know to show them what it really takes to make something work that they can be proud of. Thank you for the time and effort you put into your videos and I’ll be watching for the next one!
Hi, I am from England, UK. I have had an 1100 for nearly forty years. I started shooting clays with it but its now my live pigeon gun. Its a great tool and I can hit everything with it. Thanks for this episode, it has helped me with some little issues with my 1100.
@@marknovak8255 Add a under barrel grenade launcher while you are at it ! You never know when those wild hogs will bunker up ! Oh and custom made tungsten core armor penetrating slugs are a must ,those nasty armored pigs are just around the corner.
Live in Northern Ireland and had a 1187 and later a 870 for wildfowling for many years neither gave me any bother or went wrong, biggest mistake i think most gun owners make is not properly cleaning there gun after use. My grandfather was a old army sergeant and in civilian life a Gamekeeper and when teaching me to shoot made sure I knew how to keep any firearm spotless.
Silver solder is unreal STRONG. Your such a pro. I've silver soldered copper medical oxygen lines on hospital construction sites. Its real strong to hold an optic rail on a Firearm and keep the scope there forever.
I watched the whole video 🤷 never shot a gun in my life nor do I own any, no engineering qualifications either but I really enjoyed watching a professional at work 👍
The sheer wealth of knowledge a good gunsmith carries around usually goes unseen. Mark gives you an idea of just how the sausage is made, and you don't get that from seeing a finished product
Im a Remington man through and through, there is no better Hunting Rifle either for Left or Right handers than the Remington pumps, Ive got 141's, 760's and 7600's and ive been using my 760 since i was 12 and im now 36, these Remington pumps just cant be beat, and that goes for the 870's and 1100's as well!
On the seeing of 1100's in europe: I have, in Holland one of my friends had one. He had more problems with it than me with my auto 5. Love your work and content.
@ 47.xx, A great product from Brownell's is Comet flux. It is perfect for a job like this. You can take a Q tip and just paint the area of the 'solder box' on the barrel. You just want the Q tip damp with comet flux so it doesn't run. It takes very little. You just heat it up and melt solder on it. The solder will stick perfectly and leave a thin, even tinning where the comet flux was applied and any excess solder will just drip off the barrel without sticking. I use 'non-fluxed' silver solder for this, so it only sticks to the comet fluxed area. Tin the mount and assemble exactly the same as you did here. I'm not saying it's better or anything. It just makes that job super easy and there's practically no solder clean up afterwards. You can even do this with some of Brownell's Heat stop paste (around the outside of the box) and solder parts without messing up surrounding bluing. That doesn't apply here but is handy on a firearm that isn't being refinished. I hope this comes in handy. Great video! Take Care and be safe, John
@@troopcom I put the 18” Remington barrel on it. I added a 2 shell extension and changed out the shell lifter button from the regular to the longer police/tactical version. Added a synthetic pistol grip stock and front grip and an oversized safety button and the oversized tactical bolt handle.
Not gonna lie, I really like this thing mark. Has kind of a steam punk or WWI aesthetic to it, but also looks like it will be fun and functional in the end. Just an all round neat build I'd love to have!
There may be better gunsmiths Mark, but I've yet to see one with your spiritual patience, and calm demeanor.. And thats what makes a marksman, out of a shooter.
Beautiful Mark. I hope you show off the final piece when its done. Very interesting seeing the pieces of deep dive. Looks like a fun arm to go mess around with.
Could not turn away from your video restoring your 1100. Wow, you are the teacher and I gleaned every word. Learned a bunch on what and what not to do on restoration. You have not gathered this knowledge overnight for sure. A lifetime would be the right word. Thank you Mark for taking the time in making this video and showing us master craftsmen ship. Blessings and a long life.
As an apprentice gunsmith I can’t even begin to tell you how much I value your channel. Wow! I’ve learned a lot from you and always look forward to the next video coming out. Keep up the awesome work!
Mark calls himself an "average" gunsmith, however, I believe a lot of "expert" gunsmiths wish they were as AVERAGE as Mark! 😂 Great Job Mark. 👍🏻
agreed 100%
That knucklehead. He's at minimum fair-to-middlin', and maybe even halfway decent. I don't think he knows it. I do know that he puts me in roughly the fourteenth sub-level of root cellar as a gunsmith, and I love his videos.
If Mark is just "average," then I probably shouldn't be allowed near hand tools.
I agree
Yes average by his standards .master tech first class in my humble opinion .
“I am an average gunsmith”. Nope, you sir, are a real craftsman. The time an expertise it took to do the work and figure out each issue is a real testament to who you are. All I can say is, THANK YOU, I really enjoy watching your videos!
yeah - its called doing shit properly. the mark of a genuine craftsman
"I'm an average gunsmith..."
Bullshit. Mark, you're OUTSTANDING!
The length and pacing of this video is perfect for me, great work my dudes!
The more I watch this guy the more I realize that not only is he brilliant he's more of an artist than anything. Not to take anything away from his incredible ability as a gunsmith, just the opposite.
After one hour twenty seven minutes and forty two seconds I found myself disappointed that the video had come to an end. Awesome video y'all!
A word to the wise: At the 28:22 point, when Mark put the link into the recoil spring, the link itself can/will wear itself in a way, to perfectly replicate a double-edge razor blade! I worked on an 1100 that was so sharp it cut three fingers in one fell swoop, two to the bone. Like Mark said, the grooves/shelves are extremely sharp as well. Be VERY careful when working with it (the part that looks like a tweezer). Another I worked on was similar to the first. I don't touch them without gloves on. Be safe everyone. Rev. D.
You guys should shoot some video.....really mean that. We need more voices out here in the wilderness
I tended to put gloves on when working with 870 receivers for the same reason.
I'll second and third that, because I didn't learn the First Time! What's the deal with the Sportsman 12? Looks exactly the same but receiver is plain, no "engraving". Is everything interchangeable, partswise, or is anything particular to the Sportsman 12 that isn't interchangeable with an 1100? Manufactured @ '74 I think based on model 1100 numbering system pre '70 no letter prefix, L prefix 70 mnop etc. Great shape though, someone took awesome care of it.
@@marknovak8255 What's that doo hickey tool you use to make the checkering called? I'm always looking for a reason to buy new tools. Thanks
I thoroughly enjoy every video you put out for us. I watched every minute. My father was much like you, except for the woodworking. He was an electrician, electric motor repairman, machinist, and welder. I chuckled to myself when you said you don't have to force whatever you were working on at the moment. Dad would get agitated with me when I'd be helping him at his shop, I can still hear him telling me you don't have to force it. When you've got it right it'll go together easily.
Just one caveat. Any drying oil. Any oxidizing oil. Linseed oil,teak oil,tung oil,when you use a cloth rag,stretch it out and let it fully oxidize. There are other safe disposal measures that also work just fine. But don't bunch it up,and red lead is unlikely to be available nowadays,but it makes the whole spontaneous combustion possibility worse.
Lots of places have had fires by people not knowing just how hot a drying oil can get. Let it dry spread out and dispose safely.
Terrific episode. And he's right about that there Chevy 350.
Tons of them here in Greece. Ever since they came out in 1962, every merchant marine or whoever had migrated to the U.S., would bring back preety much one for every relative. The 1100 and the Auto 5 also in big numbers, dominated the hunting grounds for more than half a century here. Many of both are still in use. I have seen them in all posible conditions, including no wood stain, cracked stocks-forearms, all blue replaced by silverish patina, and a rubber boot sole nailed in as a recoil pad. Still worked. At this moment there are 20 pieces for sale online, one in 20ga and one in 410, plus some extra barrels. I also saw one "Auto12", the budget 1100 version right before the 11-87 came out. IMHO, 1100 fell out of favor due to high marketing used by other manufacturers, and not because its obsolete. I like both, 1100 and 1187.
Oh, superb video by the way!! Thank you!!!
This is the best gunsmithing channel handsdown!
Interesting trip down the rabbit hole and a excellent video as well hopefully there's more to come when the parts arive have a great day Mr Novak you keep posting and I'll keep watching
Mr. Novak, I want to thank you for making things easy to understand. You've given me the confidence to buy checkering tools and start practicing checkering.
Thank you sir,
You rock!
I think you're one of the best and most skilled gunsmiths on the tube.
Have a safe and very happy Independence Day sir. Hope the family all the best.
Tool handles are cheap. Axe hafts, etc. So when you screw something up (you're learning, it's *going* to happen) you aren't out any serious money.
This might be my favorite project of yours yet. Awesome work.
I know it was my favorite
excellent educator you are the best i've seen in my 71 years anywhere , you also include in detail where you purchased and why you purchased the different materials selections you use during your repairs....many many thanks.....
Outstanding Mark, as per usual. Hope you’re on the mend. Really enjoy watching you do your thing.
I am from Portugal and i have an 11-96 Euro Lightweight, very similar system and i work on mine mainly because there are not a lot of gun smiths that work good with this system, they are not common guns (the 1100 family). I love mine, they are very soft shooting and very modular. Mine is converted to Practical Shooting. I have learned a lot with your video and i am very thankful that you did this video. Quick note: My grandfather won this shotgun on a raffle tiquet and gave it to me years latter because he doesn't hunt with it anymore. Keep up with the videos, you truly inspire people around the world.
"The centered 10 Chanel"
It's been a pleasure watching this, Mark, because here in Australia, ordinary Citizens are not permitted to own such things as automatic shotguns, and it's great to be able to see the inside workings of things that we'd LIKE to own !!
This is the kind if content that amazes me to see someone make something out of nothing
Cool. Guns
Fantastic! Nearly 1 hour and 28 minutes of top quality entertainment and skills to start the 4th of July weekend! Thank you Mark and enjoy your weekend and be safe!
My dad had a 1100 back in the 70s and he took the trigger completely apart after being warned not to and messed something up. Next time he went hunting he said bird went up, he fired, and then all he saw was blue sky. It legit emptied all 3 rounds so quickly he was on the ground before the 2nd shell hit the deck. Took it to a gunsmith and said he put the sear in backwards and it slam fired.
One of bidet s fully semi automatic ,bump stock magazine fed at 19 s ??????
I cut my skeet-teeth on an 1100 20 gauge back in the ‘80’s. My father had a matched set 28 gauge and .410, which we also used. I remember the annoyances of stripping and cleaning those pigs after a day’s rounds of skeet (usually followed by reloading the spent shells). We added an 1187 12 gauge later, but I always preferred 20 gauge. I eventually switched to an over-under SKB ultralight and never looked back.
It was a pleasure seeing that pile of parts get a new life. One thing your explanation clarified for me was a how the bolt carrier interacts with the recoil spring. I once accidentally tripped the bolt release while the barrel wasn’t seated, which resulted in the mechanism becoming completely jammed. After some choice words, my father took the inoperable shotgun to a friend who set it right. I am guessing that the t-connector must have jumped out of the cup of the recoil spring follower. Thank you for clarifying that little mystery from my youth.
I may have to see if I can find that old 20 gauge and put it back in the field.
Love these long videos. Thanks Mark for once again demonstrating your craft , and taking the time to document your work so we can all watch.
Mark.. absolutely love your videos.. my dad is retired AF. hearing you're military "markisms" just reminds me of my dad, he has alot of the same ones. I grab a glass of whiskey and watch.. KEEP EM COMING
... I like and enjoy the longer videos... I wish you would consider doing more of them.... There is something to be said about seeing a project from start to finish, instead of fragmented over weeks... Great stuff Nick Thank you
That was the quickest hour and a half I can remember. Thanks for spending the time to put this together and posting it.
I was recommended this by youtube, I said "Ah, what the heck I'll watch it" I was hooked, and didn't realized a 1 hr 1/2 passed.
@@D33Lux I know right, it's like a time warp😊
Wow!! I really enjoyed this video. Great sounding gun. I don't know about Gunsmiths, a little about Machinists, Cabinet Makers, Jewelers, Masons, Painters, Welders, and Plumbers.Having a working knowledge of all of these crafts is above average IMO. Thank you for sharing, your content is truly engaging! The most important knowledge of all....Humility.
Hey guy your videos are second to none. I learn so much from you just talking to a camera. Thank you for sharing your experience and smithing style with all of us.
The commentary left on the cutting floor has to be fantastic. Thank you Mark
over an hour was cut, but I made every point I wanted to make, no points were cut
Great job Mark. I’ve owned three 1100’s over the years. Reliable soft shooters. The first was an SB Skeet. Had to sell it to my brother-in-law to pay some bills. Big mistake, next time I saw it, the toe of the stock had been busted off! Gorgeous fancy walnut……ah well, never sell a gun and think you might want it back!!!
My brother needed cash so he "sold" our grandfather's Remington bolt action 22 that our grandfather cherished and refinished for us to learn shooting on. He basically loaned it to his brother-in-law, the brother-in-law then was evicted from his apartment and the junk man that came to empty the apartment stole the rifle. 😐
You always make me smile while I learn. Thank you, Mark.
Edit: I had a four-bolt 350 with 180,000 miles on it when I rebuilt it. The _only_ thing out of spec, other than a rounded over camshaft and new heads, was the oil clearance on the center main. .0005" out. I was happy with that.
I usually start these videos yelling at the screen when Mark does something wrong like not put the front tab of the shell stop inside the slot in the receiver before trying to stake it - but I always come around with full forgiveness as the video unfolds. Thank you, these videos really are a treasure.
Doing is 90% of the enjoyment of anything, It is obvious you enjoy working on firearms and also enjoy making the videos. That makes your videos especially enjoyable to watch. Keep up the great work. I have learned a lot so thanks for that also.
Mark and crew, thank you for putting in the hard work and hours to bring these videos to us. There isn't much else i get excited about other than the chance to hunt with my kids and a Mark Novak post. Hope you all had a wonderful independence day!
Mark, a couple of things that I have done different (not that it makes a difference)
1-When removing the stamped checkering, I first remove the finish and then using heat and steam method (the same as you) raise the "dents"' left by the stamping machine
2-When finishing the checkered area, I use a toothbrush to scrub the finish into the area
Great project, thanks for sharing
One of the most interesting projects ever - so many issues, so many questions, so many solutions. And I don't care WHAT you say, there is nothing "average" about Mr Mark Novak!
Man that’s the perfect color stain I’ve been searching for my entire life! Thanks a million
a genuine master at work
Absolutely beautiful, I love the way you treat the wood on your weapons not like it's just something to hold it together but instead , part of an actual piece of art, because a finely assembled Gun is a piece of art that can be an amazing and enjoyable piece of equipment to use to go out and have fun with. Also be a sporting utensil like a football, or a hockey 🏒 stick . Or it can be a finely assembled and highly tuned and effective weapon to use with the precision of a hammer and chisel to carve the lines and curves as into a piece of stone; say as a piece of marble to create a piece of art like the thinking man or any other piece marble that DaVinci carved into to create his master pieces . It's all amazing to me. Well done Sir, well done .
Dear Mark !
Your videos are long but i enjoyed every minute of it,you go so much in detail how things are made and whats wrong and why it doesnt work.Keep doing a good work !
100 videos. Wow, what an accomplishment. When you first started this did you ever think someday you'd be this many videos in? Please keep 'em coming, we really like 'em.
Mindbending, eh?
@@marknovak8255 I'm not surprised. I've watched from the start.
Hi Mark, Hubertus from Germany, I‘m just sitting in China in quarantine and watch your videos. Awesome stuff you do. Yes I own 3 Remington 1100 and the number will grow as soon my wife looks the other side. Your PicStick is cool, too bad the German government regulates the mag content down to two rounds. This is why I hunt with a double rifle barrel Drilling. It goes boomboom and I reload below 2 seconds. I learn a lot from you and too bad you are not in Europe. Take care and enjoy your cigars.
Glad you are enjoying our content. Good luck with the quarantine.
Mark, I know you checked it but others may not. There is a bumper pad inserted at the back of the bolt which is called the Breach Bolt Buffer - part 14 in many exploded diagrams. The original ones look like a nylon and will turn to a blue tint and get brittle over time. The last 1100 I took apart had half of the bumper broken into gravel and was spread all through the lock/trigger mechanism. Always check the bolt buffer on any old 1100 and replace as necessary.
Detritus.. Well Done!. Great vocabulary and top drawer craftsman skills. A pleasure to watch
Folks like this gentleman are worth every penny they charge for their expertise. Regular schmoes have no idea what these guys know and do, including me. Excellent video and repair.
To call yourself an average Gunsmith is the understatement of the century. Thank you for everything you do, it is greatly appreciated.
This is the type of gunsmith I wish I could apprentice under. This is the type of work that is falling out of the trade and now it's nothing but kids coming out of gunsmithing school knowing how to rebuild imported ak parts kits and how to assemble ar's like a factory, how to build glocks and Remington 870s and 1100s. But not knowing how to fix any of them that say have a head space gap or has an out of tune gas system, just any problem that needs any technical knowledge and they're screwed. I've bought a lot of the tools myself and have UA-cam'd most of my problems. My local shop is notorious for saying "ahh I've seen this before it's your barrel, the round isn't seating properly so that's why your rounds arn't chambering, all you need is a new barrel and we have them in stock. They cost a little more than some of the online places but we'll install it for a discounted price"🤔🤔🤔😂😂 you read that right, I've heard that same remark from the same 22 year old fresh from gunsmith school 5 times (I help the old man that ownes the gun shop) I've tried teaching him a few things hear and there but you know how kids that age are.
I have several old guns that I am taking care of maintaining and conserving. Encouraged by your videos. My Cutts gun is a REM m11. The young guys at the gun store didn’t know what to think. Several thought it was some antique suppressor. That’s a crazy purpose built gun you have there. Will turn heads for sure.
That thing looks amazing thanks for the hardwork to make this video, i enjoyed every second of it :D
been teaching myself checkering and watching you blast that pattern through answered a lot of my questions on what is to screwed up and what is actually possible. Pattern depth was a question for me as well. Just watching you work and talking your way through the process is priceless for guys like me. Thank you
Glad I could help. It's why we make the videos after all....
A late local gunsmith was converting 3” 1100’s to run light loads. Opened up the gas ports. I’ve had a lot of the guns he did that way come through my shop. They worked fine with 2-3/4” light loads, but when the owners used 3” ammo they started coming apart. I was seeing a rash of them come in with broken action bars after he passed.
Yep...I won't do that mod precisely because future owners aren't in on the secret
I've got a 1970 Remington 1100 that I bought used from Coast to Coast when I was in high school. It was originally owned by my family doctor and has been meticulously maintained over the years. Runs like a top.
However, its the only firearm that I ever really hated working on. I turned it into a three-gun rig 20 years ago and installed an extended carrier release. I found out the hard way that the edges in the receivers are razor sharp. I made the mistake of running my finger down on of the grooves and it sliced me good... twice... because I am a slow learner.
the first time is an accident, the second time is a lesson, the third time is stupidity.
Me: Watching the video, wandering, " Gee, how do you fix pressed in checkering?"
Mark, 10 seconds later: Breaks out cabinet rasp .
Me: Well that answers that.
I have a number of guns I have very little money in but they have "issues". Your videos are helping me to have the confidence to tackle a couple. Thank you!
This was great. Sounds like a massive amount of time and effort went into this. Just wanted to comment to say that we appreciate it.
We inherited a 20 gauge 1100 with a Cutts from my pappy. My uncle speculates that a lot of the Cutts conversions were done after a hunter accidently got some dirt/mud in the barrel and blew out the muzzle end....
Looks cool, but not as much as a Thompson or 1918 BAR with the Cutts.
"Tommy gun with a Cutts......" yeah buddy
I just love the detailed explanation we get. Mark is an amazing smith.
he is okay
@@Sssssssht You must be an awsome gun smith.
I've missed these long form Anvil videos. For a pig, she looks good!
You are far beyond "Average" bud.
That 1100 project is smashing.
12ga. X 10 + scoped hastings slug bbl.
Brilliant!
Average gunsmith my ass. Sir, the knowledge base you have is nothing short of incredible.
Well done master gunsmith Mark
Really needed the instructions on soldering a firearm
Great video, always a lesson or 10 to be learned watching these. I looked at the length of the show, got a good chair, a coffee and settled in to "go down the rabbit hole !!"
I don't believe for a minute, that you are a "average" gunsmith.
Very interesting Video. Thanks .
Yes, an hour and twentyseven mins. of ANVIL. MAKE MY MORNING.
Absolutely Outstanding Video! Thank you Mark & Bruno. Really good to see the whole thing in one hit. And no, it wasn't too long.
I built an 1100 I bought used in the early 80s for IPSIC with the Hastings barrel , drilled my own comp holes in the barrel and the 10 shot magazine , and it shoot all the variable loads needed for every course for some yrs.
Well 5 yrs. ago had a fire , it didn't get very hot , but the smoke damage is bad .
Same place / fire , took the crome off my Snap On Tools .
Haven't got started in the rebuild yet .
Your video is helping to gain some momentum to make a good gun again .
Thanks
Good luck with the post-fire rebuild. I lit my kitchen on fire a few yrs ago with some oil, getting the soot off of everything afterwards was the worst part. Firefighter dad gave me a tip for the proper cleaning agents, made it a whole lot easier. You need some angry solvents to get rid of all the small carbon particulates. The stuff I used had the brand name "Hydrosol" and is apparently produced in a small factory in Denmark, maybe you could find a local equivalent. Highly basic cleaner, pH of 10 preferred, works best for soot
@@MortenErCrazy I wounder if you miss spelled what you were thinking about , I look up " Hydrolsol " is distillation of oils from plant matter ?
Starting with that search , I found Hydroxyl ?
Thanks
@@KD0CAC Ah, the word has a different meaning in English, sorry - If you google "hydrosol grundrengøring" you should be able to find the product, white jug with a blue cap. Not sure if you can find a vendor though
@@MortenErCrazy Ok found some $24.74 for 5 liters , not sure about shipping or VAT ?
@@KD0CAC Welcome to EU, lol.. VAT is extra 25% tax, if your purchase is more than 12 bucks that happens. 5 liters should last a long time though, it's concentrated, mix with water, 5-10% by volume :)
Edit: As for shipping, i see no problems besides weight - I don't think it's a controlled substance of any kind
glad i stumbled into your channel, i have shared you with my friends who are into metal work, wood word, gun work , and small business guys. your attention to detail is impressive.
Thank you for making this knowledge available to average people. It gives me plenty of ideals to try things I would have never otherwise thought of, that I think I could confidently screw up over time and eventually do something passable.
I have had 2 Gm trucks with 400,000 miles + between the two. I believe there is art in function, so to me making ye ol pig stick function is a work of art. Well done sir
Mark, you're not average. In my opinion, you've worked very hard and long to develop these skills. And thank you, about twenty years ago I tried to cut the checkering on an 1100. It didn't work. I thought I was the problem. I enjoyed you bringing this gun back to useful life.
This is great! I love your work. My boss heard that I restored my old Mosin-Nagant and asked me if I could fix up his old break-action 12ga. Someone had put modern rounds through it and split the stock in several places, and he didn't even know the receiver was bulged and blown out. It's a wall hanger now.
Amazing to see a pile of parts become something awesome. Mark, you are truly talented.
Absolutely outstanding video. Thank you for your time and insight. We are lucky that you choose to share your knowledge. Thank you Mr.Novak.
What a great and informative video, thank you for persevering in recording all of the steps and progress made with this project. The knowledge you are passing on to those to everyone is very much appreciated by myself and I'm sure many other gunsmith enthusiast. You really went Into a lot of detail to explain the "how's, why's, and what's" questions almost as soon as they popped in my head. I also favor the more reddish, dark look myself. This is really turning out to be a beautiful piece of custom artwork in my opinion. I'm sure that everywhere you go with this, you'll wind up spending more time answering questions with little time left to do what you came to do in the first place. LoL. I'm sure it wouldn't bother you too much, I know for sure, it would be my pleasure to answer every single one, if the roles were reversed. It is something to be proud of and a lot of time and effort were put in to make it this way. I enjoy custom items when there are only limited to one or a handful at best, and could be as simple as a toothpick holder. Knowing that I have an item that is the only one in existence that looks, feels, and functions as it is, really makes one to appreciate everything that went into the completion of it that much more. In this realm of craftsmanship, often times, no monetary value can ever be assigned to such items because the value it brings their creator or owner is not able to be measured in any other form, which makes it invaluable. Thank you all for your time and effort put into making these videos educational and enjoyable. Cheers
Thanks, much appreciated
Thanks to the UA-cam algorithm your channel came up in my list and I am extremely glad it did! Watching and listening to you as you go through your process and seeing the incredible final outcome on the firearm is extraordinary. I have shared your video with some younger people i know to show them what it really takes to make something work that they can be proud of. Thank you for the time and effort you put into your videos and I’ll be watching for the next one!
Thoroughly enjoyed watching you restoring this 1100 , taught me a lot, manythanks from SW Wales 🏴🏴☠️👍🏼👍🏼👍🏼
Thank you very much for the time and effort you put into this video. I truly appreciate it!
Don’t know much about guns, but the way this man explains about everything and the knowledge in his words, I can’t get tired listening
Hi, I am from England, UK. I have had an 1100 for nearly forty years. I started shooting clays with it but its now my live pigeon gun. Its a great tool and I can hit everything with it. Thanks for this episode, it has helped me with some little issues with my 1100.
It's missing a bayonet lug for ad hoc boar-spear defensive actions
That was brought up.....
@@marknovak8255 Add a under barrel grenade launcher while you are at it ! You never know when those wild hogs will bunker up ! Oh and custom made tungsten core armor penetrating slugs are a must ,those nasty armored pigs are just around the corner.
@@marknovak8255 🤣 And don’t forget to add the ‘U.S.A. Today Chainsaw Attachment’ too!
A little bayonet never hurt anybody.
@@dangvorbei5304 A big one though, that might do the trick
Live in Northern Ireland and had a 1187 and later a 870 for wildfowling for many years neither gave me any bother or went wrong, biggest mistake i think most gun owners make is not properly cleaning there gun after use. My grandfather was a old army sergeant and in civilian life a Gamekeeper and when teaching me to shoot made sure I knew how to keep any firearm spotless.
A good sergeant ALWAYS keeps his weapon clean and ready. (Not BS armory clean, but always ready to fire and not bind up from dirt clean!)
It's good to see a real Craftsman at work! Good video, stay healthy my friend!
Silver solder is unreal STRONG. Your such a pro. I've silver soldered copper medical oxygen lines on hospital construction sites. Its real strong to hold an optic rail on a Firearm and keep the scope there forever.
You may act humble, you f amazing man. You keep it real and what could go wrong even for you . Thank you for your time and help.
"Beauty is in the eye of the beer-holder"
Lmao never change Mark
I watched the whole video 🤷 never shot a gun in my life nor do I own any, no engineering qualifications either but I really enjoyed watching a professional at work 👍
The sheer wealth of knowledge a good gunsmith carries around usually goes unseen. Mark gives you an idea of just how the sausage is made, and you don't get that from seeing a finished product
@@dangvorbei5304 totally agree, his delivery is really accessible as well 👍
Thanks for entrusting me to enjoy the Anvil Pigstick and have an adventure or three with it! I'm elated! #anvilpigstick
That is an amazing piece of art. You are the gunsmith. The finish on that stock is beautiful.
The way you installed that interceptor first try gave me goosebumps.
Im a Remington man through and through, there is no better Hunting Rifle either for Left or Right handers than the Remington pumps, Ive got 141's, 760's and 7600's and ive been using my 760 since i was 12 and im now 36, these Remington pumps just cant be beat, and that goes for the 870's and 1100's as well!
On the seeing of 1100's in europe: I have, in Holland one of my friends had one. He had more problems with it than me with my auto 5. Love your work and content.
@ 47.xx, A great product from Brownell's is Comet flux. It is perfect for a job like this. You can take a Q tip and just paint the area of the 'solder box' on the barrel. You just want the Q tip damp with comet flux so it doesn't run. It takes very little. You just heat it up and melt solder on it. The solder will stick perfectly and leave a thin, even tinning where the comet flux was applied and any excess solder will just drip off the barrel without sticking. I use 'non-fluxed' silver solder for this, so it only sticks to the comet fluxed area. Tin the mount and assemble exactly the same as you did here. I'm not saying it's better or anything. It just makes that job super easy and there's practically no solder clean up afterwards.
You can even do this with some of Brownell's Heat stop paste (around the outside of the box) and solder parts without messing up surrounding bluing. That doesn't apply here but is handy on a firearm that isn't being refinished.
I hope this comes in handy.
Great video! Take Care and be safe, John
That's why it was mentioned in the video. Great stuff
@@marknovak8255 Sorry, I must have missed that. Good reason to watch the video again! Take Care, John
I rebuilt my Dad’s 1100 from a standard field model to a tactical model last year. They’re great guns. Nice job on this one! I like that compensator.
I’m thinking about doing the same to mine.
What barrel and mag extension did you use?
Did you change any other parts?
@@troopcom I put the 18” Remington barrel on it. I added a 2 shell extension and changed out the shell lifter button from the regular to the longer police/tactical version. Added a synthetic pistol grip stock and front grip and an oversized safety button and the oversized tactical bolt handle.
Fabulous video and project Mark. Thanks so much for your time spent to share. Tremendously entertaining…you are a natural teacher!
i will say sir,you are one hell of a gunsmith.
Beautiful outcome Mark. Really looks great. Love your work.
Not gonna lie, I really like this thing mark.
Has kind of a steam punk or WWI aesthetic to it, but also looks like it will be fun and functional in the end. Just an all round neat build I'd love to have!
I was going for the geezerpunk vibe, yes.............
@@marknovak8255 😆🤣😂
@@marknovak8255 Geezerpunk, I love it! That's what I'm calling that style from now on.
There may be better gunsmiths Mark, but I've yet to see one with your spiritual patience, and calm demeanor.. And thats what makes a marksman, out of a shooter.
Beautiful Mark. I hope you show off the final piece when its done. Very interesting seeing the pieces of deep dive. Looks like a fun arm to go mess around with.
Could not turn away from your video restoring your 1100. Wow, you are the teacher and I gleaned every word. Learned a bunch on what and what not to do on restoration. You have not gathered this knowledge overnight for sure. A lifetime would be the right word. Thank you Mark for taking the time in making this video and showing us master craftsmen ship. Blessings and a long life.