Brilliant and very informative video, just got one of these reels today :) will definitely consider changing mine in the future, thanks for sharing. Tight lines
For the line roller, u hv to place a metal shim between the 2 bearings. The 2 bearings must not come in contact with each other when they are rotating.
Unfortunatly i added the 2 bearings for the Roller just like you Said but it is too dangerous as the roller doesn’t spin as well as before, Tudor the roller 2 bearings next to each other’s is not a very good solution.
An other question please, did you use some plastic/teflon washer with the wormshaft back and front bearings ? I saw some other videos use plastic washer .. If yes, how many wahsers per bearing and what is their thickness ?? Thanks a lot for your time
Bonjour, quelqu'un à t'il déjà remplacer tous les bushing par des roulement et si oui cela fonctionne t'il vraiment bien et y' a t' il un réelle changement? Merci pour vos réponse.
hello guys great job. i can find bearings in my shop but i dont know how many bearings. i watch movie lot of time but my english is very bad. can you help me to find all part's is needed for this upgrade? thks very much
the wormshaft front and back it's 3×6×2.5, for the Oscillation will be 2×5×2.5, for the knob will be 4×9×4, 5×9×3and lastly the line roller 4×8×3 and 4×8×2 hopefully this helps.Inner Diameter×Outer Diameter×Thickness.
@@gulamgh did you manage to find the 4x8x2 bearing for line roller bearing ? It's impossible to find for me !! I looked for an 4x8x5 to replace the 2 bearings with one but unvailable neither .. only found 4x8x3 .. Line roller upgrade is the most important I guess
Hi when you change this plastic bushing to bearings your reel will have less friction making the reel smooth. It's an upgrade for better performance Of the reel.
Yes correct cause the other side of the knob the innner diameter and thickness is slightly different following the handle end when inserting into the knob.
@@ferenccsizma5455 for the wormshaft front and back it's 3×6×2.5, for the Oscillation will be 2×5×2.5, for the knob will be 4×9×4, 5×9×3and lastly the line roller 4×8×3 and 4×8×2 hopefully this helps.Inner Diameter×Outer Diameter×Thickness.
@@ianrycroft1523 Sorry no I got the miniature bearings from my local shop which I ask from my best friend 'Google'😁 Maybe you could try to survey within your local shop sure to have.
for the wormshaft front and back it's 3×6×2.5, for the Oscillation will be 2×5×2.5, for the knob will be 4×9×4, 5×9×3and lastly the line roller 4×8×3 and 4×8×2 hopefully this helps.Inner Diameter×Outer Diameter×Thickness.😁👍
@@gulamgh Hi GH. I have just replaced all of the bearings except for the line roller and handle knob bearings as mine is an XSC and the handle knob is slightly different. SMR62-ZZ OSCILLATION PAWL SMR63-ZZ X 3 WORM GEAR SMR128-ZZ PINION REAR S689-ZZ X 2 CRANK S6800-ZZ PINION FRONT I hope this helps buddy.
Hi since the pandemic a lot of shops closed so you have to do a bit of research at Google to look in SG miniature bearings.Visit to the shop ask for the sizes of stainless steel bearing. Or you can go on line to purchase these bearing . Hybrid bearings are a bit more expensive but its worthy.
@@gulamgh If you look on UA-cam, you will find several videos where they disassemble, for example, the Ultegra XTD reel, and you will see that unfortunately (cost-effectiveness) it is already used in several Shimano models!
@78gyuszi oh ok it's individual preference for me this reel is good enough it will be better with the mentioned upgrade. In my 50 years of fishing sometimes those expensive gears not even a bite but have seen those with the cheapest gear got the most fishes. :)
Brilliant and very informative video, just got one of these reels today :) will definitely consider changing mine in the future, thanks for sharing. Tight lines
Tq😁🙏
For the line roller, u hv to place a metal shim between the 2 bearings. The 2 bearings must not come in contact with each other when they are rotating.
Noted thank you for the advice.🙂
sorry in the line roller 1 is bearing( 4x3x4) and one is shim (4X3X2)? I didn't found the bering 4x3x2
Unfortunatly i added the 2 bearings for the Roller just like you Said but it is too dangerous as the roller doesn’t spin as well as before, Tudor the roller 2 bearings next to each other’s is not a very good solution.
An other question please, did you use some plastic/teflon washer with the wormshaft back and front bearings ? I saw some other videos use plastic washer ..
If yes, how many wahsers per bearing and what is their thickness ?? Thanks a lot for your time
I have used plastic washer for warmshaft, so thickness is 0.5
@@mmxcape thank you!!
I noticed when I changed the bearings instead of the original plastic ones, the reel turns less... is this normal ?
answer me please
Give us the size of bearing to put in the pick up
Great information, nice job.
where can I buy all the parts needed for the update?
Bonjour, quelqu'un à t'il déjà remplacer tous les bushing par des roulement et si oui cela fonctionne t'il vraiment bien et y' a t' il un réelle changement? Merci pour vos réponse.
hello guys great job. i can find bearings in my shop but i dont know how many bearings. i watch movie lot of time but my english is very bad. can you help me to find all part's is needed for this upgrade? thks very much
Great job, sir !
Thank You🙏
Thank You🙏
Can i oder all the bearing from u sir
Nice video. 👍
Thank you.
Hi, nice video. Where did you purchase the bearings? Thanks
Did you manage to get the 4x8x2 bearing for line roller ?
Yea aliexpress
@@Husamsawasv thanks I managed to find them, with dificulty !!
Not many sellers for that particular size indeed
Is this the same thing for 2020 ultegra xtd?
Well done, very educational video, keep it up.
Thank You.
sorry in the line roller 1 is bearing( 4x3x4) and one is shim (4X3X2)? I didn't found the bering 4x3x2
the wormshaft front and back it's 3×6×2.5, for the Oscillation will be 2×5×2.5, for the knob will be 4×9×4, 5×9×3and lastly the line roller 4×8×3 and 4×8×2 hopefully this helps.Inner Diameter×Outer Diameter×Thickness.
@@gulamgh did you manage to find the 4x8x2 bearing for line roller bearing ? It's impossible to find for me !! I looked for an 4x8x5 to replace the 2 bearings with one but unvailable neither .. only found 4x8x3 ..
Line roller upgrade is the most important I guess
Does anyone know the all bearing sizes for upgrade
Hi GH...im new in this. My question is, what you get with plastic upgrade? Tnx mate...
Hi when you change this plastic bushing to bearings your reel will have less friction making the reel smooth. It's an upgrade for better performance Of the reel.
@@gulamgh tnx a lot....and one more question, how can I make line lay to be parallel on spool, adding spacers? I got ultegra 14000 xsd.
@@dragutinjakob6479 Hi sorry I'm not the subject matter expert on this.😅
very informative Vid. Well done
Sorry for the late reply thank you for your support.
bro how i am to upgrade the bearing
Very helpful many thanks
Thank You😁
Hi,
So just to make sure, the handle takes 2 different size bearings ?
Just want to know for sure before ordering them ;-)
Yes correct cause the other side of the knob the innner diameter and thickness is slightly different following the handle end when inserting into the knob.
@@gulamgh
Okay, thanks !
Nice job!!!Can you please tell me the sizes of the new bearings?
Hi which 1.
All of them
@@ferenccsizma5455 for the wormshaft front and back it's 3×6×2.5, for the Oscillation will be 2×5×2.5, for the knob will be 4×9×4, 5×9×3and lastly the line roller 4×8×3 and 4×8×2 hopefully this helps.Inner Diameter×Outer Diameter×Thickness.
@@gulamgh do you sell the bearing conversion as a kit including any shims
@@ianrycroft1523 Sorry no I got the miniature bearings from my local shop which I ask from my best friend 'Google'😁 Maybe you could try to survey within your local shop sure to have.
Where did you buy this bearings and can you PLEASE give us part numbers or sizes...Thank you
for the wormshaft front and back it's 3×6×2.5, for the Oscillation will be 2×5×2.5, for the knob will be 4×9×4, 5×9×3and lastly the line roller 4×8×3 and 4×8×2 hopefully this helps.Inner Diameter×Outer Diameter×Thickness.😁👍
Hi GH, Please could you give the size of the main shaft, pinion gear and 2 x main gear bearings
Wow very tricky question as i have no intension to change the orginal bearings i need to open the reel and measure the bearings diameter.😅
@@gulamgh Hi GH. I have just replaced all of the bearings except for the line roller and handle knob bearings as mine is an XSC and the handle knob is slightly different.
SMR62-ZZ OSCILLATION PAWL
SMR63-ZZ X 3 WORM GEAR
SMR128-ZZ PINION REAR
S689-ZZ X 2 CRANK
S6800-ZZ PINION FRONT
I hope this helps buddy.
@@bradleykleinenberg2544 Thank You😁
@@bradleykleinenberg2544 Thank you. Just for doublecheck, those will fit XSD14000 also?
Hi bro..i like to upgrade my xtd 14000 to replace the plastic bush to bearing ..any link for me to purchase..😁
Hi since the pandemic a lot of shops closed so you have to do a bit of research at Google to look in SG miniature bearings.Visit to the shop ask for the sizes of stainless steel bearing. Or you can go on line to purchase these bearing . Hybrid bearings are a bit more expensive but its worthy.
Thank you bro for the information
All the and stay safe👍😊
plastic gears is this a joke?
What plastic gears? It's plastic bush replace to bearings.
@@gulamgh If you look on UA-cam, you will find several videos where they disassemble, for example, the Ultegra XTD reel, and you will see that unfortunately (cost-effectiveness) it is already used in several Shimano models!
@78gyuszi oh ok it's individual preference for me this reel is good enough it will be better with the mentioned upgrade. In my 50 years of fishing sometimes those expensive gears not even a bite but have seen those with the cheapest gear got the most fishes. :)
bravoo Nice video
Thank you.
is it possible to contact you
Hi where are u from currently over at Singapore there is a semi lockdown so no fishing and all fishing shops close😬