Hi Ryan, The basement wall looks great now. I love the nice touch with the Kubota high top table. Looks like you have the start of a nice setup for your videos. Dan
Drilled mine out too but I used a Dent Puller and it snapped out like a bad tooth on the second pull. I liked the music and we all have phrases that we say a lot "If You Know What I Mean"
I’m not sure 🤔.. kinda have to come straight out with it.. reverse slide hammer with vise grips might work.. you just have to get creative and use the tools you have…! Maybe a cut off wheel so you can put a groove in it ,, for a pry bar….
You’re welcome 🙏! Glad you enjoy the show..! I’ll be honest,, not sure if I ever had installed one on that model…. But if you get one through Kubota,, it’ll have directions!! But if you are going a different route.. probably just the easiest expansion plug that’s accessible!! Cheers 🍻 buddy
@@ryanlynch2259 Thank for the quick reply. I did purchase the Kubota block heater and it had instructions but they were slightly vague. They mention using a freeze plug on the right side. However, I'm wondering is this the right side when facing the tractor or the right side when sitting in the cab? Thanks again :)
@ right side when sitting in the machine..! Use the one that they tell you to use!! Might be a little tedious to do.. just take your time and do it meticulously!! Good luck 🍀
@ryanlynch2259 It's similar, may have to just order one and measure the heater. It's hard to tell a size from pictures. The plug on the d722 is .770 in.
I enjoy your videos Ryan, they really help out the people who want to save some money!
Awesome 😎. I’m glad you enjoy the content.. cheers buddy
Excellent video, Ryan!!.. "Tip of the hat" for the dielectric grease on the cord.. You always look out for your customers..😉
Glad you enjoyed the video!! We try to do right.. hope you have a great week
Taking a drill to a brand new engine. Ughh. No thanks. Making it look easy, the mark of a pro. Another good one. Thanks for sharing
I don’t enjoy it either.. pretty simple process! Cleaning up takes the most time. Glad you enjoyed 👍
Hi Ryan, The basement wall looks great now. I love the nice touch with the Kubota high top table. Looks like you have the start of a nice setup for your videos. Dan
Thanks buddy! Work in progress…
Drilled mine out too but I used a Dent Puller and it snapped out like a bad tooth on the second pull. I liked the music and we all have phrases that we say a lot "If You Know What I Mean"
Excellent job!! I know what you mean…..🍻
I have never done one but have heard that they are a real pain. I thought that you made it look easy.
Easy out ,, easy in..! Cleaning up the mess is the hard part..
Any suggestion how you best pull an existing block heater plug to put a new one in.
I’m not sure 🤔.. kinda have to come straight out with it.. reverse slide hammer with vise grips might work.. you just have to get creative and use the tools you have…! Maybe a cut off wheel so you can put a groove in it ,, for a pry bar….
When you install a block heater on a Grand L6060 what freeze plug do you use? Thank you again for all your help and your videos :)
You’re welcome 🙏! Glad you enjoy the show..! I’ll be honest,, not sure if I ever had installed one on that model…. But if you get one through Kubota,, it’ll have directions!! But if you are going a different route.. probably just the easiest expansion plug that’s accessible!! Cheers 🍻 buddy
@@ryanlynch2259 Thank for the quick reply. I did purchase the Kubota block heater and it had instructions but they were slightly vague. They mention using a freeze plug on the right side. However, I'm wondering is this the right side when facing the tractor or the right side when sitting in the cab? Thanks again :)
@ right side when sitting in the machine..! Use the one that they tell you to use!! Might be a little tedious to do.. just take your time and do it meticulously!! Good luck 🍀
Nice video. Do you thank the block heater are any better than the radiator hose heater? I need to get ready for winter.
Thanks 🙏! Probably the block heater.. your putting the heat right where it needs to be
Do you know if this heater will fit the d722 in an 1880? From what im seeing in price book, it wants to use an inline type heater.
I’m not sure 🤔. I imagine it can if it looks like this engine..
@ryanlynch2259 It's similar, may have to just order one and measure the heater. It's hard to tell a size from pictures. The plug on the d722 is .770 in.
@@darrenmoyer269 I think they measure them in millimeters..? If that matters.. good luck with your project buddy!!
What tool are you using to pull out the plug? I need to install on mine.
Freeze plug remover… I got it off the tool truck,, but it not snap on..
Fill that heater up with some fire ball whisky, and it will keep you warm for a long time
Little Bx tractor probably holds a gallon of coolant… last 2 weeks around here..! My roommate is a electrician so,,,,! Haha 😂
Why wearing gloves
Anti freeze is terrible for your skin…. Take care of yourself
The music in the background is annoying as is your over using of the phrase "you know what I'm saying?"
I’m sorry you didn’t enjoy the shop atmosphere.. and I’m sorry I disappointed 😢.