- Tested your MAF and found the wiring is faulty? 🔍 Learn how to repair your loom here: 🛠🔗 ua-cam.com/video/S8GL8VCg7C8/v-deo.htmlsi=RU9jNjPlao3qxb5t - Think it’s your ECU? 💭 Click here to get it re-built: 🛠🔗 link.ecutesting.com/MAFPI
Dude this is the best explantation ever the diagram showing how to test and also the explantion i got a used ecm and i think its faulty im going to use this guide to check it thank u so much man
I feel so lucky to be a garage owner with ECU testing on my door step And a thankyou to the team for a recent speedy mechatronics repair and handy bit of customer service when I had a query post fitting!
Excellent video. I have a question for you. I have a 2012 Rogue with a MAF problem p01 01 code. The Nissan dealer replaced the MAF. I replaced the air cleaner. I did not replace the PCV valve yet. The dealer I go to tells me they cannot fix the problem any more than they have because they do not have a Master Technician??? I am going to have to travel a ways to get a dealer with a Master Technician. The engine light has gone on twice now. It is supposedly fixed now. If not and the light goes on again and the car seems to run fine I want to turn off the engine light. I purchased a Walmart Hyper Tough HT 100 code reader. It is not much on instructions. It connects with your phone via Blue Tooth to give an explanation of the code. I do not need an explanation and I just want to turn off the engine light. My question is, do I have to use the Blue Tooth feature with the HT 100 or can I just plug it to the plug in the car, turn the ignition to on, read the code, and push the red button to clear the code?? Thank you, Tom Spero
hello sir. Great videos you got there. I forgot to put the MAP SENSOR back after spraying some electronic contact cleaner. I road tested my car for about 30 min when I noticed the CHECK ENGINE light turn on. I stopped the car and put back the sensor plug in but the check engine light stayed on even after I performed some resetting tries (unplugged the negative battery terminal 1 minute put it back and turned on ignition). I then notice my engine to be a bit hotter than usual and wilder engine vibration upon turning off engine (when the MAP SENSOR is OUT - though normal vibration when the MAP is PLUGGED in). kindly guide me on what to do. thanks and hoping to hear from you soon. 2012 Mitsubishii Strada - Philippines
I totally loved your video!! You’re thorough and brilliant. I just need you to. Slow down lol. You know what you’re doing so well that it pours out lol. Thanks so much , going home to try your advice. Cheers Dino
Дядь, спасибо тебе от русскоязычного телезрителя) Единственное, даже со скоростью 0.75 часто останавливаюсь и отматываю назад😁 Thanks from "occupated Crimea"🤭
Ive been plagued with this p0101 code for years. Tried everything. Changed air flow meter. And map sensors. I allways comes back. But found a way to stop it. Not exactly a fix but works. I noticed if i had mine in sports mode. Ups power slightly and tickover. The po101 code dont come back. ? So i went into manual adaptations Custom selection on car screen. Set power to sports. Then comfort mode with stop start off. It works no more problems and no real difference in fuel consumption. Try it !
Have you tried conducting the tests in this video whilst wiggling the wiring loom from the MAF to the ECU? A performance code can sometimes be set when an intermittent fault occurs, such as damaged wiring that only becomes problematic under load or due to engine vibration. We would also recommend checking for air leaks in the intake system, as these can also cause the P0101. Hope this helps!
@@rlmbuildingful no i am going in on the 29th to ex holden mechanics.... thr car drives beautifully but this code will not go :( i have only changed 2 of 4 oxygen sensors so other than that i wouldnt have a clue... heres hoping! Please let me know if and how you resolve yours if you do...
@@rlmbuildingful update.... the mechanic first found a hole in the air intake and filled it... problem came back. Next there was a hose near back of the engine with some cracks in it.... since that ive had 2 check engine occurences just clear but they subtly come back starting with esp off first. Maybe the maf is readjusting now and it will eventually clear? Time will tell. The next check the mechanic said would be the fuel pump... but you know where that sits ey... could be clogged?? Ive done 250 000 kms on this beauty car... i love it but yeah could be a maintenance thing that way???
My infiniti fx35 2010 model don't accelerate after changing ecu, maf airflow, crank and camshaft sensor including trotter, an ensure the engine timing still not accelerate, so please help me to the solution of fult
I was curious I have a 2013 Subaru WRX STI which gives me intermittent problems mainly misfires and multiple random error codes although no Mass air sensor codes but still wondering if I have some weird mass air flow sensor intermittent problem. I need to change and check the spark plugs which is a pain in the butt on a Subaru. If that doesn't fix it I have an ECM ready to replace my current ECM which I am suspicious of with the random error codes.
Hi. Sounds like a good diagnostic process, checking if the MAF sensor is clean is always a quick and easy fix when dealing with misfires. Hopefully you find the cause of your faults soon!🙏
Yes, I already cleaned my mass air sensor. I need to change my plugs but I suspect it is the ECU with all the erratic error codes. The ECU is under my passenger side carpet, but the biggest problem is unlinking my Cobb tuner from the current ECU and programming my new-used ECU it says 2013 WRX STI on my eBay replacement ECU but hopefully, it is truly compatible. I don't know if it is from the automatic transmission version or even if that truly matters? Cobb told me that ECUs from several years should work with my car hopefully, it truly works. I may have damaged my ECU during COVID when the car sat for a prolonged period with a dome light on and the Optima battery went dead, and I had to try multiple tricks to try to recharge it without success. I'm not looking forward to changing the sparkplugs on that car, though. Not much clearance and a lot to disassemble to get to the plugs. I have changed cam timing belts that were actually easier, particularly on simple 4-cylinder motors.@@Ecutestinglimited
@@guanedits6349 Possibly, out of desperation, I put in a bunch of fuel system cleaners, and so far, it seems to be running better, but I haven't driven it a lot. I have leukemia and don't get out much. I have found that intermittent problems seem to be the hardest to diagnose!
I have a ST 2.5 ford focus it got a circuit A high voltage fault P 0103 i did test my wiring with the multimeter and my 12v. from the fuse box is right then if I test the wiring the negative ,signal I also get 12v but if I remove the connector plug with the engine running the 12v falls away on all of them axcept on the 12v from the fuse box so to me it looks if the mass airflow is at fault but iam not sure what must the voltage be .The ford focus st 2.5 wiring diagram does not show me on the wiring diagram what colour is signal 5volt or negative .
Hi. A dirty or faulty throttle body can sometimes be the cause of a P0101 fault code, however we would still recommend completing the checks in this video to rule out a fault with the MAF sensor or its circuit first as this is the more likely cause.
Hi. The P1479 fault code usually indicates a problem with the brake booster system on Volkswagen vehicles. We would recommend checking vacuum lines, hoses, and connections for any signs of damage, leaks, or disconnections.
Excellent.. intuitive video! Question: I have a code P0420 after muffler got cut..replaced with after market and new O2 sensor, but still come back with after ran on freeway 50-60 miles. May I get an advise... Thx !!
Hi. Please email our technical support team at info@ecutesting.com with the following details. Your make and model of vehicle, the part number of your unit, any symptoms of the fault including fault codes, and any fixes you have attempted. They will be able to advise you further. Thanks.
I have CLS 320 CDI which has two MAF sensors with built in IAT intake temperature sensors. I have both MAF and IAT error codes and cant figure out whats wrong! I ran all tests look fine, values within range, voltage present at the connections. I guess the only thing is to check the wire resistance from ECU to the sensors? Maybe some intermittent short
Hi. It would definitely be worth checking the readings at the ECU to ensure the fault doesn't lie with it or the wiring. However, if you are getting good readings at the MAF/IAT connector then it is unlikely the fault would be with the ECU itself. We would recommend checking the terminal tension on the sensor connector to ensure it isn't damaged, or you could conduct the tests again whilst wiggling the wiring loom all the way from the sensor to the ECU to see if the fault is caused intermittently by damaged wiring shorting when the engine is vibrating. If these all check out ok then it probably means the sensor(s) are the cause of the fault. Hope this helps!
Check EGR valve isn’t stuck open. Diesels change things, if a EGR valve is stuck open and the cylinder is getting filled with egr as well as airflow, there will be less airflow to fill the cylinder, hence a airflow meter fault code.. blanking the egr with a temporary blanking plate or watching egr valve live data while driving will tell you what you wanna know 👍
@@Taylor-DM156 EGR valve has been mechanically blocked and removed from ECU correctly by an indy garage. Resetting adaptation values specifically with Xentry software seems to get rid of the issue. Disconnecting the battery seems to bring back the issue, which is strange, I though ECU can hold adaptation values and remap , seems not for adaptation values.
@@tehdreamer hmm interesting. Normally when I do egr and dpf deletes I clear any learned data / adaptation values before I load the remap file. Is the egr “operating” still in live data?
- Tested your MAF and found the wiring is faulty? 🔍 Learn how to repair your loom here: 🛠🔗 ua-cam.com/video/S8GL8VCg7C8/v-deo.htmlsi=RU9jNjPlao3qxb5t
- Think it’s your ECU? 💭 Click here to get it re-built: 🛠🔗 link.ecutesting.com/MAFPI
I had this problem. Cost me a pretty penny. I could have used this a few months back. Thank you for the information. Keep up the work.
GREAT VIDEO! i keep getting a gearbox valve malfunction (electrical short) - not sure where to start -DSG 2.0 GTI
Very good explanation, Thank you 👍
He sure knows his stuff but he talked too fast - I get lost trying to follow him - what is the hurry - take it slow
Dude this is the best explantation ever the diagram showing how to test and also the explantion i got a used ecm and i think its faulty im going to use this guide to check it thank u so much man
Really comprehensive. Love your work!
Thank you very much for your valuable information. Greetings from Turkey.
damn this was a nice good video! more of these for all the sensors please!
Thank you! We will be creating more videos on sensors in the future so stay tuned 👍
I feel so lucky to be a garage owner with ECU testing on my door step
And a thankyou to the team for a recent speedy mechatronics repair and handy bit of customer service when I had a query post fitting!
Hi. Thank you for the kind words, we're glad we could help you get back on the road 👍
Well done, Sir! Thank you!😊
Hi great videos ! Question where do you find wiring diagrams?
I want to know how the ecu functions with the trotter relay, i mean how they do transition of electrical (intersection of wires)
Excellent video. I have a question for you. I have a 2012 Rogue with a MAF problem p01 01 code. The Nissan dealer replaced the MAF. I replaced the air cleaner. I did not replace the PCV valve yet. The dealer I go to tells me they cannot fix the problem any more than they have because they do not have a Master Technician??? I am going to have to travel a ways to get a dealer with a Master Technician. The engine light has gone on twice now. It is supposedly fixed now. If not and the light goes on again and the car seems to run fine I want to turn off the engine light. I purchased a Walmart Hyper Tough HT 100 code reader. It is not much on instructions. It connects with your phone via Blue Tooth to give an explanation of the code. I do not need an explanation and I just want to turn off the engine light. My question is, do I have to use the Blue Tooth feature with the HT 100 or can I just plug it to the plug in the car, turn the ignition to on, read the code, and push the red button to clear the code??
Thank you, Tom Spero
hello sir. Great videos you got there. I forgot to put the MAP SENSOR back after spraying some electronic contact cleaner. I road tested my car for about 30 min when I noticed the CHECK ENGINE light turn on. I stopped the car and put back the sensor plug in but the check engine light stayed on even after I performed some resetting tries (unplugged the negative battery terminal 1 minute put it back and turned on ignition). I then notice my engine to be a bit hotter than usual and wilder engine vibration upon turning off engine (when the MAP SENSOR is OUT - though normal vibration when the MAP is PLUGGED in). kindly guide me on what to do. thanks and hoping to hear from you soon. 2012 Mitsubishii Strada - Philippines
Thanks a mil for using your knowledge to educate true man
I totally loved your video!! You’re thorough and brilliant. I just need you to. Slow down lol. You know what you’re doing so well that it pours out lol.
Thanks so much , going home to try your advice. Cheers
Dino
Thanks! Sorry for the rapid fire info, but we hope the video helps you out! 🙏
Some of us admire the rapid fire info… hahahha
Дядь, спасибо тебе от русскоязычного телезрителя) Единственное, даже со скоростью 0.75 часто останавливаюсь и отматываю назад😁 Thanks from "occupated Crimea"🤭
Ive been plagued with this p0101 code for years. Tried everything. Changed air flow meter. And map sensors. I allways comes back. But found a way to stop it. Not exactly a fix but works. I noticed if i had mine in sports mode. Ups power slightly and tickover. The po101 code dont come back. ? So i went into manual adaptations Custom selection on car screen. Set power to sports. Then comfort mode with stop start off. It works no more problems and no real difference in fuel consumption. Try it !
P0101 tried everything wont go.... taken to mechanics etc its driving me nuts! Odbc reads p0101 changed maf etc etc....
Have you tried conducting the tests in this video whilst wiggling the wiring loom from the MAF to the ECU? A performance code can sometimes be set when an intermittent fault occurs, such as damaged wiring that only becomes problematic under load or due to engine vibration. We would also recommend checking for air leaks in the intake system, as these can also cause the P0101. Hope this helps!
Same, did you fix yours?
@@rlmbuildingful no i am going in on the 29th to ex holden mechanics.... thr car drives beautifully but this code will not go :( i have only changed 2 of 4 oxygen sensors so other than that i wouldnt have a clue... heres hoping! Please let me know if and how you resolve yours if you do...
@@rlmbuildingful update.... the mechanic first found a hole in the air intake and filled it... problem came back. Next there was a hose near back of the engine with some cracks in it.... since that ive had 2 check engine occurences just clear but they subtly come back starting with esp off first. Maybe the maf is readjusting now and it will eventually clear? Time will tell. The next check the mechanic said would be the fuel pump... but you know where that sits ey... could be clogged?? Ive done 250 000 kms on this beauty car... i love it but yeah could be a maintenance thing that way???
My infiniti fx35 2010 model don't accelerate after changing ecu, maf airflow, crank and camshaft sensor including trotter, an ensure the engine timing still not accelerate, so please help me to the solution of fult
Same here with my BMW 525i 6cld
I was curious I have a 2013 Subaru WRX STI which gives me intermittent problems mainly misfires and multiple random error codes although no Mass air sensor codes but still wondering if I have some weird mass air flow sensor intermittent problem. I need to change and check the spark plugs which is a pain in the butt on a Subaru. If that doesn't fix it I have an ECM ready to replace my current ECM which I am suspicious of with the random error codes.
Hi. Sounds like a good diagnostic process, checking if the MAF sensor is clean is always a quick and easy fix when dealing with misfires. Hopefully you find the cause of your faults soon!🙏
Yes, I already cleaned my mass air sensor. I need to change my plugs but I suspect it is the ECU with all the erratic error codes. The ECU is under my passenger side carpet, but the biggest problem is unlinking my Cobb tuner from the current ECU and programming my new-used ECU it says 2013 WRX STI on my eBay replacement ECU but hopefully, it is truly compatible. I don't know if it is from the automatic transmission version or even if that truly matters? Cobb told me that ECUs from several years should work with my car hopefully, it truly works. I may have damaged my ECU during COVID when the car sat for a prolonged period with a dome light on and the Optima battery went dead, and I had to try multiple tricks to try to recharge it without success. I'm not looking forward to changing the sparkplugs on that car, though. Not much clearance and a lot to disassemble to get to the plugs. I have changed cam timing belts that were actually easier, particularly on simple 4-cylinder motors.@@Ecutestinglimited
@@ChetJangDid you fix the issue?
@@guanedits6349 Possibly, out of desperation, I put in a bunch of fuel system cleaners, and so far, it seems to be running better, but I haven't driven it a lot. I have leukemia and don't get out much. I have found that intermittent problems seem to be the hardest to diagnose!
Got a p0102 fault on my Mercedes change d maf airflow but it still not working.csn u plz tell what to do
Dear many thanks very useful vedio
Excellent sir! Thanks
Wow your work is really amazing ❤
Thank you very much! 👍
I have a ST 2.5 ford focus it got a circuit A high voltage fault P 0103 i did test my wiring with the multimeter and my 12v. from the fuse box is right then if I test the wiring the negative ,signal I also get 12v but if I remove the connector plug with the engine running the 12v falls away on all of them axcept on the 12v from the fuse box so to me it looks if the mass airflow is at fault but iam not sure what must the voltage be .The ford focus st 2.5 wiring diagram does not show me on the wiring diagram what colour is signal 5volt or negative .
can you work more videos on Toyota Hilux, Yaris and also v8 Landcruiser engines
Can a faulty throttle body cause a maf sensor p0101 code? Seperate code p0300 multiple misfire.
Hi. A dirty or faulty throttle body can sometimes be the cause of a P0101 fault code, however we would still recommend completing the checks in this video to rule out a fault with the MAF sensor or its circuit first as this is the more likely cause.
Hello, I have this code p0103. Does it mean a power outage?
Amazing channel 👍👏👏 love it!!! So simple i can do it. No more dealership 600 dollars Bill's.
Hi, I'm on a 2003 VW Passat 1.8t and the fault code I get is P1479 please advise
Hi. The P1479 fault code usually indicates a problem with the brake booster system on Volkswagen vehicles. We would recommend checking vacuum lines, hoses, and connections for any signs of damage, leaks, or disconnections.
Maybe the brake pedal is tough????
Excellent.. intuitive video!
Question: I have a code P0420 after muffler got cut..replaced with after market and new O2 sensor, but still come back with after ran on freeway 50-60 miles. May I get an advise...
Thx !!
I need help in transmission software seat leon mk3
Hi. Please email our technical support team at info@ecutesting.com with the following details. Your make and model of vehicle, the part number of your unit, any symptoms of the fault including fault codes, and any fixes you have attempted. They will be able to advise you further. Thanks.
Can u not physically clean up the sensor ?
Subscribed! Thanks!
love your edtiting
Thanks buddy
I want to learn how to hacking matiz ecm and other car am in automotive field
terbaik bro
Tank you
I have a P0101 i will try to clean the sensor with a proper clean spray
❤❤❤ useful thank you sir
perfekt 😊
So you hooked to orange and yellow on your car
I have CLS 320 CDI which has two MAF sensors with built in IAT intake temperature sensors. I have both MAF and IAT error codes and cant figure out whats wrong! I ran all tests look fine, values within range, voltage present at the connections. I guess the only thing is to check the wire resistance from ECU to the sensors? Maybe some intermittent short
Hi. It would definitely be worth checking the readings at the ECU to ensure the fault doesn't lie with it or the wiring. However, if you are getting good readings at the MAF/IAT connector then it is unlikely the fault would be with the ECU itself. We would recommend checking the terminal tension on the sensor connector to ensure it isn't damaged, or you could conduct the tests again whilst wiggling the wiring loom all the way from the sensor to the ECU to see if the fault is caused intermittently by damaged wiring shorting when the engine is vibrating. If these all check out ok then it probably means the sensor(s) are the cause of the fault. Hope this helps!
Check EGR valve isn’t stuck open. Diesels change things, if a EGR valve is stuck open and the cylinder is getting filled with egr as well as airflow, there will be less airflow to fill the cylinder, hence a airflow meter fault code.. blanking the egr with a temporary blanking plate or watching egr valve live data while driving will tell you what you wanna know 👍
@@Taylor-DM156 EGR valve has been mechanically blocked and removed from ECU correctly by an indy garage. Resetting adaptation values specifically with Xentry software seems to get rid of the issue. Disconnecting the battery seems to bring back the issue, which is strange, I though ECU can hold adaptation values and remap , seems not for adaptation values.
@@tehdreamer hmm interesting. Normally when I do egr and dpf deletes I clear any learned data / adaptation values before I load the remap file. Is the egr “operating” still in live data?
@@tehdreamer sounds like the remap hasn’t turned egr off properly..
Rude not to subscribe….
Thank you for the support! 👍
@405_hiv= you re skin pain
iI am happy
I feel like I'm in automotive college.
We're glad you enjoyed the video! 👍
Why are you wearing surgery gloves?
To avoid electrostatic discharge from body
Very good explanation, Thank you👍
I want to know how the ecu functions with the trotter relay, i mean how they do transition of electrical (intersection of wires)
I want to know how the ecu functions with the trotter relay, i mean how they do transition of electrical (intersection of wires)
I want to know how the ecu functions with the trotter relay, i mean how they do transition of electrical (intersection of wires)