PlanSwift Template | Slab | Steel Reinforcement Calculation | Part & Assemblies | Level 2

Поділитися
Вставка
  • Опубліковано 24 гру 2024

КОМЕНТАРІ • 56

  • @wajidsaleem7311
    @wajidsaleem7311 3 роки тому +3

    sir for no of bars we normally use the formula [(Effective span/c to c distance)+1]

    • @SaadyChohan
      @SaadyChohan  3 роки тому +1

      The ultimate purpose is to get the desired result. No matter what you use dear :)

    • @MrIntrovert-p7l
      @MrIntrovert-p7l Рік тому

      @@SaadyChohan the quetion here how can we add the distance plus +1 on this template thank you

  • @darshanshah4621
    @darshanshah4621 Рік тому +1

    so how to add extra length of bent up bar in template?

    • @SaadyChohan
      @SaadyChohan  Рік тому

      By customization.
      Stay connected:
      www.linkedin.com/in/saady-chohan/
      facebook.com/SaadyChohan.AEC
      instagram.com/saady.chohan/

  • @ivandc1908
    @ivandc1908 4 місяці тому

    Your videos are so so powerful. I learned a lot today.
    However, I have 1 question. How to add the overlap (40 x bar dia) in templates?

    • @SaadyChohan
      @SaadyChohan  4 місяці тому

      Well, it depends on how you measure the Qty. Otherwise, you consider additional rates. And I believe, I have shown this in QS Programme videos. Did you find your answer there?

  • @prasanthk1748
    @prasanthk1748 7 місяців тому

    I am using this kind of templates..but when i came to calculate the beam steel qty
    Main steel and its L bends / curtails, and end steel how
    Do you have a solution for this?

    • @SaadyChohan
      @SaadyChohan  7 місяців тому

      Through Customization you can. If u can calculate on Excel, you can do it on PlanSwift too.

  • @muhammaduzair6187
    @muhammaduzair6187 2 роки тому +1

    Thanks for Sharing the Video,
    I have a question, Can you Explain the calculation of steel Reinforcement at the joint of the column and footing.

    • @SaadyChohan
      @SaadyChohan  2 роки тому

      I have shared it in Episode 14 of QS Programme.
      ua-cam.com/video/ayYN0pkDEww/v-deo.html

    • @muhammaduzair6187
      @muhammaduzair6187 2 роки тому +1

      Thank you.
      I will come to you if I have any question after watching this video.

    • @SaadyChohan
      @SaadyChohan  2 роки тому

      Take your time.
      www.linkedin.com/in/saady-chohan/
      facebook.com/SaadyChohan.AEC
      instagram.com/saady.chohan/
      twitter.com/SaadyChohan

  • @kalistasjayawickrama
    @kalistasjayawickrama 2 роки тому +1

    Sir please share the beam reinforcement templates creation tutorial ?

    • @SaadyChohan
      @SaadyChohan  2 роки тому

      SOON.
      Follow for more!
      www.linkedin.com/in/saady-chohan/
      facebook.com/SaadyChohan.AEC
      instagram.com/saady.chohan/
      twitter.com/SaadyChohan

  • @علاءحسين-ي8ب
    @علاءحسين-ي8ب 5 місяців тому

    Hello, how can I calculate the overlap of reinforcement steel?

    • @SaadyChohan
      @SaadyChohan  5 місяців тому +1

      Well, it depends on how you measure the Qty. Otherwise, you consider additional rates.

  • @BilalAhmed-eq8yp
    @BilalAhmed-eq8yp Рік тому +1

    We greatly value your template tutorials and would love to see more videos like them.❤

    • @SaadyChohan
      @SaadyChohan  Рік тому

      Thanks for the feedback.
      Stay connected:
      www.linkedin.com/in/saady-chohan/
      facebook.com/SaadyChohan.AEC
      instagram.com/saady.chohan/

  • @moviesmagic7060
    @moviesmagic7060 2 роки тому +1

    Great Tutorial.. one thing. What about Top Extra and Projection Extra and laps?

    • @SaadyChohan
      @SaadyChohan  2 роки тому +1

      Thanks for watching. Soon, you ll find more detail tutorials.
      Follow for more!
      www.linkedin.com/in/saady-chohan/
      facebook.com/SaadyChohan.AEC
      instagram.com/saady.chohan/
      twitter.com/SaadyChohan

  • @valentinekofiadu9928
    @valentinekofiadu9928 Рік тому +2

    Excellent vid, now I am one step to automating my work completely. Thank you

    • @SaadyChohan
      @SaadyChohan  Рік тому +1

      Thanks for watching and sharing your feedback.
      www.linkedin.com/in/saady-chohan/
      facebook.com/SaadyChohan.AEC
      instagram.com/saady.chohan/
      twitter.com/SaadyChohan

  • @smartgadgets8329
    @smartgadgets8329 2 роки тому +1

    Thank you so much for the complete guide, my Q is how to add the overlap,

    • @SaadyChohan
      @SaadyChohan  2 роки тому

      Thanks for the comments. Soon I will prepare another video with a more complex example.
      📢CONNECT
      www.linkedin.com/in/saady-chohan/
      facebook.com/SaadyChohan.AEC
      instagram.com/saady.chohan/

  • @cephasesena9805
    @cephasesena9805 2 місяці тому

    Please we need a video on taking off for roof

    • @SaadyChohan
      @SaadyChohan  2 місяці тому

      Soon you will find more videos on the channel. Stay connected and keep learning.
      Follow me on Social Media:
      www.linkedin.com/in/saady-chohan/
      facebook.com/SaadyChohan.AEC
      instagram.com/saady.chohan/
      twitter.com/SaadyChohan

  • @zaimmuddinazmi5150
    @zaimmuddinazmi5150 2 роки тому

    Hi sir , do u have template for beam steel?

    • @SaadyChohan
      @SaadyChohan  2 роки тому

      Check the playlist of Planswift template. There are a few templates tutorials available and the rest I will upload soon.
      Contact me if you have questions.
      www.linkedin.com/in/saady-chohan/
      facebook.com/SaadyChohan.AEC
      instagram.com/saady.chohan/
      twitter.com/SaadyChohan

  • @manikandanshanmugam5329
    @manikandanshanmugam5329 Місяць тому

    I want beam steel template.. Rply with link plz

    • @SaadyChohan
      @SaadyChohan  Місяць тому +1

      Everyone has different methods for preparing templates. Even if someone prepared and shared a template, it’s not guaranteed that others can benefit or understand it, as there are calculations involved based on different standards and approaches. I recommend you create your own templates. If you need support, i can guide you, Please contact me through Instagram. The best way to start is by creating a formula to get the quantity on an Excel sheet first and then applying the same logic in PlanSwift.

    • @manikandanshanmugam5329
      @manikandanshanmugam5329 Місяць тому

      @SaadyChohan thank u so much

  • @nakhshabmehrab8526
    @nakhshabmehrab8526 2 роки тому +1

    Sir kindly, upload template video for stirrups and Beam also.
    I’ll be very grateful to you.

    • @SaadyChohan
      @SaadyChohan  2 роки тому +1

      SOON.
      Keep supporting.
      Follow for more!
      www.linkedin.com/in/saady-chohan/
      facebook.com/SaadyChohan.AEC
      instagram.com/saady.chohan/
      twitter.com/SaadyChohan

  • @hikooriXgaming
    @hikooriXgaming 9 місяців тому

    Why the formula or auto-calculate does not work? I followed every step, don't know why it did not work

    • @SaadyChohan
      @SaadyChohan  9 місяців тому

      Sometimes a small thing we miss can cause an issue. I suggest you to try again. Hopefully, it ll work and the process ll help you learn a lot.

  • @ilhamilfat5722
    @ilhamilfat5722 3 роки тому +1

    Hi sir ❤️
    I have learned many things on pour previous videos. #Thanks
    And i have a one question that are may you teach how to abstract by template
    For example : substract door and window from wall

    • @SaadyChohan
      @SaadyChohan  2 роки тому +1

      Thanks for sharing your feedback.
      Yes, I have shown the door and window opening template in this video.
      ua-cam.com/video/bF7kqsCnIO0/v-deo.html
      📢Please Connect & Support
      www.linkedin.com/in/saady-chohan/
      facebook.com/SaadyChohan.AEC
      instagram.com/saady.chohan/

  • @kvarun92
    @kvarun92 2 роки тому +1

    It's a great video, I've got a question instead of manually typing the long span and short span distance can we take the digitised reading from drawing?

    • @SaadyChohan
      @SaadyChohan  2 роки тому

      You can do that also. And for that purpose, a different kind of template is required. In future, I will share that also.
      Contact me if you have questions.
      www.linkedin.com/in/saady-chohan/
      facebook.com/SaadyChohan.AEC
      instagram.com/saady.chohan/

  • @RonnieKhan-l9u
    @RonnieKhan-l9u Рік тому

    This is not steel estimation, its just measuring quantity. No cut off and bent up was incorporated, No lapping, no Hook lengths, no bend lengths. Overall its just a general method. But professional not feasible in professional documentation

    • @SaadyChohan
      @SaadyChohan  Рік тому

      Thanks for watching the video and sharing your thought in a comment 😇

  • @basharatali4394
    @basharatali4394 2 роки тому

    Please Also creat Template for Concrete Retaining wall , Concrete Piling(deep foundation),circular column & circular slab

    • @SaadyChohan
      @SaadyChohan  2 роки тому

      Thanks for your suggestion. I will consider it.
      Contact me if you have questions.
      www.linkedin.com/in/saady-chohan/
      facebook.com/SaadyChohan.AEC
      instagram.com/saady.chohan/

  • @civilsolutionbynoshad894
    @civilsolutionbynoshad894 Рік тому

    Very interesting software

    • @SaadyChohan
      @SaadyChohan  Рік тому

      It really is!
      Thank you..
      Please follow for more:
      www.linkedin.com/in/saady-chohan/
      facebook.com/SaadyChohan.AEC
      instagram.com/saady.chohan/
      www.reddit.com/user/SaadyChohan
      twitter.com/SaadyChohan

  • @zerodarkthirty8223
    @zerodarkthirty8223 2 роки тому +1

    THANK YOU GOOD SIR!

    • @SaadyChohan
      @SaadyChohan  2 роки тому

      Thanks for watchjng.
      www.linkedin.com/in/saady-chohan/
      facebook.com/SaadyChohan.AEC
      instagram.com/saady.chohan/

  • @wasifwasif6309
    @wasifwasif6309 3 роки тому

    Thank you so much sir 💫💫❤️

    • @SaadyChohan
      @SaadyChohan  3 роки тому

      Welcome 🙌
      www.linkedin.com/in/saady-chohan/
      facebook.com/SaadyChohan.AEC
      instagram.com/saady.chohan/
      www.reddit.com/user/SaadyChohan
      twitter.com/SaadyChohan

  • @amirwaziramirwazir
    @amirwaziramirwazir 2 роки тому +1

    Thank You

  • @kamrulhassan2383
    @kamrulhassan2383 2 роки тому +1

    Please make clear concept of Bar bending cutting length, i dislike it

  • @HunterCampbell-e2s
    @HunterCampbell-e2s Рік тому

    SLOW DOWN!!!!!!!!!!!!!!!!!!

    • @SaadyChohan
      @SaadyChohan  Рік тому

      Thank you For the recommendation. I will consider it for future videos. 😊