Mr. Saady, i was in your Plan swift Induction Program In ECC - Dubai back in 2018. It was a great help for me to get in touch with Plan Swift Software. Thank You and i am still following your videos. Wish You Good Luck! Thank You!
You are very welcome! Follow me on Social Media: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Glad it was helpful! Thanks for watching the video. Follow me on Social Media: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Good to see your comment. :) Stay connected.👇 www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Thanks for sharing your valuable feedback. Means a lot. :) Follow for more! www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
You are most welcome!! Follow me on Social Media: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Thank you. Stay connected for more videos! Follow me on Social Media: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
You're welcome! Glad it's helpful for your takeoff estimates. Follow me on Social Media: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Glad to hear that! Follow me on Social Media: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Seriously you have really impact your knowledge to lots of people let me remind you that is only Allah that reward you because you have really tried for lots of yound QS even outside your state or country Pls sir don't forget you have not release any video of roof work in the QS programme or on your channel pls I will be gad if done
Thanks for the feedback. Happy to read it. Soon, I will upload. Stay connected. www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/
Thanks for watching and sharing your feedback. www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Sir I use both metric and imperial to work with depending on the project so should I change the units in advanced tab every single time when I switch to metric of imperial?
Better to create both instead of changing it every time. Follow for more! www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
I just done this template for estimating our jobs and it certainly saves alot of time estimating and money as I have been going over in insulation quantities due to not taking off the doors and windows. Thanks Saady.👍
I am so happy to share that I got a lot of benefits from your videos many thanks for your explanations and detailings and for your clear understanding☺
Wonderful! Thank you for your support!! Follow me on Social Media: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
AREA drop down in mine does not show english units (CU YD, SQ FT, etc) only metric units are available. How to make both metric and english available in dropdown? Many thanks in advance!
Which version are you using? And you can bring it though template as well. Follow for more! www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
I am struggling to find a template or make a template on calculating materials required for a suspended grid ceiling. Does anyone know of one or are you able to help me Saady?
Thanks for watching this video. There are many ways to create templates. I have many videos, If you learn and understand the concept, you can create by your own. Follow for more! www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/
@@SaadyChohan thanks for the reply I have made some but I struggle with developing one for the suspended ceilings to calculate material required. Eg. how many droppers, how much main bars, crossbars, clips, tiles, etc.
Hi Mr. Saady First of all thank you very much to upload these excellent video for one of my project there is 18 windows of different sizes, i upload all the windows upto w18 width, w18 height and w18 qty. upto here all is perfect when i need to click on w1 qty ait showing on very small scale and cant unable to read so please advise us how can i make the large to readable type Thanks in advance
You may need to adjust the desktop setting. It will effect on PlanSwift as well. Stay Connected and keep learning. www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Finally, You can create the template now :) Stay connected.👇 www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Thanks for watching. Imtiaz, Templates can be customized based on requirements by the following logic. There is no specific rule or way. As long you get the desired result.
Salam sir. Im watching your videos well. Its so help full for ke sir. I have a doubt sir. Planswift Excel integration not working my pc sir and when right click in Excel i dont have planswift option in that menu . How can I fix it sir.
PlanSwift & Excel Integration will work only if you have latest version. Which versions are you using? Follow for more! www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Soon, I will upload a template about that. Stay connected. www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Sir will you please explain about Beam steel reinforcement template in detail for Curtail bars, top end & mid support for continues beam in detail. Thanks for all the videos. Pushkar.
Mr.Saadt,Thank you for our presentation,I faced an issue, I got the formula calculation for the block work 49.72 SQM ,but shown the legend 49.50 SQM,please explain the problem.
These examples where shown to educate and guide people about process behind calculations. There are possibilities for an error. If you identify the error its a good thing. 😊
Glad it was helpful! Follow me on Social Media: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Block work is usually calculated in Cft./cu.m while you have calculated in Sft. my question is can I add a third property of "door/window thickness" to make it a Cft. value to be deducted from Cft value of Block work? its ok right?
Dear, we don't get the quantity based on "usually". We get the Quantity Takeoff & follow the unit which are defined by Rules of Measurement / Standard / Principle. Check the page #172 of NRM2 Thanks for watching. Stay connected and keep learning. Follow for more! www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/
Thanks for watching and supporting it. :) Follow for more! www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
I appreciate your feedback. Follow for more! www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
There will be less chances to recover but you can try from backend. C Drive > Program File > PlanSwift > Data > Storage > Local > Jobs 👇🏻Follow for quick questions & updates. www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Thanks for watching and sharing your feedback. www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Mr. Saadi, Good to know how to subract area of the openings. However in pricing a job, normally we don't deduct these openings. These opening area compensates for the extra work needed around these openings By the way is this software available in Pakistan and if so from where. Thanks Nasir Ohio USA
I appreciate your Insights. And as for PlanSwift availability in Pakistan, the software is accessible globally, and you can purchase it directly from the official PlanSwift website.
Thank you 😊! Follow me on Social Media: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
You’re welcome 😊 Follow me on Social Media: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Great to hear! Thanks for watching the videos. Follow me on Social Media: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
You're welcome 😊! Thanks for watching the video. Follow me on Social Media: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Thank you for watching the videos! Follow me on Social Media: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
A very educative video sir please continue to do more videos and can you please please post a video on how to use planswift to quantify roof structures such as rafters and purlins
AOA! i hope you are good.Can we use the template link to other template like if we are masonry template link the door ,window and ventilator so , we are one time takeoff Quantity door and window and the doors, window template takeoff of the area x thickness we get the volume which subtract the masonry volume. now the time first time takeoff the for the masonry and secondly make the schedule of doors , window ,ventilaor seperately . which is 2 time working.if have any solution?🙂
Thanks for watching the video. I will recommend you to watch the complete video again or checkout the courses of Noble Quantity Surveyors for better understanding of QS Work. It will help you to Learn, Earn & Grow. nobleqs.com/course-details/basic-quantity-surveying-with-planswift Follow me on Social Media: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Thanks for watching the video. Follow me on Social Media: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Thanks for the feedback. Let me know If you have questions :) Stay connected.👇 www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
You have been a wonderful resource person on Planswift. Keep the good work. In many of my templates plugin, i discover that my unit does not show on the estimating table which demands that i enter it manually. Please kindly assist with this challenge. Thank you in advance
Thanks for watching the video. Follow me on Social Media: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Dear, I will recommend you to check the episode #19 of QS Programme. It will give you the idea. And for more questions, contact me through Insta. www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Please check the given playlist. ua-cam.com/play/PLUyBVnwitx_Yv_tMuaJajZBJL_uyK6-wH.html For more details, contact me through Insta. www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Glad you like it! Please follow for more: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ www.reddit.com/user/SaadyChohan twitter.com/SaadyChohan
The Courses by Noble QS will provide beyond what the videos will cover. For more information regarding the course and its contents, please refer to their website. Thank you.
Its the latest version. You can download directly from the website of PlanSwift. Follow for more! www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/
Templates can be customised as per your methods and requirements, it is strongly advised that you go through the video and create your own templates dear. This way you can customise ad per your needs.
Hello, I'm using Planswift for villa quantity estimation, and the imported tiff is a little blurry even at 400+ dpi. Snapping is also not an option. This will result in a variation in accuracy. Cad import is not an option because using too many drawings will result in a crash. How does planswift perform in terms of quantity estimation software? Is it only for small building plans? Or any other method to achieve autocad measurement accuracy. Ps. I have watched your video of pdf to tiff
Please assist in the above matter. Since I've started using planswift for all of my estimates. Accuracy is my primary concern as I continue to learn and improve. Is there any doubt in my question? I can go into more detail.
Dear Rakshith, PlanSwift Software has been used in a wide range of large development projects, including airports, Expo 2020, infrastructure, and many others. I am sure you can assume the size of their project & drawings. Can you tell me which version are you using right now?
@@SaadyChohan Mr. Saady Chohan That sounds fantastic. I'm running version 10.3. My concern is how to achieve accuracy without snapping (in tiff). If I use a PDF, it may lag depending on the number of drawings or the size of the PDF, correct?
PlanSwift offer you the maximum accuracy but it depends on the drawing you are dealing with. Send me the PDF file through LinkedIn. I will check and try to offer you a solution.
Where to get the square root option while calculating the volume of a trapezoid footing? Kindly show how we can get. This video was awesome and really informative. Can save a lot of time while takeoff. Thank you very much sir
Thanks for the feedback. For more questions, just contact me through Insta. I will try to help. Stay connected.👇 www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Hi Thankyou for ur video , i created the template and got the desire result , bt while labelling it is giving value of length of the wall instead of the area
Thanks for watching the video. There can be slight errors when creating these templates, try again and see by watching the steps carefully. If it does not work, please contact me through Instagram and I will guide you further. Follow me on Social Media: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Soon, you will find more. Stay connected and keep supporting. www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Thanks for showing interest. I teach PlanSwift for Quantity Surveying from the platform of NobleQS. Promo of Noble QS ua-cam.com/video/DxG5sUrKU_Y/v-deo.html Please get in touch with our team via WhatsApp for more details about the QS course. Sarah (Admin) +971 56 789 9834
Sir plz make a video about NRM and other types of rules books to follow. which is the best and which ones do you follow. I have no information about this so please help me out. Please make a small series on these rules
You can learn template creation from the "Template Playlist" . Its available on my YT Channel. Stay Connected and Keep Learning. www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Thank you for your work sir. Please would you be so kind as to show us how to estimate for roof covering and roof members using planswift? Especially the complex hip roof that has hip and valleys. God bless you sir
Thanks for watching. Please check the QS Programme playlist. Soon, we will explain roof in that series. ua-cam.com/play/PLUyBVnwitx_Yv_tMuaJajZBJL_uyK6-wH.html Follow for more! www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
There may be small errors in the inputs, Please try again, if it does not work drop a message to my Instagram and I will guide you further. Follow me on Social Media: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Thanks for watching the video. I will recommend you to watch the complete video again or checkout the courses of Noble Quantity Surveyors for better understanding of QS Work. It will help you to Learn, Earn & Grow. nobleqs.com/course-details/basic-quantity-surveying-with-planswift Follow me on Social Media: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Thanks for suggestion. Soon you will find more videos on the channel. Stay connected and keep learning. Follow me on Social Media: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Thanks for watching. Stay connected and keep learning. Follow for more! www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Thanks for sharing your feedback. Follow for more! www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
You are most welcome 😊! Follow me on Social Media: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Glad you enjoyed it! Thanks for watching the video. Follow me on Social Media: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Sure, Thanks for suggestion. Soon you will find more videos on the channel. Stay connected and keep learning. Follow me on Social Media: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Thanks for watching and sharing your feedback. Stay Connected and keep learning. www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Thank you for the question, Please go through the following video and you will get an idea: studio.ua-cam.com/users/videov4VL30WH7FY/edit Follow me for more: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Thanks for sharing your feedback. Stay connected and keep learning. www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Soon You will find more videos on my channel. Thanks for watching. Follow me on Social Media: www.linkedin.com/in/saady-chohan/ facebook.com/SaadyChohan.AEC instagram.com/saady.chohan/ twitter.com/SaadyChohan
Mr. Saady, i was in your Plan swift Induction Program In ECC - Dubai back in 2018. It was a great help for me to get in touch with Plan Swift Software. Thank You and i am still following your videos. Wish You Good Luck! Thank You!
Thanks for letting me know.
Please connect.
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Thank you Mr Saady, your channel has been of tremendous help to me in my daily works as a Qty Surveyor.
God bless you richly.
You are very welcome!
Follow me on Social Media:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
This is the best planswift tutorial ever! 🤝
Glad it was helpful! Thanks for watching the video.
Follow me on Social Media:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Wow! This is great!
A huge intervention in one of the most demanding aspects of the software. Thank you, sir. I really appreciate this.
Good to see your comment. :)
Stay connected.👇
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
finally the awaited template is out. am much grateful may good Lord continue to bless you in all your endeavors. best regard sir
Thanks for sharing your valuable feedback. Means a lot. :)
Follow for more!
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Doors and windows deductions have been my headache on planswift. This template video will save me a lot of time. Thanks sir.
You are most welcome!!
Follow me on Social Media:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Lucky to find this channel
Thank you. Stay connected for more videos!
Follow me on Social Media:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Thank you Saady, this is a great clear break down on building templates of all kinds and will be extremely helpful for all my takeoff Estimates.🖖
You're welcome! Glad it's helpful for your takeoff estimates.
Follow me on Social Media:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Gained huge knowledge about Planswift via this series. Really grateful you..! ❤
Glad to hear that!
Follow me on Social Media:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Seriously you have really impact your knowledge to lots of people let me remind you that is only Allah that reward you because you have really tried for lots of yound QS even outside your state or country
Pls sir don't forget you have not release any video of roof work in the QS programme or on your channel pls I will be gad if done
Thanks for the feedback. Happy to read it.
Soon, I will upload. Stay connected.
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
Thank you sir, I just saw your video today and not stayed away to subscribed the channel. I really appreciated your efforts.
Thanks for watching and sharing your feedback.
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Sir I use both metric and imperial to work with depending on the project so should I change the units in advanced tab every single time when I switch to metric of imperial?
Better to create both instead of changing it every time.
Follow for more!
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
I just done this template for estimating our jobs and it certainly saves alot of time estimating and money as I have been going over in insulation quantities due to not taking off the doors and windows.
Thanks Saady.👍
Thanks for watching and letting me know.
Stay connected:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
I am so happy to share that I got a lot of benefits from your videos many thanks for your explanations and detailings and for your clear understanding☺
Wonderful! Thank you for your support!!
Follow me on Social Media:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Millions of thanks for your effort. Please prepare a video customised formula using if statement to choose between 2 or more criteria
Great suggestion! You will be able to more videos in the future. Stay Connected!
thanks saddy...
great and instructional.
can we put a SF amount of a wall in the show label item?
i cant get it to show up.
😊
There is a way to update a label. I have shown an example. " Linear on Label"
Check the very first few videos on my channel. It might help.
@@SaadyChohan ...💥💫👋
thanks will check it out!
AREA drop down in mine does not show english units (CU YD, SQ FT, etc) only metric units are available. How to make both metric and english available in dropdown? Many thanks in advance!
Which version are you using?
And you can bring it though template as well.
Follow for more!
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
I am struggling to find a template or make a template on calculating materials required for a suspended grid ceiling.
Does anyone know of one or are you able to help me Saady?
Thanks for watching this video. There are many ways to create templates. I have many videos, If you learn and understand the concept, you can create by your own.
Follow for more!
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
@@SaadyChohan thanks for the reply I have made some but I struggle with developing one for the suspended ceilings to calculate material required. Eg. how many droppers, how much main bars, crossbars, clips, tiles, etc.
Hi Mr. Saady
First of all thank you very much to upload these excellent video
for one of my project there is 18 windows of different sizes, i upload all the windows upto w18 width, w18 height and w18 qty. upto here all is perfect
when i need to click on w1 qty ait showing on very small scale and cant unable to read so please advise us how can i make the large to readable type
Thanks in advance
You may need to adjust the desktop setting. It will effect on PlanSwift as well.
Stay Connected and keep learning.
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Assalam-o-Alaikum sir thank you. Really I'm waiting for this video for a long time. It's very informative for us.
Finally, You can create the template now :)
Stay connected.👇
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
A great video on the subject. Rather i wold like to suggest one thing. Can we do it with "!Sum(property)" method as well?
Thanks for watching. Imtiaz, Templates can be customized based on requirements by the following logic. There is no specific rule or way. As long you get the desired result.
Salam sir. Im watching your videos well. Its so help full for ke sir. I have a doubt sir. Planswift Excel integration not working my pc sir and when right click in Excel i dont have planswift option in that menu . How can I fix it sir.
PlanSwift & Excel Integration will work only if you have latest version. Which versions are you using?
Follow for more!
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
@@SaadyChohan I'm currently using Planswift 10.3 sir. And which ms office support for planswift 10.3 sir?
Excel above 2013
@@SaadyChohan ok sir i will try. Thanks for your valuable reply sir.
@@SaadyChohan Now i did it sir. Thanks your support sir.
Bundle of thanks, Sir.
I have covered all these items, but I need to understand more: "List database" and sloppy roof with Ridge and Valley.
Soon, I will upload a template about that. Stay connected.
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Sir will you please explain about Beam steel reinforcement template in detail for Curtail bars, top end & mid support for continues beam in detail. Thanks for all the videos.
Pushkar.
Very soon, I will upload a video about about that. Stay connected and keep learning.
Mr.Saadt,Thank you for our presentation,I faced an issue, I got the formula calculation for the block work 49.72 SQM ,but shown the legend 49.50 SQM,please explain the problem.
These examples where shown to educate and guide people about process behind calculations. There are possibilities for an error. If you identify the error its a good thing. 😊
Really good video.
Thank you for explaining so well.
Glad it was helpful!
Follow me on Social Media:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Thanks for this template; just done with the setup; it worked perfectly.
Wow. Thanks for sharing your feedback.
👇🏻Follow for quick questions & updates.
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Block work is usually calculated in Cft./cu.m while you have calculated in Sft. my question is can I add a third property of "door/window thickness" to make it a Cft. value to be deducted from Cft value of Block work? its ok right?
Dear, we don't get the quantity based on "usually".
We get the Quantity Takeoff & follow the unit which are defined by Rules of Measurement / Standard / Principle.
Check the page #172 of NRM2
Thanks for watching. Stay connected and keep learning.
Follow for more!
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
@@SaadyChohan Thank you for the reference.
Asalam O Alikom@i love your videos and guidance on Planswift.
Regards,
Nauman
Thanks for watching and supporting it. :)
Follow for more!
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
From Multan?
Follow for more!
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Thanks a lot, i've learn so much from you Saddy, wish you all the best always.
I appreciate your feedback.
Follow for more!
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Hi Saady,
If by mistakenly overwrite the planswift file with existing planswift job, how to recover it?
There will be less chances to recover but you can try from backend.
C Drive > Program File > PlanSwift > Data > Storage > Local > Jobs
👇🏻Follow for quick questions & updates.
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Thanks so much Saady! Its a life saver for me
Thanks for watching and sharing your feedback.
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Thank you very much for taking time to share this.
Ahmad, I appreciate your continue support. :)
Thanks for the the feedback.
Mr. Saadi,
Good to know how to subract area of the openings. However in pricing a job, normally we don't deduct these openings. These opening area compensates for the extra work needed around these openings
By the way is this software available in Pakistan and if so from where.
Thanks
Nasir
Ohio USA
I appreciate your Insights. And as for PlanSwift availability in Pakistan, the software is accessible globally, and you can purchase it directly from the official PlanSwift website.
Such a useful video bhai!
It was really helpful.
Thanks for sharing your feedback.
Stay connected.👇
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Wow great explaination and visual
Thank you 😊!
Follow me on Social Media:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Hi, how can we inherit some properties from one folder to another so that we can have less inputs? Thanks!
Thank you soooo much. I really appreciated your efforts.🙂🧡
You’re welcome 😊
Follow me on Social Media:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Thank You very much its helps a lot in wall finishes and block work quantities
Great to hear! Thanks for watching the videos.
Follow me on Social Media:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
How to deduct columns Quantity from bricks work?
Check my QS Programme Playlist.
Follow for more!
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Thank you very much for this valuable lesson
You're welcome 😊!
Thanks for watching the video.
Follow me on Social Media:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Lot of Thanks its nice information and easy to understand
Thank you for watching the videos!
Follow me on Social Media:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Sir I have already done it a long time ago
A very educative video sir please continue to do more videos and can you please please post a video on how to use planswift to quantify roof structures such as rafters and purlins
SOON.
Follow for more!
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
I wait this for very long time and today i Got it 😍Thanks sooo much
I remember all your reminders. xD
Stay connected and keep learning.
instagram.com/saady.chohan/
AOA!
i hope you are good.Can we use the template link to other template like if we are masonry template link the door ,window and ventilator so , we are one time takeoff Quantity door and window and the doors, window template takeoff of the area x thickness we get the volume which subtract the masonry volume. now the time first time takeoff the for the masonry and secondly make the schedule of doors , window ,ventilaor seperately . which is 2 time working.if have any solution?🙂
Thanks for watching the video. I will recommend you to watch the complete video again or checkout the courses of Noble Quantity Surveyors for better understanding of QS Work. It will help you to Learn, Earn & Grow.
nobleqs.com/course-details/basic-quantity-surveying-with-planswift
Follow me on Social Media:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Thank you for your sharing ....Nice to learn it
Thanks for watching the video.
Follow me on Social Media:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Thanks for sharing this helpful tutorial.... let me focus and learn
Thanks for the feedback. Let me know If you have questions :)
Stay connected.👇
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
You have been a wonderful resource person on Planswift. Keep the good work.
In many of my templates plugin, i discover that my unit does not show on the estimating table which demands that i enter it manually. Please kindly assist with this challenge. Thank you in advance
Send me the screenshot.
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
God bless you Engineer. Thanks
I appreciate your feedback. 👏🙌
Hi Saady,
Can you please do a video regarding" Events " on the advanced properties tab.
Can you please explain about " Script editor"
Thanks
Thank you for making this video! was really helpful
Thanks for sharing your feedback.
Follow for more!
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
#You are appreciated Sir, Thank you for another important concept getting more of planswift knowledge every time i press view button.
Thanks for sharing your feedback.
Stay connected.👇
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
excellent thanks, I'm gonna try it now.
Thanks for watching the video.
Follow me on Social Media:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Hi sir
pls do a video how can we chk the elevation plaster quantity for G+8 building
Dear, I will recommend you to check the episode #19 of QS Programme. It will give you the idea. And for more questions, contact me through Insta.
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Tnxx alot brother.... Please make a complete series for advance level QS.... 😍😍
Please check the given playlist.
ua-cam.com/play/PLUyBVnwitx_Yv_tMuaJajZBJL_uyK6-wH.html
For more details, contact me through Insta.
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Thanks Saady! It's fantastic !
Glad you like it!
Please follow for more:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
www.reddit.com/user/SaadyChohan
twitter.com/SaadyChohan
do you teach all this in your noble qs course if we buy that course?
The Courses by Noble QS will provide beyond what the videos will cover. For more information regarding the course and its contents, please refer to their website. Thank you.
Sir if can please share this plan-swift version..
Its the latest version. You can download directly from the website of PlanSwift.
Follow for more!
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
can i get a readymade template for different types of walls?its a tough job
Templates can be customised as per your methods and requirements, it is strongly advised that you go through the video and create your own templates dear. This way you can customise ad per your needs.
A great video on the subject.
Thanks for the feedback.
Follow for more!
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
Hello, I'm using Planswift for villa quantity estimation, and the imported tiff is a little blurry even at 400+ dpi. Snapping is also not an option. This will result in a variation in accuracy. Cad import is not an option because using too many drawings will result in a crash. How does planswift perform in terms of quantity estimation software? Is it only for small building plans? Or any other method to achieve autocad measurement accuracy.
Ps. I have watched your video of pdf to tiff
Please assist in the above matter. Since I've started using planswift for all of my estimates. Accuracy is my primary concern as I continue to learn and improve. Is there any doubt in my question? I can go into more detail.
Dear Rakshith,
PlanSwift Software has been used in a wide range of large development projects, including airports, Expo 2020, infrastructure, and many others. I am sure you can assume the size of their project & drawings.
Can you tell me which version are you using right now?
@@SaadyChohan Mr. Saady Chohan That sounds fantastic. I'm running version 10.3.
My concern is how to achieve accuracy without snapping (in tiff).
If I use a PDF, it may lag depending on the number of drawings or the size of the PDF, correct?
PlanSwift offer you the maximum accuracy but it depends on the drawing you are dealing with. Send me the PDF file through LinkedIn. I will check and try to offer you a solution.
@@SaadyChohan okay sure thanks.
Where to get the square root option while calculating the volume of a trapezoid footing?
Kindly show how we can get.
This video was awesome and really informative. Can save a lot of time while takeoff.
Thank you very much sir
Thanks for the feedback. For more questions, just contact me through Insta. I will try to help.
Stay connected.👇
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
It's really helpful and great thanks a lot 🙏
Most welcome!
Please follow for more:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
www.reddit.com/user/SaadyChohan
twitter.com/SaadyChohan
Hi Thankyou for ur video , i created the template and got the desire result , bt while labelling it is giving value of length of the wall instead of the area
Thanks for watching the video. There can be slight errors when creating these templates, try again and see by watching the steps carefully. If it does not work, please contact me through Instagram and I will guide you further.
Follow me on Social Media:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Hi Sir, its video is very helpful , i am waiting for more videos
Soon, you will find more. Stay connected and keep supporting.
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Hi. I'm looking for tutor to teach me face to face on how to use this software.philippines
Thanks for showing interest.
I teach PlanSwift for Quantity Surveying from the platform of NobleQS.
Promo of Noble QS
ua-cam.com/video/DxG5sUrKU_Y/v-deo.html
Please get in touch with our team via WhatsApp for more details about the QS course.
Sarah (Admin)
+971 56 789 9834
Sir plz make a video about NRM and other types of rules books to follow. which is the best and which ones do you follow.
I have no information about this so please help me out. Please make a small series on these rules
Have a look at this video.
ua-cam.com/video/a10jAWdQyp4/v-deo.html
is there any template that I can download?
You can learn template creation from the "Template Playlist" . Its available on my YT Channel.
Stay Connected and Keep Learning.
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
JazakAllah
Thank you for your work sir. Please would you be so kind as to show us how to estimate for roof covering and roof members using planswift? Especially the complex hip roof that has hip and valleys. God bless you sir
Thanks for watching. Please check the QS Programme playlist. Soon, we will explain roof in that series.
ua-cam.com/play/PLUyBVnwitx_Yv_tMuaJajZBJL_uyK6-wH.html
Follow for more!
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
I am using Version 9.0 and I followed all the step in this video. But in the end, when I input opening windows and doors. Its does not deduct. Why ?
There may be small errors in the inputs, Please try again, if it does not work drop a message to my Instagram and I will guide you further.
Follow me on Social Media:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
How to auto arrange numbers of window and doors in alphabetical manner?
Thanks for watching the video. I will recommend you to watch the complete video again or checkout the courses of Noble Quantity Surveyors for better understanding of QS Work. It will help you to Learn, Earn & Grow.
nobleqs.com/course-details/basic-quantity-surveying-with-planswift
Follow me on Social Media:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Thanks for the excellent explanation
But in the case of an arc-shaped window
Thanks for suggestion. Soon you will find more videos on the channel. Stay connected and keep learning.
Follow me on Social Media:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
May God bless you Saady
Thanks for sharing your feedback.
@@SaadyChohan You're welcome sir! we hope to have a template on the quantity of steel in beams, staircases and finishes
SOON. Keep supporting dear :)
Hi sir please i fine it difficult to make template work after creating it
That's Fine. Can you explain the problem that you are facing so that I can understand the issue?
Thank u so much. This is wonderful 🖤
Thanks for watching.
Stay connected and keep learning.
Follow for more!
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
excelente video gracias Saady
Thanks for sharing your feedback.
Stay connected.👇
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
damm bro love you hogya bro.. it works
Thanks for sharing your feedback.
Follow for more!
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
One of the best video.
Thanks Sahil. :)
Stay connected.👇
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Thanks so much Saady
You are most welcome 😊!
Follow me on Social Media:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Thanks for your help
Stay connected and keep learning
Thanks a lot brother!!👍
Thanks for sharing your feedback.
Stay connected.👇
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Great video
Glad you enjoyed it!
Thanks for watching the video. Follow me on Social Media:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Sir urdu lature ha ap k pass
Sirf 1 hi hai.. PlanSwift Training ki..
OH Sir g big🤗 fan hum toh chabal😖 thaaa jo Planswift temp. Use nhi krty thaa or sheet export🥶 k bad excel pa sa kam krty thaa
Thank you ❤️
Please follow for more:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
www.reddit.com/user/SaadyChohan
twitter.com/SaadyChohan
how to have your template sir?
Its recommended to follow instructions and create template. It will help you to learn and create more in future.
Saady, please make for MEP also
Sure, Thanks for suggestion. Soon you will find more videos on the channel. Stay connected and keep learning.
Follow me on Social Media:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
THANK YOU SIR
Thanks for watching and sharing your feedback.
Stay Connected and keep learning.
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Sir i did every thing as shown in the video but my legend still showing linear meter insted of the quantity
Thank you for the question, Please go through the following video and you will get an idea: studio.ua-cam.com/users/videov4VL30WH7FY/edit
Follow me for more:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
very good
Thanks for sharing your feedback.
Stay connected and keep learning.
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Please sir you haven't done tutorials on roof
Soon You will find more videos on my channel. Thanks for watching.
Follow me on Social Media:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
THNAKYOU
Stay Connected and keep learning
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
Thank you
You're welcome!
Please follow for more:
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
www.reddit.com/user/SaadyChohan
Great
Thanks for sharing your feedback.
Stay connected.👇
www.linkedin.com/in/saady-chohan/
facebook.com/SaadyChohan.AEC
instagram.com/saady.chohan/
twitter.com/SaadyChohan
❤❤❤❤