Identifying an R380 clutch slave cylinder - FTC5072/FTC5202

I know pushrods have been done to death, but I'm interested in the slave cylinder perspective.
FTC5072: www.lrworkshop.com/parts/FTC5072
FTC5202: www.lrworkshop.com/parts/FTC5202
LR Workshop: www.lrworkshop.com/
Instagram: / lr_workshop
Twitter: / lrworkshop
Facebook: / landroverworkshop

[@petermenzies1714]

Another valuable piece of research & information. I Frequently see posts with clutch issues after fitting new slave cylinder, this should remove some of the mystery.

[@YMKnorway]

I believe that the old one have imperial threads on pipe, and the new one to td5 is metric.

[@jamieaustin6403]

I had an issue when i built my Td5 110... i bought what i thought was a Td5 slave, but it turned out to be a 300tdi. The piston had a slightly shallower hole in the end (td5 was deeper) which gave the effect of continously applying a bit of pressure on the hydraulics, and thus the cover plate wasnt clamping fully on the clutch plate. Meaning it kept slipping, especially when working hard.

[@erictyrrell3560]

Interesting that LR decided the pushrod need more return force.

[@hammyh1165]

Are they interchangeable though and would it work both ways ?

[@petermenzies1714]

Another valuable piece of research & information. I Frequently see posts with clutch issues after fitting new slave cylinder, this should remove some of the mystery.