24:24 there is a cut in the video, hmmm also those frames had 2cables whatever reason, but those werent soldered back. (maybe leds) I also found it odd that some cables were removed and was never pluged back.
🇧🇷He didn't even change the speaker coil! just put the cover over the old cover, that will bring a bad yield and on top of that it will cause future problems👏🏼 congratulations!
Mister electrónico. hermosos son todos tus vídeos y ya de tu canal soy tu fans numero uno en mi país. me gusta hasta la música que le pones a tus vídeos, como esa ola ola y esa make you move. besos para tu persona y besitos para tus hijitos. desde CHILE....BIANCA ANTONELLA DI VANNI DI BIAGGIO, edad 27
Remplacing the rca connectors you changed the polarity (Red and white connectors !) Not good it seems because the circuit you welded behind is polarised. Very good videos as always. Tell me if am wrong
I look cool but not so cool I don't know if you noticed in the coils of the air gap that they are scratched and that generates a bad job for the coils and as for the cone if you are a technician in whatever you should leave the job at 100 that is starting from scratch I do not choose that it is a good job if it is a good job and you avoid disassembling it completely to be able to leave it at 100 but if it is more recommendable and highly recommended since I have also repaired speakers and I see several details of the speakers in this case the coils as they are physically yes They are not scratched or damaged. I'll explain your video selection work, it's only at 30%. Well, I hope you don't get mad, it's just an observation and I'll give you my opinion, regards ✌️
Прикольно восстановили динамики .. быстро и просто , и не фиг их полностью разбирать и центрировать .. я бы еще конечно стенки колонки тонким параллоном бы укрыл чтоб звук не был таким гулким , пластмассовым ..
se debio de haber retirado todo el cono y no dejar mas que la bobina ,de ahi poner el cono nuevo.en mi opinion personal yo lo hubiera desmontado completamente .🔉🔉🔉🔉
*_The restored version looks absolutely splendid! I appreciate your hard work on restoring these items!_*
Iuyriiikl
2
Udaya🎵🎵🎶🎶👍👍✌️✌️
Приятно наблюдать за работой МАСТЕРА👍👍👍👍👍
TWEETERS ARE REAL, TYPE OF MUSIC, NOT DYNAMIC, BUT GREAT JOB **
sound is good 👍👍
😂😂😂😂😂😂😂😂😂😂
Fantastic and beatifull,restoration OK 💯💢💯™️🤗♥️
Nice❤️❤️
So good ii boss 👍👍😊😍
Amazing Restoration
I use that method to repair most of my speakers. And as always , a very good video.!
.
Vary vary good 😊😊👍🏻👍🏻😊😊😊
good work
Good!.👍👍👍
Nice job 👍 congratulations
The restored version looks nicer then before, may be if spectrum light can be added, it might look better. Thanks.
Nice done
Nice ✌👍
24:24 there is a cut in the video, hmmm also those frames had 2cables whatever reason, but those werent soldered back. (maybe leds)
I also found it odd that some cables were removed and was never pluged back.
Super 💥💥
မိုက်တယ် ပြင်လိုက်တော့ 👍👍👍
Cool😍🤩👍‼️
Excellent
🇧🇷He didn't even change the speaker coil! just put the cover over the old cover, that will bring a bad yield and on top of that it will cause future problems👏🏼 congratulations!
Sounds good
Việt Nam! Chào nhau cái anh chủ vd 😂
Great video but you never added any of the LED lights back which would of made the speaker way more cooler.
It's not a jbl boom box.
@@CRYDKE I never said it was a JBL speaker lol
Thank you teacher for your work
Always wait for your videos😍
fantastic job
Привет 👍🙂
Excellent work! Congratulations!
15:42 burnt hand 👏🏻 hahaha trying to hold that jack 😂
8 комментариев на русском. Очень классная колонка получилось😊
¡Buen trabajo!!!
I'm not convinced by that restoration.
For such a small thing im gonna say its powerful
yeah, he may have restored it but the clear pieces that go above the speakers was supposed to light up on it. then the metal mesh goes on top of them
youtube channel sensations
Eres un genio dando vida a las bocinas que ya no tenía vida
Le faltó conectar la luz led
Super 😁👍
So cool! 😂❤
Good job
Realmente ficou muito bom
Hello anh
That dude's coke nail is on point!
Buenísimo video 👌👍👍
😳🙂 que linda bosina 🔊 gracias por el video
Le dijiste a mi bocina
😂😂😂😂😂😂❤❤❤
quedo como nuevo saludos
Mister electrónico. hermosos son todos tus vídeos y ya de tu canal soy tu fans numero uno en mi país. me gusta hasta la música que le pones a tus vídeos, como esa ola ola y esa make you move. besos para tu persona y besitos para tus hijitos. desde CHILE....BIANCA ANTONELLA DI VANNI DI BIAGGIO, edad 27
Bravo
без подсветки 9 из 10
Very nice
Anh tua em nghe rõ😂
My favorite park
Show!
👍👍👍
All ready restoration😂
Que goma negra usas para pegar los conos de los parlantes
Muito bom pra bem pra você
Daca te conectezi la boxe speciale e puternic am boxa asta❤
Bhai itne scrap me sound system laate kaha se ho...
хорошая колонка
Great
Remplacing the rca connectors you changed the polarity (Red and white connectors !) Not good it seems because the circuit you welded behind is polarised. Very good videos as always. Tell me if am wrong
Top
Mấy cái nhựa này dùng khò nhiệt khò lại là là nhựa lại đẹp ngay. Đẹp hơn phun sơn
Nice work pls what is this Black paste on beetween woofer Membran pls tnx fine work take care from Germany
Ô a làm ở toyodenso à?
I look cool but not so cool I don't know if you noticed in the coils of the air gap that they are scratched and that generates a bad job for the coils and as for the cone if you are a technician in whatever you should leave the job at 100 that is starting from scratch I do not choose that it is a good job if it is a good job and you avoid disassembling it completely to be able to leave it at 100 but if it is more recommendable and highly recommended since I have also repaired speakers and I see several details of the speakers in this case the coils as they are physically yes They are not scratched or damaged. I'll explain your video selection work, it's only at 30%. Well, I hope you don't get mad, it's just an observation and I'll give you my opinion, regards ✌️
Combien coute le cone du HP ? .;What is the price of the cone speaker ? thx ;)
Прикольно восстановили динамики .. быстро и просто , и не фиг их полностью разбирать и центрировать .. я бы еще конечно стенки колонки тонким параллоном бы укрыл чтоб звук не был таким гулким , пластмассовым ..
❤❤
Use digital multimeter to show uss because this analog multimeter we didn't understand what ur checking 😅
wowwwwwww
se debio de haber retirado todo el cono y no dejar mas que la bobina ,de ahi poner el cono nuevo.en mi opinion personal yo lo hubiera desmontado completamente .🔉🔉🔉🔉
first
No , but i first
Hi, what do you use to unglue the speaker?
Acetone
What liquid are you using to melt the glue?
WASH WITH THE WATER HOSE, FASTER **
I watch watch it's Boy
Chevere
I ve read the rating written on the label: it says 15V 3A, does it means that the output rms power would be no more than 45w?
correct, these speakers are hilariously weak
На днях чимодан такой с ручкой нашел на колесах осталось только врезать туда динамики правда от теликов
5:55
What liquid did you use to remove the glue on the speaker
most likely izopropilic alcohol
Led not working
Nitpicking!
Buy new rgb leds then
Hater
@@keizer3452 does it look like I’m hating I’m not
Es buen tecnico en asia abundan los repuestos aca en Honduras no venden nada se arruina y ya🇭🇳
Ficou com uma batida boa, melhor que ele original.
🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉
He should've take apart the speaker and replace the Spyder instead of glueing the new cone on a old one
No hay cambio de bobinas. Lo principal.
👍
Теперь можно продать на алиикспрес
Esses alto falantes tem 12 polegadas?
LED lights are not working
He cut out and canceled it.☹
23:09
27:01 music name pls
21:30 ножки забыл
26:25 подсветка не работает
Sửa thế này cũng đang lên
А почему мембрану новую приклеили поверх старой? Тем более на герметик.? Так же будет потеря звука почти на 10%.
My only question is how did you get that? From a junkyard?