Now they look way better than I initially thought they would, it really is a cool looking mod to look into for my own ST. It's great when you can watch a video like yours and see the mods and if you like them before you go out and buy them =)
Top video George, been looking at doing the clocks for ages but thought it would be a bit of a faff and thought the dash would have to come out!! Turns out it looks far easier than I thought, or you make it look easy 😉
I need to know where that bloody key is from hahaha 😂 nearly a whole year of me wondering this haha. Great video and I am pleased someone finally done a bit of a tutorial on how to change these! All I need to do now is decide what style I want 😍😍 I like the longer hair, it suits you 😁
Another great mod and great vlog any chance next time you take the car out for a hooning session can you video your boost gauge so I can see how your car is boosting I still have boost issues it's been to Ford's now had a boost solenoid put on made no difference any help from any other st owners.Cheers
Two of my needles on my boost pod don’t light up at night - do I need to replace the whole unit ? Nice video btw - I’m all set to replace my rear lights after seeing your other video - gave me the confidence to do it myself !
Was your water leak not coming from the holes were the spoiler clipped in to the bodywork before you fitted the risers? I took of my spoiler after seeing your installation video with intentions of ordering the riser kit . But could see the potential problems of water getting in the car . Three little sticky pads won’t last long . And have you kept the bonnet risers ? I keep looking thing sic . Then I’m not so sure . Another fantastic mod video bud . 🤘🏻😎🤘🏻
Check your petrol gauge needle. Unless you went to fill up between your new dials it’s now reading higher with the new clocks in. Check start of video your showed and end of video and the gauge is sitting higher I believe
On a separate note your car doesn’t have a traction control button or a heated front windscreen.....thought these would be standard on all ST’s! So does your car actually have traction control then? Pic of a car with waivy lines behind it in the clocks would tell you.
No it's a gloss finish but can be ordered as a matt finish if you want. SAS Conversions are supplied by a company called Spinal Studios who create them and they offer different finishes...you can check them out on instagram... instagram.com/spinalstudios/
Green on black and red, sorry but we don't see anything now. It would be a good idea to make it look very clean like white background and red or black lines and numbers.
Why is there such a lack of features on the Mk2 ST? Half the things you haven't got are standard on the titanium Such a centre storage, heater windscreen, keyless ect ect.
BMW driver here watching this due to the lockdown, but what a tutorial! Very clear to follow for someone who wants. Well done.
That looks ace but that honeycomb would send my eyes loopy lol
Agreed
The honeycomb effect looks aces reminds me of the cav mk2 clocks back in the 80s
Yes! Been wanting to do this to the Focus for while but wasn't sure, this has swayed me! Great vid!
Hi I do not own a ford I owen a yaris sport but those parts u fitted to ur car there is amazing difference love them
Phil from stoke
Now they look way better than I initially thought they would, it really is a cool looking mod to look into for my own ST.
It's great when you can watch a video like yours and see the mods and if you like them before you go out and buy them =)
Great little mod that makes a big difference,best looking st on UA-cam 💪
Them clocks look absolutely brilliant
Love the clocks mate , keep the mods coming mate 👌
Top video George, been looking at doing the clocks for ages but thought it would be a bit of a faff and thought the dash would have to come out!! Turns out it looks far easier than I thought, or you make it look easy 😉
It’s easy bro just fiddly lifting the catches so that you can get inside the cluster :) thanks for the support my man. Big thanks x
Looks great in the dark 👍 nice job George 👍
Thanks pal
Next step is to change the green led which is behind the three air knobs with a blue one! I have done it myself and it’s super!
This helps going to change my boost pod as I am getting one witch shows up to 1.8 bar instead of 1.2 👌
Great vid, helps a lot as I'm about to fit my new custom dial set..
Another great job looks the nuts in the dark keep up the great work keep safe 👍
Good job mate. Glad to see you’ve used a hoover 👍🏻
Keep grinding mate, loving the vids!! Should have way more subs
Bro honestly comments like this make
Me so happy. I’m glad you see the value too bro. Thanks :)
No worries at all dude :)
I need to know where that bloody key is from hahaha 😂 nearly a whole year of me wondering this haha.
Great video and I am pleased someone finally done a bit of a tutorial on how to change these! All I need to do now is decide what style I want 😍😍
I like the longer hair, it suits you 😁
Another great mod and great vlog any chance next time you take the car out for a hooning session can you video your boost gauge so I can see how your car is boosting I still have boost issues it's been to Ford's now had a boost solenoid put on made no difference any help from any other st owners.Cheers
Two of my needles on my boost pod don’t light up at night - do I need to replace the whole unit ?
Nice video btw - I’m all set to replace my rear lights after seeing your other video - gave me the confidence to do it myself !
Where did you get the dials card Gearge..??🙌👌👌
Was your water leak not coming from the holes were the spoiler clipped in to the bodywork before you fitted the risers? I took of my spoiler after seeing your installation video with intentions of ordering the riser kit . But could see the potential problems of water getting in the car . Three little sticky pads won’t last long . And have you kept the bonnet risers ? I keep looking thing sic . Then I’m not so sure . Another fantastic mod video bud . 🤘🏻😎🤘🏻
Sick little mod’s mate. ✌️
Check your petrol gauge needle. Unless you went to fill up between your new dials it’s now reading higher with the new clocks in. Check start of video your showed and end of video and the gauge is sitting higher I believe
True, it gained a 8th tank after the new dials went in ..
Cool mod 😎 good vid 👍🏼💪🏻
How much was it for both gauges mate?? And how long was delivery??
Oh yes sick like them George 😁
Love the new dials 😜
We're did you get your egnition cover? And the new clock Cover looks awesome
Mate good work. Can I ask where you got the silver switches from and what radio your using. Cheers dude. Keep up the great videos.
missed this one look right They do G :) topman
How much do they cost🤷♂️ another great video 👍👍 keeping me happy in quarantine 🤷♂️👍🤷♂️
Looks mint bro
next video - everything not modded on my car would be a shot one too hahahah love the st
Love the vids bro
Where did you get your carbon fibre surround bits for the air vents?? Looked for them everywhere!!! Car looking sick mate 🙏
Mk customz bro I have a whole video on it
@@GCMYT have you got a link to the video mate? Thanks
Found it mate thanks
Ali express do them
I had two mk2 ST’s from new an 05 and a 10 plate and both of them leaked into the boot from the passenger side tail light.
On a separate note your car doesn’t have a traction control button or a heated front windscreen.....thought these would be standard on all ST’s!
So does your car actually have traction control then? Pic of a car with waivy lines behind it in the clocks would tell you.
I'm guessing its the differences between ST-1, ST-2 and ST-3. To Google.
Would save having to turn the twat off everytime you start up 😁
go blue with it all now i have same headlight switch on ebay blue led £20
Looks good but honeycomb hmmm not sure .... either way good job mate
Also mate, is there a gloss skin on there that requires removing to give you a matt finish ??
No it's a gloss finish but can be ordered as a matt finish if you want. SAS Conversions are supplied by a company called Spinal Studios who create them and they offer different finishes...you can check them out on instagram... instagram.com/spinalstudios/
Looks good
Green on black and red, sorry but we don't see anything now. It would be a good idea to make it look very clean like white background and red or black lines and numbers.
Those lights look sick mate u really have got balls doing that I wouldn't attempt it I'd break something love my car porn
Will we send this product to Turkey
Can you plz show us what the auto headlights do cuz I’m looking to get an st
Auto headlights just turn on when it gets dark no? I have them on mine.
did your car come with the carbon dash or can you get them
How much do they cost? Where did you buy them?
Look on vid bio dude
siiiiiiiiiiiick
I think those harnesses need to cross over mate 👍
I’ll do that now
@@GCMYT 👍 . Great lookin motor by the way. And you've got more guts than me to take those needles off. Respect!!!!!!
How to set those needles back ;_; All of those 3 looks so wrong in my car
Were did you get the speed dial from please m8
do you have a link to these plz
Why is there such a lack of features on the Mk2 ST?
Half the things you haven't got are standard on the titanium
Such a centre storage, heater windscreen, keyless ect ect.
they must have prioritised the engine and not cared for interior mods :D
good job - but these custom dials in glossy finish... ...cause very disturbing reflections.
Link??
Were did you get the blue lights from please m8
Title in the video screen says 'Focus GT'... 🤔
Dommage que tes vidéos ne soit pas sous- titré en français 😥
Bolts,Glass
Screws,Plastic
Deffo not a poverty spec now. I have a facelift st3 and it looks poverty spec compared to your beast 😂
😂😂😂💙
going too far. keep it subtle and nice