I made similar ones using 25 sq mm or 4 gauge welding cables. And 4 earth clamps. The clamp handle parts have to be covered with insulation tape to avoid getting accidently shorted to each other. Total cost ₹ 2550.
Great information Sardar ji with comparison also. 100 % useful video. I got all the information needed for making a jumper cable. Thanks a lot for making this. Very useful. Please keep it up God bless
Nai bhai ye wires burn off ho jayengi and they will not be able to carry enough current for starter motor but yes it will work in scenarios where you jump through battery and length of wire will be very less and car battery is not that much low.
You’re right bro, but the alligator clamps available in the market are way worst than I expected and these earthing clamps are of very good quality. That’s why I choose to use these clamps.
As per standards, you need to keep length at least 4 meters because if your car parked in the garage and you need to jump start it from car behind then you need at least 4 meter of length needed. Now here is the catch, if you increase the length of wires then you need more thick cables otherwise you can use 16sq.mm. if length is up to 2 meters.
Thanks for you comment sir. A 35 sq mm welding cable can carry a continuous current of 240 amps. I have used 35sqmm welding cable or you can say 2 guage welding cable
Anything is possible but I don’t think so that you can make jump starter out of power bank as there is lots of amps needed for starter motor. But you can try for DIY, you will definitely get solution. Thanks
These thin cables are made to use with AC supply or low current conditions. You can make these cables work with short length only. Otherwise it will burn off immediately. DC supply is current intensive and starter motor needs huge amount of current so these cables will not solve your purpose. Anyway you can try with 10 sq.mm.
Sardar jee. Kya Ghar mein jo hum wire use kartey hain. COPPER WIRE JO ghar ki wiring mein use hoti hai. 7/44, full gauge, ya 12 MM, kya us se jumpstart hosakta hai?😊
No, it will burnt off. You can use it but length should be as short as possible because voltage will drop as length increases. In short, it will work if you jump start using another battery.
True, but if you need more length then you have to increase on gauge. I tried with crocodile clamps but getting very cheap quality so I chose on these clamps.
Very useful & Wonderful explain bro.
I made similar ones using 25 sq mm or 4 gauge welding cables. And 4 earth clamps. The clamp handle parts have to be covered with insulation tape to avoid getting accidently shorted to each other. Total cost ₹ 2550.
I think it's the best option to made jumper cable like this due to flexibility and high performance
Very goood info sir ji
Thanks bhai 👍
Great information Sardar ji with comparison also.
100 % useful video. I got all the information needed for making a jumper cable.
Thanks a lot for making this. Very useful. Please keep it up
God bless
Thanks bro, keep supporting
Very good information
Thanks bro 👍
Good information
Thanks bro
Veer ji jo wire ghar mn use hoti hy. Wiring k liye 3/29 ye hum jumper mn use kr saktay hn yaa nhi. Yaa phir jo wite 7/36 is type ki wire.
Nai bhai ye wires burn off ho jayengi and they will not be able to carry enough current for starter motor but yes it will work in scenarios where you jump through battery and length of wire will be very less and car battery is not that much low.
Helpful
Glad it helped
Sardar ji aapne bhut zbrdst kaam kiya h...bs ek correction h ye belding earthing clamp h battery charge krne iski zarurat nhi pdti
You’re right bro, but the alligator clamps available in the market are way worst than I expected and these earthing clamps are of very good quality. That’s why I choose to use these clamps.
Wagon r ke liye kitne mm ki wire use karna chahiye copper me ? Aur length kitni rakhna sahi rahega
As per standards, you need to keep length at least 4 meters because if your car parked in the garage and you need to jump start it from car behind then you need at least 4 meter of length needed. Now here is the catch, if you increase the length of wires then you need more thick cables otherwise you can use 16sq.mm. if length is up to 2 meters.
Wa sardar ji sare confusion door kr deta bus ina dus dyo kina aph ki wire ho
Thanks for you comment sir. A 35 sq mm welding cable can carry a continuous current of 240 amps. I have used 35sqmm welding cable or you can say 2 guage welding cable
Swift deasel car keliye kithna mm chayiyrr sirji?
Atleast go with 25sq.mm.
I have used 35 sq.mm for my car and it worked effortlessly
Is it possible to make a portable jumper like 70mai Jump Starter ???
And i want to use power bank as a battery
Anything is possible but I don’t think so that you can make jump starter out of power bank as there is lots of amps needed for starter motor. But you can try for DIY, you will definitely get solution. Thanks
5:18 links not provided.
I have added all the links, please check in description 👍👍
Baleno car ke lie kitne mm sahi rahega. 6mm ya 10mm
Bhai Jitni thick hogi utni hi achi rahegi. Length Choti rakhoge tabhi kam karengi ye wires otherwise start nahi kar payengi ya to jal jayengi
भाई मेरे पास 6 mm ओर 10 mm केबल है तो कोनसा अच्छा रहेंगा 9 ?
These thin cables are made to use with AC supply or low current conditions. You can make these cables work with short length only. Otherwise it will burn off immediately. DC supply is current intensive and starter motor needs huge amount of current so these cables will not solve your purpose. Anyway you can try with 10 sq.mm.
Plz share product links
KEEAN EARTH CLAMP WITH STEEL... www.amazon.in/dp/B074J1RW5X
Wire = 35sq.mm. Copper welding wire
Wire terminals = 4 battery wire lugs
Heat shrink = black and red
All these products I purchased offline
Very informative video paji, aage bhi aise hi informative video bnate reho bhai or ye cable kitne mm ki h or kis price rate me mili bhai ?
Thanks bro, ye cable 35 sq mm ki hai and 1800 ki padi thi 8 metre. You can get it from any hardware store. It is welding cable.
Sardar jee. Kya Ghar mein jo hum wire use kartey hain. COPPER WIRE JO ghar ki wiring mein use hoti hai. 7/44, full gauge, ya 12 MM, kya us se jumpstart hosakta hai?😊
Kam chal sakta hai but apko length kam se kam rakhni padegi otherwise proper voltage and current nahi milega starter motor ko.
Superb veerji.. Can you make another one for me? I will pay you
Sorry bro, this service is not available 😂😂😂
But you can find good one in local market
I think it is better to buy from Amazon because it is much cheaper and easier.
Yes, it is cheaper but make sure to buy appropriate one otherwise it will not work in emergency situation when you actually need it.
Bhai car ke liye 6mm ki copper cable use ho skti hai jumper ke liye?
No, it will burnt off. You can use it but length should be as short as possible because voltage will drop as length increases. In short, it will work if you jump start using another battery.
Kitne meter ki wire hai ?
I took 8 meters, and cut into half. Final product will be 4 meter long.
Bhai contacter khan milega
You can get it on Amazon, or you can get earthing clamps for welding sets on any hardware shop.
car keliye bahut jyada heavy duty hai, unless you have heavy vechiles.
True, but if you need more length then you have to increase on gauge. I tried with crocodile clamps but getting very cheap quality so I chose on these clamps.