OLED mod for Radiomaster Pocket
Вставка
- Опубліковано 29 сер 2024
- Firmware and all info for mod :
github.com/Don...
1.54" OLED :
www.aliexpress...
Adapter board : 0.5mm pitch, 12pin.
www.aliexpress...
film cable : 0.5mm pitch, 5cm length, 12pin, same side contact.
www.aliexpress...
music : BGMer
bgmer.net
Bro, i ordered my pocket, and as soon as it arrives i’m doing this mod, that’s awesome!
Good Luck for mod!
Noice!!! Man you make me want this radio even more with this Mod!!!
Thank you!
Good luck for mod!
Looks awesome, thank you for sharing!
Thank you!
Can I use a 1.3" or 1.4" OLED screen?
Can OLED screens with built-in I2C be used?
The mod code can be used for ELRS and CC2500 versions, right?
Check the OLED driver. The OLED should be compatible with SSD1309 and SPI interface. I2C is not supported. The display is independent of RF system.
Great job well done!! Please make a mod that use normal size screen for example from tx16s that we can attach externally using fpv screen bracket. It's going to be useful options for fixed wing pilot using Yaapu or Inav telemetry. Thanks!
Thank you!
Good idea, second screen is somewhat technically different thing. I'll think about it.
Nice mod idea, but wouldn't it just destroy the interests of the pocket ?...
@@un_ours_blanc it's a mod. Option that people can make. How often that people that have it put in their pocket. It just a name to tell the size. If I want bigger screen yes I can go for tx16s OR I can just buy a 6usd lcd (for car reverse monitor) that is compatible. 😘
@@skelethornbro don't worry, I got that the "pocket" is just marketing, even though it actually fits in more pockets than you could think, but a tx with that small gimbals has a specific interest for having such small ones
Does the contrast setting do anything with yours? I think the oled I built into my Boxer could be brighter.
At 2.9.0, brightness control is available. And I dig in the OLED drive circuit for more brightness. :-)
github.com/DongkwanYi/OLEDBOXER/tree/main/firmware
Very well done!!
Thank you!!!
Can i use 1.3" OLED screen? It have the SH1106 driver 128x64 res, adafruit module with SPI interface. If i can, do you have, or can you write me the steps? Please? And why do you use the lcd backlight? Isn't OLED don't need a backlight? Thank you in advance
I'm not sure about that. The reason for leaving the backlight is for cosmetic reasons.
@@celeselements thank you for replying. just to clarify what are you not sure about? Is it the driver compatibility, or the screen size and res?
Driver compatibility. Original BW screen is equipped with ST7567 or compatible. First of all, check the compatibility between the two drivers(ST7567 and SH1106). If the two drivers are compatible, there is no need to create new firmware.
@@celeselements so if the driver is compatible then I can just flash the firmware, then connect the OLED screen via SPI, is this correct? Also if I update the edge tx firmware will it affect the OLED firmware?
@@celeselements and can you please write me what pin goes to what pin in adapter board?
dude !! do you understand yourself while talking ?
Hi, Many thanks for your presentation. Have connected a 2.42inch OLED with the same resolution but I broke cable to the LCD when I worked with the radio. Have ordered new LCD display. Do not know how to get the OLED bin file loaded when I have no display. Next question is how to return to original LCD software if my OLED does not work. Can you help with advise?
Hi, I'm sorry for late reply.
I make new video for mod, It's same as pocket.
You seem to be having trouble updating the firmware.
Check it : 6:17 at ua-cam.com/video/LZEmpTxd5Lc/v-deo.html
Wow nice, btw where to get those template in your pocket telementry
Thank you,
Telemerty LUA : github.com/iNavFlight/OpenTX-Telemetry-Widget/releases/tag/v.2.2.3
do you think it is possible to do this with a Full color tft oled screen? It would be really cool to have a tx16s type screen on a Pocket, especially with touch, I saw some very cheap screens on aliexpress
Oh, It is very different matter. I think it would be better to make a small version to the tx16s.
super, you're cool, but can you do the same only with the first version of jumper t pro, which has a simple display?
Thank you, I'm not sure about that and I don't have first version jumper T pro, but I think it's possible without firmware mod. Jumper T-pro has 1.3" screen, if you replace 1.3" OLED, it will work. Take care wiring.
Nice.Can this work on Radiomaster zorro?
Yes. I already upload firmware for Zorro.
But I don't have Zorro, so I didn't tried yet.
github.com/DongkwanYi/OLEDBOXER
(at firmware folder, you can find firmware for Zorro)
sombody modded it and found no way to close oled light display even the brightness set to 0, any method to solve it ?
I'm trying to find a solution. It seems possible.
Hello. Good job!!!
I decided to follow your lead... all assembled. Now I just need to unlock the bootloader and upload the firmware file. But I don't know how to do it... Please help me.
Please follow this instructions : github.com/DongkwanYi/OLEDBOXER/blob/main/how_to_flash_firmware
firmware for pocket : github.com/DongkwanYi/OLEDBOXER/tree/main/firmware
All infos are here : github.com/DongkwanYi/OLEDBOXER
@@celeselements
Thanks a lot.
I have 2 more questions...
Is it possible to check the OLED module for functionality? why do you have tin on the fifth pin on the board FPC-12p??
My code for OLED is included SSD1309 display driver. So SSD1309 display driver or compatible that adopted for OLED, that is available.
Fifth pin is not use. Tinning on that pin is meaningless.
@@celeselementsI did it all!!! Thank you so much!!!❤❤❤
Nice...
Thank you!
good 💪💪
thank you!
hello friends, my LCD has a screen mirror. Can you make more firmware for the one that doesn't mirror the screen? please help me guys.
I use a 1.3 inch Oled V2.0 LCD, Branded by Adafruit Industries
github.com/DongkwanYi/OLEDBOXER/tree/main/firmwares
Check README and firmware!!!
@@celeselements thank you my brother I will try it.
@@celeselements For OLED Pocket there are 3 updated models. and the first thing I tried to flash was using the model with the screen upside down. and I tested the function. the problem remains, namely the screen remains upside down with no change. and I tried flashing the other two firmwares. the problem persists. please help my friend.
I'm sorry it didn't work. There's no way I can help you any more now.
Buy a new OLED and try it again.
ko.aliexpress.com/item/32971511348.html?spm=a2g0o.order_list.order_list_main.49.54711802A8Afsy&gatewayAdapt=glo2kor
Hi, can this tutorial be successful by just following your video? Coincidentally, I want to replace the LCD for my Radiomaster Pocket Remote. or you have to follow the tutorial in the link in your description, such as creating a Gitpod for compilation. and others
Yes, you can do it. I uploaded firmware for Pocket. You don't need to compile it.
I uploaded everything for mod at my github and youtube vid.
@@celeselements I have installed it but the screen display is upside down, what's wrong?
@@celeselements hello friends, my LCD has a screen mirror. Can you make more firmware for the one that doesn't mirror the screen? please help me guys.
@@celeselements I use a 1.3 inch Oled V2.0 LCD, Branded by Adafruit Industries
@@GarengPetruk Please wait a few days. I'll find a way.
is there an oled screen that is the same size?
The OLED shown in the vid is 1.54".
@@celeselements I know but it is oversized, is there one that matches the original available? could I use one that matches instead with the firmware?
I cannot find OLED that exact same size. So I moded front shell.@@_google_user_
@@celeselements okay thanks im going to try to find one the same size thanks for tutorial
@@celeselements is the stock screen diameter .96 or 1.3 ? my pocket radio is in the mail..
Would a 1.30 oled display be better?
The OLED shown in the vid is 1.54". Choosing a small OLED is solely your preference. Choose SSD1309 driver OLED.
@@celeselementsCan the SSD1306 OLED driver be used?
@@GarengPetruk I didn't tested, but as i know, SSD1306 is compatible with SSD 1309. Please check it!
@@celeselements I have one more question. Is the OLED screen you are using SPI? if true how to connect SPI to 12ic
Can this work on jumper t pro?
I don't have Jumper T-pro, but I think it might be possible to modify it.
@@celeselements You're great💪.. I'll order the material if I need it I'll contact you..😁
OK, ask me anything about this mod.
@@celeselements thanks man
did you succeed on Jumper t pro?
Can we do the same on TBS Tango II? Please guide. 😁
As far as I know, it's not open source and I think it would be difficult to modify.
but... its already oled
can this library work for ssd1116?
I don't know much about SSD1116.
Do you mean SH1106?
SH1106 lib has original EdgeTX firmware.
ssd 1116 and sh 1106 same@@celeselements
@@badtrip_fpv also interested in ssd1116
mod oled jumper t lite please
Sorry, I don't have the radio.
You should be able to mod it by referring to my mod.
@@celeselements No problem. Thank you.😀