Thank you. I'm about to get a jd 350 on loan to do some work at home. It's been years since I last operated a dozer. Your video will make the job easier to start with. The rest is up to me. When I'm finished here I'll be happy to help with your yard.
Looking at getting a 350C so thanks for the great video, especially since I’ve been a mechanic for years so will be doing my own work that was very good info
Thanks so much, i got a 350C and i didnt know that the power disengaged to the tracks at half pull on the steering handles. So good to know when you need to do some precise turning and grading. i do only my own land but every time i use it i hopeflly get better and better. this is so helpful!!
I personally own 6 of these and had absolutely no clue how to use them. I sold my house for these tractors and my wife left me because of my purchases.
Great video. Very helpful. With your knowledge from being a mechanic could you share somethings to keep a eye on when looking to purchase a john deere 350c? Thank you for your help.
Dont let this distract you from the fact that Gru is the most powerful being in the universe and here's why: Gru is 4 minions tall, which means he is a godly size of 14 feet tall. Furthermore if any of you remember the original Despicable Me, you know there is a scene when Vector kidnaps the three girls and shoots a series of heat-seeking missiles at Gru, he then dodges them all. According to the speed of an average ballistic missile (1900 mph) and the size of the missile according to his ankle size, Gru can perceive and move at such a speed that the missiles only move 9.5 miles per hour, 0.5% of their original speed. After this Gru punches a shark and it is paralyzed meaning its spine is probably shattered, to remind you it would require a force greater than 3,000 newtons to fracture the spine. That’s equal to the impact created by a 500-pound car crashing into a wall at 30 miles per hour. I rest my case.
I’ve got a 450 crawler (not sure of model letter) that looks a bit older than the one you’re showing. Do you know if the older models didn’t have a decelerator pedal or is mine just missing? To give you an idea, I don’t have the 4 speed trans like the one you showed. My forward and reverse selector are behind the steering levers between the legs. On the left side “arm rest” is another selector for forward and reverse however both of my selectors are just straight forward and back. I’ve got reverse, neutral, low and high on the floor selector but have no idea what the left selector is for. Could you give me any advice? I wish I could show you some pics. Any advice would be greatly appreciated my friend. Thanks for the video!
Thank you. I'm about to get a jd 350 on loan to do some work at home. It's been years since I last operated a dozer. Your video will make the job easier to start with. The rest is up to me. When I'm finished here I'll be happy to help with your yard.
Looking at getting a 350C so thanks for the great video, especially since I’ve been a mechanic for years so will be doing my own work that was very good info
Thanks, just bought one of these. First crawler I've owned so this video helps a lot!!
Thanks so much, i got a 350C and i didnt know that the power disengaged to the tracks at half pull on the steering handles. So good to know when you need to do some precise turning and grading. i do only my own land but every time i use it i hopeflly get better and better. this is so helpful!!
Great video. Thanks for posting this
Thank you so much!!! Super helpful!
I personally own 6 of these and had absolutely no clue how to use them. I sold my house for these tractors and my wife left me because of my purchases.
That’s tuff, but I don’t remember asking
Really great video!!!!
Great video. Very helpful. With your knowledge from being a mechanic could you share somethings to keep a eye on when looking to purchase a john deere 350c? Thank you for your help.
I own jd 350's and 450's back in the 70's early 80's never seen a deceleration or accelerator pedestal on any of them
Dont let this distract you from the fact that Gru is the most powerful being in the universe and here's why: Gru is 4 minions tall, which means he is a godly size of 14 feet tall. Furthermore if any of you remember the original Despicable Me, you know there is a scene when Vector kidnaps the three girls and shoots a series of heat-seeking missiles at Gru, he then dodges them all. According to the speed of an average ballistic missile (1900 mph) and the size of the missile according to his ankle size, Gru can perceive and move at such a speed that the missiles only move 9.5 miles per hour, 0.5% of their original speed. After this Gru punches a shark and it is paralyzed meaning its spine is probably shattered, to remind you it would require a force greater than 3,000 newtons to fracture the spine.
That’s equal to the impact created by a 500-pound car crashing into a wall at 30 miles per hour. I rest my case.
📠
so if the tractor is tacking left all the time its cuz the steering clutch friction discs are worn ?
Does your machine have a diesel or gas engine? Did they come with both? Thanks
I’ve got a 450 crawler (not sure of model letter) that looks a bit older than the one you’re showing. Do you know if the older models didn’t have a decelerator pedal or is mine just missing? To give you an idea, I don’t have the 4 speed trans like the one you showed. My forward and reverse selector are behind the steering levers between the legs. On the left side “arm rest” is another selector for forward and reverse however both of my selectors are just straight forward and back. I’ve got reverse, neutral, low and high on the floor selector but have no idea what the left selector is for. Could you give me any advice? I wish I could show you some pics. Any advice would be greatly appreciated my friend. Thanks for the video!
My left lever works perfectly. The right not so much. Actually sporadic. Any ideas, help.
Thanks
I agree with poop poopy
I never seen a 350c with a Decelator. The pedal on the left should be an inching clutch.