I learn so much from these videos ngl, I’m debating on doing all the things your doing just in a black car. With a little more time and money I wanna pull my heads and do exactly what you’re doing. Still gotta find that intermittent misfire tho, still confused by that one.
@@The3800Daily mostly when it’s higher up in operating temp, higher rpm’s, and when I down shift, I’ve gone through the entire ignition system and my fuel system, all my sensors check out, fixed the vacuum leaks. And 0 codes
@josephvalberg5816 try swapping back to stock coil packs. You shouldn't need them until ur pushing alot of boost. Some people have had bad luck with them. U may be the few that have.
Question. It is recommended to lap the valves that arent leaking (lightly) for cleaning purposes? I would have to have it all pull out just to address the ones leaking, put it all back together and in and then a while later the good ones start leaking cause it finally was enough?
Of course you can! Most definitely lap valves that are not leaking. That's called preventative maintenance. If you noticed, I lapped all the valves, even the ones that weren't leaking in the first place. 👌
Love the video man! Im excited for me to have a back up car so i can start rhis process, and learn the 4t80e swap with ya 😂 also man, just saying im still up for that giveaway, 😂 horsepower is expensive, and ill bug zzp if i needa for a new rocker 😂, but id love those valve springs man!
i mean yeah its a good way to find a leak but lapping with a drill isnt for beginner builders use the wooden lappin stick that has multiple size rubber cups on them and build up lappping over mulyiple attepts not all in one shot because of the chance to mess up the seat or over do the depth...
This compound is mainly for removing carbon contamination from the valve seating. It's not abrasive enough to really cut into the valve seats enough to make depth changes
Hello dear, We have been watching your UA-cam (The 3800 Daily) channel videos for a while now . your video quality and content is perfect and effective. You have subscribers And you are giving regular uploading videos. But your video views are not increasing. We found some problem due to which your channel videos are not going viral. Your videos is not properly SEO/Video Tag optimized. We can speak as digital marketers. If you fix it, your channel's video views will increase. Best Regards
![Save Money And Lap Your Own Valves! [Measured Results]](/img/n.gif)
Nother good video. I know nothing about motors but I'm learning watching ur videos.
I'm thrilled I can supply you the knowledge! If there's anything I can do better to make things easier to follow, please let me know!
Hey man! You might be able to contact ZZP and get 1 of the 1.9 rockers/pedestals/bolts replaced. They have done that for me with lifters in the past.
I appreciate it! I may just leave that to whoever wins them. I some much parts coming and going to/from them atm.
@@The3800Daily Ill take em!! lol. How do you enter...?
Just like the video, be subscribed, and u already commented!
@@The3800Daily nice
Love the videos man I am getting what is involved with some of the projects I have for my Grand Prix this summer. Appreciate it
Thanks and your very welcome! I'm glad I can provide something to help in your future project!
Great presentation. Will be working on a 4 cylinder head soon. Would like to know how much air pressure you use to check for bubbles.
Hey man, thanks a bunch!
I used about 85 PSI. You can always go a little bit higher.
I learn so much from these videos ngl, I’m debating on doing all the things your doing just in a black car. With a little more time and money I wanna pull my heads and do exactly what you’re doing. Still gotta find that intermittent misfire tho, still confused by that one.
I'd love to help u find that misfire. Do you have an engine code to go with it? And when does it misfire?
@@The3800Daily mostly when it’s higher up in operating temp, higher rpm’s, and when I down shift, I’ve gone through the entire ignition system and my fuel system, all my sensors check out, fixed the vacuum leaks. And 0 codes
@@josephvalberg5816 any modifications?
@@The3800Daily zzp coil packs, zzp downpipe into a 2 inch straight. More cosmetics rn more then anything
@josephvalberg5816 try swapping back to stock coil packs. You shouldn't need them until ur pushing alot of boost. Some people have had bad luck with them. U may be the few that have.
For a novice a manual valve lapping stick would be the safer option imo
I don't disagree
Question. It is recommended to lap the valves that arent leaking (lightly) for cleaning purposes? I would have to have it all pull out just to address the ones leaking, put it all back together and in and then a while later the good ones start leaking cause it finally was enough?
Of course you can! Most definitely lap valves that are not leaking. That's called preventative maintenance. If you noticed, I lapped all the valves, even the ones that weren't leaking in the first place. 👌
Love the video man! Im excited for me to have a back up car so i can start rhis process, and learn the 4t80e swap with ya 😂 also man, just saying im still up for that giveaway, 😂 horsepower is expensive, and ill bug zzp if i needa for a new rocker 😂, but id love those valve springs man!
Dude is killing it
Man I appreciate it dude! 💪
i mean yeah its a good way to find a leak but lapping with a drill isnt for beginner builders use the wooden lappin stick that has multiple size rubber cups on them and build up lappping over mulyiple attepts not all in one shot because of the chance to mess up the seat or over do the depth...
This compound is mainly for removing carbon contamination from the valve seating. It's not abrasive enough to really cut into the valve seats enough to make depth changes
Cool video
Hello dear,
We have been watching your UA-cam (The 3800 Daily) channel videos for a while now . your video quality and content is perfect and effective. You have subscribers And you are giving regular uploading videos. But your video views are not increasing. We found some problem due to which your channel videos are not going viral. Your videos is not properly SEO/Video Tag optimized. We can speak as digital marketers. If you fix it, your channel's video views will increase.
Best Regards
I appreciate the advice. I'll do some research into it and better my video tags!
can i help you.
@@DinaAdsGrower I really appreciate your reaching out, but unfortunately, my channel isn't in the position to pay for outside sources.
@@The3800Daily I don't have to pay any fee now. I will SEO your video for free. You see the result.