How To Assemble & Install The ETHOS Folding Wall Rack | Using 360 Self Leveling Laser DIY
Вставка
- Опубліковано 6 жов 2024
- How To Assemble & Install The ETHOS Folding Wall Rack | Using 360 Self Leveling Laser DIY
Join this channel to get access to perks:
/ @masteringmayhem
🚨🚨🚨👉 Official Giveaway Entry Video For Saturday Night Mayhem 3rd Quarter LIVE Power Tool GIVEAWAY -- • Video 👈🚨🚨🚨
redcircle.com/...
redcircle.com/...
To see the latest merchandise and to contact us check out our website
www.masteringm...
If you like custom pocket knives and want to see how this is done, check out my brothers UA-cam channel here: / @knathansknives
👉 Links below are affiliate links. If you buy something through this link I may get a small share of the sale. ❤️ (Always check links for most current prices)
Amazon Ethos Foldable Wall Rack
amzn.to/2VtLXt2
CIGMAN 3x360° Green Laser Level Tool Self Leveling 100ft for Construction and Picture Hanging, Remote Controller, Magnetic Rotating Stand and Type-C Charger Included
amzn.to/2Vt6duS
Teeter FitSpine LX9 Inversion Table
amzn.to/3r1kUAT
DEWALT 20V MAX Cordless Fan for Jobsite, 11-Inch, Tool Only (DCE511B) - $81.02! Lowest Price I've Seen!
amzn.to/2TbFvpX
Metabo HPT Cordless 18V Drill and Impact Driver Combo Kit | Sub-Compact | Brushless Motor | Lithium-Ion Batteries | Lifetime Tool Warranty | KC18DDX - $160!!
amzn.to/3jv8pvH
Bosch GBH18V-20N 18V 3/4 in. SDS-plus Rotary Hammer (Bare Tool) - $108.90
amzn.to/3jvN5GD
Metabo HPT 18V Cordless Hammer Drill | Includes Two Batteries | 1-36V/18V Multivolt 5.0 Ah & 1-18V Compact 3.0 Ah Battery | 1/2" Keyless Chuck | 620 In/Lbs Turning Torque | DV18DBFL2T - $140!!
amzn.to/3AelvUb
LOWE'S BOSCH 18-Volt 6-1/2-in Cordless Circular Saw With Free 4AH Battery Kit - $119!!
low.es/3dscCwe
LOWE'S DeWALT 20-Volt Max 6-1/2-in Cordless Circular Saw Bare Tool - $99!
low.es/3h4M7zc
ACME Tools DeWALT 20V MAX XR 3-Speed Cordless Oscillating Multi-Tool Kit DCS356C1
imp.i284638.ne...
DeWALT XTREME 2-Tool 12-Volt Max Brushless Power Tool Combo Kit with Soft Case (2-Batteries and charger Included) - $149!!
low.es/3xbnhU4
LOWE'S Buy One Get One Free Deal On 20 Tools!
low.es/36fM6Tb
Ace Hardware Craftsman Assorted S X 3/8 inch drive S SAE 6 Point Standard Socket Set 10 piece - $10 For Members $12.99 For Non-Members
bit.ly/2TbK2IZ
Ace Hardware Craftsman 26.5 inch 5 drawer Metal Ball-Bearing Tool Center 45.5 inch H X 14 inch D - $100 For Members $119 For Non-Members
bit.ly/3qx1G64
Norther Tool + Equipment Gift Card DEAL!
www.northernto...
Home Depot RYOBI 40V Brushless 20 in. Cordless Battery Walk Behind Push Lawn Mower with 6.0 Ah Battery and Charger - $249 New Lowe Price!
thd.co/3A9UXmV
Home Depot RIDGID 18V Compact Cordless Blower Kit with (1) 2.0 Ah Battery and Charger - $79!!
thd.co/3hmGtYa
K Tool International KTI (KTI-22093) Ratchet - 64% OFF @ $21.76!!
amzn.to/3y7wcG9
WalMart Pulsar 12,000W Dual Fuel Portable Generator with Electric Start, CARB Approved - 42% OFF @ $859!
bit.ly/3qDQsNg
Nightstick XPR-5560G Intrinsically Safe Cap Lamp - Rechargeable, Green - $81.37!!
amzn.to/2SzdO9Y
Try Amazon Prime 30 Day Free Trial
amzn.to/35WbBsx
Try Prime Wardrobe
amzn.to/3zKNomv
Try Audible Plus
amzn.to/2SWtLqS
Try Personal Shopper By Prime Wardrobe
amzn.to/35Hcq8f
Create Amazon Business Account
amzn.to/3j1erUQ
Try Prime Discounted Monthly Offering
amzn.to/2SVn48H
Kindle Unlimited Membership Plans
amzn.to/3iWGfcR
Give The Gift Of Amazon Prime
amzn.to/2TNY0Ay
Join Amazon Family 30-Day Trial Free
amzn.to/35Mr268
Join Amazon Prime Music - The Only Streaming Music With Free 2 Day Shipping - 30 Day Free Trial
amzn.to/3d14jHC
Join Amazon Prime - Watch Thousands Of Movies & TV Shows Anytime - Start Free Trial Now
amzn.to/3xH4YG4
Prime Student 6 Month Trial
amzn.to/2Up1D0a
Create An Amazon Registry
amzn.to/3zN9tks
►This track: inaudio.org/tr...
Join our community: bit.ly/38egfRR
"Heroes" is 100% no copyright background music (royalty free)!
This track on Spotify: open.spotify.c...
You can use this track for any projects and monetize it.
#masteringmayhem #ethossquatrack #homegym
THIS VIDEO MADE ME FEEL GUILTY FOR NOT WORKING OUT!!! LMBO 🤩😁😄
Nice install. This video cost me over $100 because I immediately ordered that Cigman laser level. I really need to be in the winner’s circle on tonight’s giveaway. Lol.
Nice and clean install.. the reason the Rogue doesnt have the adjustable levelers at the bottom is because their brackets are made with some vertical allowance. This way, the rack is set up as intended, and the large square tubing will support all the weight. Like its supposed to. Those levelers are hardly strong enough for any decent amount of weight. What I’d recommend doing is pre assembling the swing out sections and loosely thread the bolts and pins to the wall brackets. Stand them where it’ll be used. Then measure up from the floor for your stringer height. Like you said, most garages are sloped. This will account for the leeway you will need when open and stored. Then you can toss those levelers in the garbage or leave them. Your choice.
Thankyou for taking time for this! Gracias
Thanks MM for your information 👍and video 👍📹I appreciate you
Diy in west is very easy everything is pre built my last rack I have installed I had to build it from scratch
Do you think this could be fully assembled and mounted to the wall after?
Great installation! Still shocked how many people in Texas have epoxy floors in their garage 🤓👍
What do you think of those floors? I tried to get my uncle to install one, but we ended up putting in a floating checkerboard floor. In his youth he lived the American Graffiti lifestyle so it makes sense.
@@LLAMA-LLAMA I looked into doing it myself, but my garage floor is badly pitted. I looked into diamond grinding, epoxy, a professional one day epoxy, and even a repour....$$$$. Finally settled on click together free flow tiles from Garage Flooring LLC...awesome. Graphite with a black border 👍 Same tile and quality as Race Deck...half the price.
@@nerdymra8252 he got basically the same thing from Costco. It’s held up very well and no problems from a heavy 55’ Chevy Bel Air. Nice color choice and I bet the Beetle looks nice sitting on it.
Made it look easy great video
Do you have a copy of the instruction manual?
Great Video.
When you install this, how tall is the top of the red posts to the ground? I'm not sure I'll have clearance underneath my garage door track.
Very informative
Q: Can you just install the entire wall rack so that the square bars graze the ground and use those red beams stacks for supporting all the weight down onto the entire beam instead of the levelers ???
I’m not sure. Tough one to a sewer whiteout being there
That’s a good question I had myself as well. Right now seems that all the weight is being supported by the levels and not the red beams
Good job, was wondering as well are they going to be a giveaway this week? If yes, I'm not sure where to enter. Lol
Can you list the tools used for this install! I am excited to get my installed
Sure.
Impact Driver 18/20/24 volt
Drill driver
Pliers
Ratchet & socket set (Large sockets 19mm-32mm sizes)
Mallet
Stud Finder
Bubble Level (self leveling lasering if possible, makes it easier)
Set of wrenches
That should be all that you need.
Hey really appreciate the video very helpful. My garage ceiling is the exact same height as this model = 92inches. Do you think the rig would work?
Well I think putting weight on uprights is stronger than those tinny flimsy all thread
Great video. Pretty cool setup.
Sweet!
how long does it take on average to install the ethos folding wall rack?
I wish a low cable pulley could be installed! Lmk if you know of someone that can make it happen!
Can these be mounted to a totally concrete wall in the basement ?
Yes. Use wedge Anchor bolts to attach the system to concrete.
Will these arms clear the garage door? I’m trying to avoid clearing out the shelving already in place
I have about 18inches of cinder block wall in my garage. Would the bottom stringer fit on that wall (given the offset from the floor and the height of the stringer)? Also, will the bolts work in the concrete block, or would I have to get alternative bolts for the concrete block wall?
I have the same question!
Did y’all figure this out?
The bottom half of my garage is concrete and isn’t perfectly level with the sheetrock. Can this work?
Can you put the rack completely together and then attach to wall?
Possibly. I wouldn’t go that route though.
That’s what I just did. Turned out perfect.
can I mount this to a wall with metal studs?
Yes. Use metal or self tapping screws/bolts.
@MasteringMayhem Has anyone needed to shorten the height of the red support beams? I need to shorten these to be able to install in my basement.
had them cut at metal shop. took 6 inches off the top. Still gives me enough room to attach the pull up bar
Cool like video!
Where can I get the manual?
You should be able to get it online 🙂✌️❤️
Did you ever find manual? Just opened my box and there was nothing in there. Thanks!!
@@travishulbertdc Same
Need that manual!
Love the rack, super helpful video just have a slight Hiccup….missing the locking pins for the rear and the pull up bar….rears are not an issue easy to find but the pull up bar ones look specially made for this application any ideas on how to get replacement parts?
Here
Similar Fitness Equipment To Ethos Power Rack, Etc. On Amazon: amzn.to/3pDeJqr
CIGMAN 3x360° Green Laser Tool Self Leveling 100ft: amzn.to/2Vt6duS
That is a nice rack, how much weight is it rated for?
Would this be able to be installed in a garage with the concrete foundation exposed along the bottom of the wall? I don't have straight drywall all the way to the floor, it's about a 2ft tall concrete from the ground up along the wall. Is the bottom bracket installation adjustable or is it ok to bolt to the concrete?
Curious about this too- mine in only about 6” but has molding on top so about 10” total. Some of these racks look like they mount really low.
@@naturaljoe759 precisely, these horizontal brackets look like they mount way too low for my setup, and i don't have experience screwing or bolting into concrete. Since it's foundation, I'd prefer to keep that untouched if i can
You can adjust that bottom stringer bracket but the adjustment is limited to the holes in the Up right posts. I would Anchor Bolt the bottom stringer to the concrete as my fires option. 🙂✌️❤️
@@MasteringMayhem thanks sooooo much! I know this is a totally newbie question, but are there any concerns with bolting into the concrete foundation?
Also, i have one other reeeeeally important question (because I'm very close to purchasing this), are there other attachments besides the pullup bar and spotter arms? Like is there a dip bar or any other attachments for additional excercises? Thanks so much for replying, your vid was wonderful.
Anyone know of a dip bar attachment that’s comparable with this fold rack?
I plan on making one! If I do I’ll post the design
No. None of the big companies make one for this configuration
I looked at this a while ago at dicks it's a solid wall rack BUT "and it's a big but"
you can only get spotter arms online for an attachment on this rack. I would rather go with prx ,titan fitness , or rogue because then you can get numerous attachments for your rack.
Not the case anymore. I was able to order the spotter arms, squat rack, bench chair, etc. From the store and pick up same day.
@Keith Schuch no its the case. You can only get spotter arms and j cups. They don't have any other attachments for this fack. It's not a bad rack just if you want anything else you CANT GET IT. like I said you would be better off with another company that has 3x3 or 3x2 with 5/8 OR 1" HOLES
@Keith Schuch honestly if all you want it for is squat and bench it's OK but I like using my monolift attachment to save my shoulders on the bench and I don't have to walk my squat out. You can't get a monolift for the ethos wall mount
Can someone send me user manual please
👍🏻🍻🍺🍕
Hey Marius have u got a response from the guy with the thumbnail
Yes. He said he won’t be able to start on it until next month. No charge unless he needs to pay for a track or anything like that. I sent him a link to your channel.
@@MasteringMayhem oh ok thanks a lot
@@MasteringMayhem and he can do anything any kind of design just to be related to my channel
Nice install Ethos. Squat tack looks great, I like it's ease and compact footprint.
Killer
i’m seeing this when christmas is only a week away🥲
Clean install and great tutorial. You know so much about the models, are you installation trained or instruction manual smart? Keep up the good work my friend. That laser is cool!
Instructional Manuel smart 🙂. I’ve done so many of these now they all have their typical start to finish process. 🙂✌️❤️