It’s my favorite. Love throwing wheel and tire packages on old rigs. This obviously has more than just that but I’m tired of only seeing new trucks these days. Thanks for watching
Believe me, even here in the USA, that’s wild. I struggle to find the funds just to get a fresh set of tires on my Ranger, and I work 48hrs a week, overnight, outside in the snow.
@@Indarow and then buying the parts is only the first struggle, finding time to actually install everything is a pain too its always rewarding afterwards though
I have a 84 b2000 I’m wanting to do this with I know the ranger and b series pickups weren’t the same till 93 I think. I haven’t found anything b series prerunner but with the knowledge of fabrication is it worth doing? Or would I be wasting my time reason I’m asking is cause there is a lot of rangers and newer b series prerunners but I have yet to see the older models this way just want to be different and unique what are y’all’s thoughts on it?
When it comes to the b2000 I have no experience with them. But if you really wanted to and had the skills for the fab work anything is possible. If it’s the same as the ranger then you are golden. You could always save the heartache and buy a cheap ranger to build as well. Plenty people have done them so there is a lot of info out there. Thanks for watching
By the looks of the truck it looks like an 84 to 88 or unless it was wrecked and got the front clip and dash board replaced it can't be an 89 because in 89 Ford had already a newer style juju front clip that went from 89 to 92 just before the introduction of the round ranger in 93 which still shared the same dashboard as the 89 to 92 then in 95 it was changed again and stayed consistent till the mid 00s or till Ford pulled the plug on the ranger . Sorry there got a little carried away on the rain gutter there
Honestly don’t know. He build and did the fab work himself so labor was free. Also had lots of parts sitting around already. It’s hard to put a actual price on it. But he might sell it if your interested 🤔
@@derxgarage2121 Love the video. That was my exact first truck but the driver door on mine was bashed in. I tried to blow it up so my old man would get me something different...it would not blow @ 65mph in 2nd gear with barely any oil in it!
Let's see your truck ? Usually the people that talk the most shit are the ones with nothing to show for but there hate towards others that are getting it done and specially dont need anyone else to build thers own shit for them so if your one of those who paid to have there shit built by some one else you shouldn't be talking shit cus thers more shit to talk about you then someone doing it all on there own man this shit is not easy its extremely challenging and it cost so much and we dont all have rich parents It takes money and sometimes there's lots of sacrifices that you have to make to be able to finish a project man and the last thing we need to hear is some punk just being disrespectful and obviously has no clue because if he did wouldn't be disrespecting the sport like that
I love cheap builds! Idk why but in between look of new tires and wheels and some new parts on a dusty old truck looks good to me.
It’s my favorite. Love throwing wheel and tire packages on old rigs. This obviously has more than just that but I’m tired of only seeing new trucks these days. Thanks for watching
@@derxgarage2121 couldn’t agree with you more, newer models just don’t have the heart and soul of a beater build
love a good ranger prerunner, out beating on it and having fun!!!
All the time!, he’s throwing a shot of nitrous on it to blow it up for fun. So stay tuned lol
Man being from Canada, it amazes me people have king by passes "in their room laying around" you boys are wild
Lol that’s funny, this guy has a shop full of them
@@derxgarage2121 lmao tell him to send some 3.0's my way for my tundra
@@Brighton_Lal maybe if we find a spare he will send some your way
Believe me, even here in the USA, that’s wild.
I struggle to find the funds just to get a fresh set of tires on my Ranger, and I work 48hrs a week, overnight, outside in the snow.
@@Indarow and then buying the parts is only the first struggle, finding time to actually install everything is a pain too its always rewarding afterwards though
Super stud cage work, kudos. Been thinking of a Prerunner build for some time. The Stay safe salute.
He’s definitely a beast with the fab work. Thanks for watching and I’ll make sure to tell him you like the work!
Precioso Ranger!! Todo lo que necesitas para disfrutar el desierto.
im about to start on one of these, a 90 ranger with 95 f150 ttb and rear end and a conversion van 302
Good luck on the build!
@@derxgarage2121 thx, goin slow cause im about to graduate but its getting designed, lol
How ambitious would it be for a 16 year old to build one
If you are good with a welder and fabrication work then go for it!
awsome wheel , heck over car
Hermoso ranger bro gran proyecto saludos desde la baja
gracias por mirar, estad atentos para más videos!
@Ismael Sanchez @decomamotorsports en Instagram
It needs a turbo 2.3
Still really coll truck
They should call that thing ranger danger
What coilover did you use on the front? Can’t find any info on which ones to use for a 5.5 lift
Stay on the lookout for a update video on this truck we will make sure to go over all that!
Where did he get the body kit from?
Not sure where but next time I see him I can ask
I have a 84 b2000 I’m wanting to do this with I know the ranger and b series pickups weren’t the same till 93 I think. I haven’t found anything b series prerunner but with the knowledge of fabrication is it worth doing? Or would I be wasting my time reason I’m asking is cause there is a lot of rangers and newer b series prerunners but I have yet to see the older models this way just want to be different and unique what are y’all’s thoughts on it?
When it comes to the b2000 I have no experience with them. But if you really wanted to and had the skills for the fab work anything is possible. If it’s the same as the ranger then you are golden. You could always save the heartache and buy a cheap ranger to build as well. Plenty people have done them so there is a lot of info out there. Thanks for watching
Hello! Where can I buy fenders like this for a 1978 Ford F250? thank you very much in advance!
I’ll ask the owner. When he gets back to me I’ll lyk.
By the looks of the truck it looks like an 84 to 88 or unless it was wrecked and got the front clip and dash board replaced it can't be an 89 because in 89 Ford had already a newer style juju front clip that went from 89 to 92 just before the introduction of the round ranger in 93 which still shared the same dashboard as the 89 to 92 then in 95 it was changed again and stayed consistent till the mid 00s or till Ford pulled the plug on the ranger . Sorry there got a little carried away on the rain gutter there
Hahaha all good. I’m not to in the know when it comes to fords but good to know!
If it's leaking it still has oil in it.....
Fuckin Bad Ass lil Truck dudes..
Thanks! I love this truck. He’s doing a full back half now and just pulled the motor today. Hopefully we can make a video after it’s done.
We need an update on this ranger!
I can do that! Let me tell you the ranger looks a whole lot different now. In a good way.
Could I get some links for that body kit and suspension?
I would if I knew where all this came from. Most of these parts were sitting around his shop. Thanks for watching.
Is this truck still around in 2024? What’s the shops name? IG?
where did he get that body kit?
Not sure but we’re doing a update video very soon and will make sure we go over all the details! Stay tuned
red rocket lmao
Quick question how come when he brakes why does it sound like that?
What do you mean?
That is actually the spring for the literal pedal . Connected to back of pedal and firewall inside the cab.or the tires howling from locking up?
Did I hear Tacoma motor sports ????
I have a 91 ranger built identical to yours but has a 5.0 out of a foxbody
Nice truck!
How much did it cost to build that beast
Honestly don’t know. He build and did the fab work himself so labor was free. Also had lots of parts sitting around already. It’s hard to put a actual price on it. But he might sell it if your interested 🤔
@George Armstrong nitrous has not yet been installed. But it is in the works 😂
@@derxgarage2121 Love the video. That was my exact first truck but the driver door on mine was bashed in. I tried to blow it up so my old man would get me something different...it would not blow @ 65mph in 2nd gear with barely any oil in it!
@@cencoast_7.340 yea this thing still has not blown yet. Like he said, it might not make enough power to blow it self up lol
Hey I’d like to buy that truck. How can we work out a deal?! I’m in SoCal...
You can shoot a offer but he doesn’t really want to sell it.
Update
Yes it’s in the works. I was just talking to him yesterday. The truck is a whole different beast now. Stay tuned!
Update!
We’re trying to make that happen! The truck is a totally different beast now.
Can you try and do donuts on the street
I’ll ask him if he is down lol..
He has a shop?? Pretty crappy build
Hack fab customs! Let’s us know when you need a build
Let's see your truck ? Usually the people that talk the most shit are the ones with nothing to show for but there hate towards others that are getting it done and specially dont need anyone else to build thers own shit for them so if your one of those who paid to have there shit built by some one else you shouldn't be talking shit cus thers more shit to talk about you then someone doing it all on there own man this shit is not easy its extremely challenging and it cost so much and we dont all have rich parents It takes money and sometimes there's lots of sacrifices that you have to make to be able to finish a project man and the last thing we need to hear is some punk just being disrespectful and obviously has no clue because if he did wouldn't be disrespecting the sport like that
I’m very curious what year beams he cut and extended. I have a ranger pretty similar I just started
It’s been a while I’m not sure but when I see him again I can ask for you
Instagram?