HUGE 737 MAX RC Plane (Freewing AL37)
Вставка
- Опубліковано 4 лип 2024
- I take donations if you'd like to help contribute to the channel, or if you really have a model in mind that you'd like to see me fly, set up, and put through its paces: www.paypal.com/paypalme/JonSynRC - you can also hit the Super Thanks button and donate directly to the channel if you wish, too!
It's been a bit since I've brought the 737 out. Make no mistake, it's massive. One of the biggest foam models you can get - and it flies big, too.
🙋♂️ --------------------------------------------- Social ---------------------------------------------- 🙋♂️
If you could, too, consider following me on social as well:
⌛ Tiktok: / jonsynrc
📷 Instagram: / 5ynaesthesia
📷🙋♂️: @EscapeLifesGravity
📦 -------------------------------------- Things I Fly --------------------------------------------- 📦
Receivers:
Spektrum AR10360T Receiver: tinyurl.com/AR10360T
Transmitter:
tinyurl.com/IX20Transmitter
Servos:
tinyurl.com/B11DLS
Batteries:
4000 6s Smart 50c Packs: tinyurl.com/Smart6s4000-50c
6000 6s Zeee 100c Packs: tinyurl.com/6sZeee6000-100C
5200 6s Zeee 100c Packs: tinyurl.com/6sZeee5200-100c
5200 6s Zeee 50c Packs: tinyurl.com/6sZeee5200-50c
Thanks for watching guys. See you again soon.
Neonscapes by | e s c p | escp-music.bandcamp.com
Music promoted by www.free-stock-music.com
Attribution 4.0 International (CC BY 4.0)
creativecommons.org/licenses/...
#radiocontrol #flight #rcplane
0:00 Introduction \ Background \ Preflight
1:49 Takeoff \ Taileron & Flaperon Roll Rate \ Full Flap Pass
3:00 Touch & Go
3:24 Tail Slide \ Inverted Test
4:00 Inverted Pass
4:32 Short Knife Edge
5:08 Long Knife Edge
5:25 Landing \ Post-flight
6:23 Takeoff \ Tail Skid \ Full Rolls
7:00 Inverted
7:40 Wheelie & Go
8:32 Tail Slide \ Knife Edge
8:50 Snap Roll \ Hammerhead
9:13 Full Flap Pass
9:38 Landing \ Post-flight
10:55 Takeoff
11:54 Wheelie & Go
13:00 Wheelie & Go
13:54 Touch & Go
14:54 Landing \ Thoughts
Freewing, 70mm EDF, twin EDF, EDF Jets, Motion RC, Boeing 737, 737, freewing al37, freewing al37, jets, super scale jets, 70mm edf jet, radio control, rc airliner, airliner, rc airplanes landing, rc plane, rc planes, 737 max, rc plane, freewing 737, 737 landing, tutorial HUGE 737 MAX RC Plane (Freewing AL37) - Розваги
Well it's nice to see someone put this bird through it's paces. You did such a good job I'm giving you a thumbs up and I'm subbing to your channel. Keep up the good work and looking forward to your next video Jon. I think I'll check out some of your past video's now.
Thanks Tony! Good to have you onboard.
Made i look easy. Looks like 50% throttle is the sweet spot for the approach
sweet looking livery. i customed mine with some war bird paint i had left over. looks good and hopeful for a successful maiden.
Such a nice plane. You really handeled it very well. Your landings are so good. Keep sharing
Will do! Thanks Johan!
Love that you used the Delta classic livery! Nice bird!
Great flying. RIP every single passenger
Thanks Jon for the Big Bird video and congratulations on 2000 subscribers.
Great work with your videos!
Finally i finished work ,man your flying skills are awesome ,I mean such a good video and the video combines with the talking really good 👍👌
Some smooth and buttered touch’n’go bro 🥳🥳🥳👌🏻
Awesome Jet!
Great Video as usual! Only 2k subscriber's come on people just subscribe already!! This man is dedicated to this hobby and the information shared I'm sure has helped thousands of people. Keep it up Jon I really appreciate the effort you put in!.
Thanks Martin! Getting subscribers is all about getting the YT algorithm to push content. This vid is starting to perform but who knows if the algorithm will decide to stop showing it.
SWEET
Did you add the MCAS system to it so it would crash on takeoff randomly? Beautiful model and I think the landings (approach and rollout) are the best part.
Beautiful!! HOWEVER… it’s sacrilege to put a delta paint job on a max since they don’t fly max’s!!! 😆😆😆
Great video as usual
Nice just got my AL 37 going to do the Max version with the older AA scheme aluminum finish. Kinda partial to the 737 former Capt on the AA 73 now flying the 777 Had to subscribe guess Ill be binge watching your vids this weekend. Where do yu fly out of?
Were in Raleigh, NC. Thanks for checking us out!
Cool model, nice build & painting. Smooth flying. Camera needs some work.
Camera needs work?
@@TwoBrosRC Better said, cameraman/woman. He/she had a hard time keeping up with the model on the low passes.
Awesome flight demonstration! You are such a good pilot! 👍🏾👍🏾👍🏾
Would you share your radio set-up with us on a dedicated video. I'm really interested on that taileron/flapperon mixing you have on some of your planes as well as the air-brakes/ spoilers... Those settings are fantastic!... I also own one of those AL37s, but mine has normal settings...Ohh, and I also have an iX20SE just like yours! 😁👍🏾
A radio set-up tutorial would be greatly appreciated by most of your subscribers, specially me!...👍🏾😊 Have a great rest of your day! 👍🏾Greetings from Douglas, Arizona 👍🏾🌵🦠😷🇵🇷
Like#130
Thanks man! Here's the setup for it: ua-cam.com/video/QPpFYO9koXQ/v-deo.html
@@TwoBrosRC Awesome, thanks! 👍🏾👍🏾👍🏾👍🏾👍🏾
as a fellow flyer you are one of my favorite to watch on UA-cam, how long have you been flying? and is the IX-20 a good investment?
Thanks man! I've been flying simulated full scale most of my life. I'm 38. I've flown RC for the past two years.
And yeah, the IX20 is a great radio. It was worth the price for me and the advanced channel mixing I like to do.
@@TwoBrosRC also how do you set up voice prompts?
@@CentralRC24 Check my Turbo Timber Evolution setup. I believe I went over voice callouts in that vid.
I really like that video. When you inverted it it reminded me of the movie with Denzel Washington when he inverted.
I know a flight that I'd love to have your opinion on but how do I get word to you without self promoting?
I would have a ball chasing the flights you get!
A flight you'd like an opinion on?
@@TwoBrosRC
Yes, same plane. I really liked the way you produce that. So I figure you have the experience to give good commentary on what I tried to do with the same plane.
I mean theres a reason the real ones got spoilerons might as well give it some more roll power
Spoilerons would provide a ton of roll authority, but since this model doesn't have spoiler panels I've made do with tailerons and flaperons. Seems to work pretty well.
Hello, I've adapted your crow braking in my Avanti S with AR737TA will be trying it out. Would you know why I only have one aileron working on AS3X and none at all when I have Crow on? I'd like to know if you've encountered something like. that. I'm still using the circuit board they provided with the airplane.
That's because you haven't reprogrammed the receiver. It's a unit from a BnF model so you'll have to unlock it via the Spektrum Programmer app before you can reprogram it to understand that it's using two ailerons instead of just one.
ok thank you. the receiver has been unlocked cause I've been using it and now I programmed it for CROW that's when I lost AS3X. I don't use safe so I never programmed it for safe. thanks for the advice and I'll reprogram it. thanks again.
@@xhawkchief If you've unlocked it already, use the "Relearn Servo Settings" menu option under AS3X Settings and it'll understand that you're using a new wing type and the gyro will be active on it.
Thank you very much. it worked
Real airline pilots cant even land like this. Butter.
I been trying to set elevons and flaperons on my AL-37 with a spektrum nx10 and have been having a hard time getting it to work. Any suggestions?
Try following my setup guide: ua-cam.com/video/QPpFYO9koXQ/v-deo.html
@@TwoBrosRC thanks. I’ll try again and see what happens
@@TwoBrosRC I get the elevators to work with the ailerons but they both go the same direction. Can’t seem to reverse one. I’m guessing that’s cause they are both on one channel. Do I need to separate the elevator channel ?
@@rickcoble5566 Yes, you'd need to separate them.
I would appreciate it if you could provide me with a site for the electronic devices used on this plane.
Such as?
Please i would love to learn how to use an rc transmitter
Google it, there's a ton of info!
🍾🍾2000🍾🍾
Can you send me the link for this Decal kit?
Google Callie Graphics
What happened to your AL 37 set up tutorial?
We took it down since it wasn't performing very well. We tend to cull videos if they don't meet a certain view threshold after a certain period of time.
Delta? Why not American Airline?
You're welcome to paint your own airliner in a livery you prefer.
That's huge?! I guess you haven't been exposed to alot of RC YT Channels yet....
Most people think that a 2m airliner is pretty huge, but go on.
Don't fly like that. I am sitting in seat number 10, and I feel sick.. lol 😃😃❤️
Too bad Delta doesn’t actually fly the MAX!
A shame, that. I'd love to see the classic livery brought back while they're at it.
Delta has 100 Max 10s on order! First deliveries 2025.
@@tdkleffman if you know anything about it , the max 10 will never come to fruition
@@johnpatterson9373 At the end of Dec Congress gave Boeing the waver they needed to certify the MAX 10. Boeing says certification will occur late this year or early next year.
@@tdkleffman we got the same deal …. Still waiting after 2 years
i dont see how pple can fly with only their thumbs on the sticks
Easy, by using your thumbs. 😉
Nice plane! But "Huge", no not at all... Clickbait headline 🙈
It's 6.5 feet long. If that isn't huge, your standards for size are odd.