The Idaho did not use the tool properly and so it did not work for him. You have to learn how to use it but it is pretty amazing once you do. You need clean crisp surfaces for it to work perfectly.
It’s true. It Will give you straight lines especially on a flat ceiling. You will still have to cut in corners and around certain areas, but on straight stretches you will definitely get straight lines!
Amazing video can't wait to see more this helped me so much thank you for helping me I am going to home Depot I have a whole house to do just me I have a friend who's a painter but he's always is showing me what paint I should put it on and I'm on my own my house needs work I'll be in tears here and there I'll get it done I have the living room to do three bedrooms dining room it's pretty bad I got my friend gave me some some other stuff pray for me 😔🥲
I agree but it is because the edge to start with was not perfect, It is not because of the tool. And still there was no paint on the trim and I do not think you could do any better with a brush. I will have to make another video using a clean edge to show you. I can cut in a bedroom in 20 min with this and have a cleaner edge than most professional painters.I can cut and roll with an 18" roller a 10'x 12' room in 45 min. most painters take 2 hours or more.If you use a gorilla 4' platform bench the ceiling cut goes very fast. www.homedepot.com/p/Gorilla-Ladders-47-in-x-12-in-x-20-in-Aluminum-Slim-Fold-Work-Platform-with-250-lb-Load-Capacity-GLA-47WP/206127529
@@davidlovell7724 I watched that video and he had not even read the directions to know how to properly use the tool.He was rolling the tool in the wrong direction which leaves wheel marks.
I'm very convinced about buying this new tool I seen the Idaho painter Chris talk about this product
The Idaho did not use the tool properly and so it did not work for him. You have to learn how to use it but it is pretty amazing once you do. You need clean crisp surfaces for it to work perfectly.
It’s true. It Will give you straight lines especially on a flat ceiling. You will still have to cut in corners and around certain areas, but on straight stretches you will definitely get straight lines!
I'll stick to a good ol 3" brush 👍
Amazing video can't wait to see more this helped me so much thank you for helping me I am going to home Depot I have a whole house to do just me I have a friend who's a painter but he's always is showing me what paint I should put it on and I'm on my own my house needs work I'll be in tears here and there I'll get it done I have the living room to do three bedrooms dining room it's pretty bad I got my friend gave me some some other stuff pray for me 😔🥲
I cut in on stilts with a brush and I would have that whole room cut in before you get your first role
Good job zooming in. Nobody else does. I was shitting on this going from one painter to another but then you zoomed. Good looking line.
Thanks for sharing the demonstration on how to use it. It's very impressive. How do you do it on the ceiling corner?
You need to cut the ceiling corner the old way with a brush
Hi good afternoon how can I get some off does Bush
What are you going to do about the corners and the angles around the window sill
Thankyou❤
Pick different color from background so that viewers can see how straight and close the cut is.
LoL good one
I always get drips…
That was not a perfect edge!!🤣🤣🤣
I agree but it is because the edge to start with was not perfect, It is not because of the tool. And still there was no paint on the trim and I do not think you could do any better with a brush. I will have to make another video using a clean edge to show you. I can cut in a bedroom in 20 min with this and have a cleaner edge than most professional painters.I can cut and roll with an 18" roller a 10'x 12' room in 45 min. most painters take 2 hours or more.If you use a gorilla 4' platform bench the ceiling cut goes very fast.
www.homedepot.com/p/Gorilla-Ladders-47-in-x-12-in-x-20-in-Aluminum-Slim-Fold-Work-Platform-with-250-lb-Load-Capacity-GLA-47WP/206127529
@@michaelkleinman9650 looking forward to seeing the next video
Y
Hi I have just watched a video saying that tool is a con, and not to buy it, he said its a false economy item?
@@davidlovell7724 I watched that video and he had not even read the directions to know how to properly use the tool.He was rolling the tool in the wrong direction which leaves wheel marks.
I'm looking forward to see more videos I'm excited amazing videos are going to help me so much I need all the help I can get thank you one love❣️🥲☺️