Hola tengo una duda LA ARENA es la comun de la pared...te doy like porque esta bueno el video (no conosco la arenadora y estoy pensando en mis rejas que estan destrozadas de pintura gracias.-
The maximum particle size must be 1/5 of the nozzle outlet hole. For example with a 3mm nozzle the granulometry or sand, at most 0.6mm. (3mm / 5 = 0.6)
Из пескоструя соорудил пескоструй, этож надо такой хрени в голову придти. Я им радиатор охлаждения масла АКПП промывал раз в год на RX 350, классная штука.
I don't have all those things just laying around ready to be destroyed, so I guess buying the real deal would be cheaper for me. Thanks for the video anyway.
Need a larger compressor. Most people use the 1/4 inch coupler. I see you used the larger one. You can all soak the rusty part in 1 part molasses to 9 parts water for 7 days, and the rust will wash off with running water.
Isn't the starting gun already a sandblasting gun? it seems to me that the red container is used to put the abrasive which is then vacuumed by depression
That's a parafin gun but in all honesty if you was to take the nosel off the end I would have thought it could do the same job ... Never tested this theory so would be interesting
@W W this is wrong, I have a sandblasting gun which does not work by gravity but by depression, the tank is under the barrel :) (like the Metabo SSP 1000 for example)
Balkan handyman? More like Balkan Xzibit, "Yo I heard you like sandblasters, so i put a sandblaster on top of your air nozzle and turned it into a sandblaster"😂
Con el costo de las dos pistolas que desarmó para hacer una, se podia comprar dos pistolas arenadoras With the cost of the two guns that I disassemble to make one, you could buy two sandblasting guns haha
Link of time for 4 years in maritime college. Western thinking with soviet childhood monetize everything, if you wanna live in western world well, keep silence, boast and selfish is the answer.
I tried it ... it works !!! thanks for the awesome video.
I can't get the small pipe out. Please advise
MARAVILLOSO EL INVENTO
Making a sandblaster out of a sandblaster.
Didn't know that was something i could do at home. Thank you kind sir.
Thought it was a paint gun?
The legend say that 3000 years later he still removing rust from that piece
😜😜😜
legend says you still haven't figured it out how to make it 🤣
Yo iba a fijar el tiempo en 30 días más tarde ..... y fueron 3000 años !!!! Jajaja.
Nice DIY svaka cast za video!!
Hvala brate, svaka podrška znači 😊
Great idea! Thanks for sharing my friend!
Thanks bro 😊
@@BalkanHandyman You are welcoe my friend
@@christofix 💪💪💪
Your calipers have seem better days. Nice trick, I have some spare parts I will try it...at last it is inexpensive. Congrats.
really cool idea
😊😊😊
The most interesting part of this was the way to find the centre of a round object
🤣🤣🤣
except he didn't find the center. It was clearly off center.
@@jtltet bjj
this is the video of all time for homefixers!
Perfect idea..good job bro
Thanks 😊
List of stuff that is used in the video would be great! Nice vid
Rickard Weed will cost you a fortune
Not bad. With a little extra expense on some BSP nuts n fittings to replace the JB weld I'd say you could up the PSI to make it work even better.
😊😊😊
@@BalkanHandyman I want to buy, cost?
Nice DIY idea
Thanks 😊
Looks awesome
great job man
thanks bro 😊
Very very brilliant idea
Hola tengo una duda LA ARENA es la comun de la pared...te doy like porque esta bueno el video (no conosco la arenadora y estoy pensando en mis rejas que estan destrozadas de pintura gracias.-
Комментарий не несет смысловой нагрузки, просто поддерживает видео и автора канала.
Nice idea keep up the good work , will try soon .
😁😁😁
How did it went
Intelligent!
Этого аппарата хватит на 5 минут, потом все нахрен сотрется песком.
what sort of sand is being used? if silica sand it should only be used in a cabinet or full face oxygen fed mask
Ako uzmes staru svjecicu i konektujes na crijevo s vodom dobit ces bolji efekat bez kompresora.
my friend. very nice. bravo.. thank you so much....
Thanks 😊
mis saludos desde venezuela....interesate muy bueno el proyecto
Thanks 😊
Хороший пескоструй,шарику яйца щекотать.😆😆😆😆😆
awesome video
Thanks
Great job ! 👍🏻
Cool
Respect!!!
The maximum particle size must be 1/5 of the nozzle outlet hole.
For example with a 3mm nozzle the granulometry or sand, at most 0.6mm. (3mm / 5 = 0.6)
Maybe you need a stronger compressor? What Psi were you on?
Looks more expensive than the real thing
😊
Suitable for weak compressors👍
😊
Это гениально,взять пескоструй и сделать из него пескоструй.
Rumour has it he is still cleaning that rust off!
why is it better then original? what is the benefit?
Из пескоструя соорудил пескоструй, этож надо такой хрени в голову придти. Я им радиатор охлаждения масла АКПП промывал раз в год на RX 350, классная штука.
Очень намудрил с конструкцией,можно проще,и дешевле
Так этож забугорное видео, забогорные жители, вот и делают все через одно место. Крайне не удобная конструкция, все на эпоксидке. На пару раз...
0:40 you GLUED it ? was it too difficult to buy a simple screwable joint ?
yhea i would'nt say it's made fron lottel but nice creation of course you first need to buy all that stuff...
I got this parts for free 😉
I don't have all those things just laying around ready to be destroyed, so I guess buying the real deal would be cheaper for me. Thanks for the video anyway.
Cut the bottom off of a pop bottle and tape it to the end of the tip to keep sand away from your face and everything else
Need a larger compressor. Most people use the 1/4 inch coupler. I see you used the larger one. You can all soak the rusty part in 1 part molasses to 9 parts water for 7 days, and the rust will wash off with running water.
I'll try and will report back the result. Sorry, skeptical, but love sweet ideas!🤣
Как раз на время самоизоляции, убить это самое время и деньги. В качестве развлечения .
What is the red canister please ?
Why epoxy? Why not find the right fitting?
Без керамического сопла на 10 минут работы хватит!
Wath is the reason for this complicated construction???
Where can i buy it? Anyone has information?
Isn't the starting gun already a sandblasting gun? it seems to me that the red container is used to put the abrasive which is then vacuumed by depression
That's a parafin gun but in all honesty if you was to take the nosel off the end I would have thought it could do the same job ... Never tested this theory so would be interesting
I thought the same thing .. did he just take apart a sandblast gun to make a more complicated sandblast gun?
@W W this is wrong, I have a sandblasting gun which does not work by gravity but by depression, the tank is under the barrel :)
(like the Metabo SSP 1000 for example)
@@anthonys4685 I presume with sand you need to blow air in from the bottom, unlike with liquids.
I m struggling to remove centre pipe
Why not just use the sandblaster you already had?
I wonder how the man threaded the hole just with thrusting the drill
А сопло че не показал после эксперимента? Вангую что его хватит на 3-4 банки песка.
can you translate your comment on English?
@@BalkanHandyman 4minut anb dead point
🤔🤔🤔
Готовый пескоструй стоит 3,5 копейки, а два пистолета угробил
?
@@BalkanHandyman Чего, по-русски не понимаешь?)))
Железной щеткой можно очистить гораздо быстрее
I am no expert but with pressure and glue . Better wear eye protection, just to be safe. Lot off effort to make vedios, thnaks
Balkan handyman? More like Balkan Xzibit, "Yo I heard you like sandblasters, so i put a sandblaster on top of your air nozzle and turned it into a sandblaster"😂
Через 5 мин будет сопло на всю ширину трубки...от свечи вставьте керамику хотя бы..😉
Don't look like it works that good😂
Best
good
A nozzle will go quickly
on a vu plus simple pour sabler !
?
Holy cow just buy a sand blasting gun instead of ruining good tools.
Salute
Con el costo de las dos pistolas que desarmó para hacer una, se podia comprar dos pistolas arenadoras
With the cost of the two guns that I disassemble to make one, you could buy two sandblasting guns haha
Exactamente eso pensé
Además necesita un pico cerámico en la salida porque al de metal en un rato lo desgasta por completo.
genial
ua-cam.com/video/2Y70l_mlSys/v-deo.html
It sale or not
Yo quiero saber los de talles de la espuma como se ase i de que liquidos
?
Сразу видно что не русский
Влага с компрессора идёт а это не для пескоструя!!!
Не говори. Тройник впендюрить не проще было . Чем уродовать пистолет для накачки шин . Не русский блин
Lokks nice but how you hold in your hands, looks wery uncomfortable
чето я непонел в чем прикол?
I need your copressor for sand blasting, where is ur direct address
i was thinking i need one of those to clean the muck of my daughter's trainers.
Disculpe puedo ponerle agua al deposito
Yes 😁
Пистолет для пескоструйной обработки купить не пробовали гораздо проще чем городить не понятно что....
Пескоструй!👍☝обалденно задумано!
😉
Только инструметы испортил.
I tried a couple diy sandblasters and ended up with a glorified confetti gun.
Bad Machín!!
Пипец 700 р стоит мастичная пушка- ей можно пескоструить ,тянет хорошо и эффективнее работает
Three weeks later...
Say no to the jb weld and just get a piece of 1\4 inch fully threaded pipe instead of flipping the quick connect over its much safer
😊
Too complicate idea, but works. There is a lot simple way.
give me link for something simple
Link of time for 4 years in maritime college. Western thinking with soviet childhood monetize everything, if you wanna live in western world well, keep silence, boast and selfish is the answer.
UA-camr: how to make sand blaster!
Comments section: *utter gibberish about soviets and capitalist*
Это не пескоструй , это игрушка, которой хватит как раз. для видео
Конструкция чумовая но чистит как-то плохо
?
согласен.
Извините но неудачно и очень сложно.
Хуйня полная, если по-русски и своими словами. 🤔
Проще готовый ( напорный принцип действия
) купить. И эффект будет
, более продуктивнее . А представленное здесь ( деньги на ветер ).
😄😄😄😄😄 10 Years later!!!!
takim piaskowaniem to mozesz pankocie swojej piaskowac .......
Why does it have a lot of unlikes ?
I don't understand why people unlike this video?
Jealousy
Cheap sanblaster would probably cost same as these two hardware pieces minus human work...
this parts I got for free 😉
VALLAHİ SÜPER SELAM
🤔
i Have A Few quession Please Reply Me Soon ?
ok
@@BalkanHandyman What kind of material is used for it?
And...Bingo was all Lame-oh!
😲😲😲
Испортил два пистолета
what?
glue on airline fittings i don't think so
Испортил инструмент, ради чего?
Nothing was destroyed 😉
павел никоноров он его не испортил а уебал
👏👏👏
Хайпануть хотел , не фартануло
Can i buy a vowel