HOW TO BUILD A D.I.Y QUARTER PIPE SKATE RAMP *easiest way*
Вставка
- Опубліковано 29 вер 2024
- This is our demonstation on how to make a D.I.Y quater pipe, 2ft high by 6ft wide. It took about 2 hours to make the ramp and it costs about $250 AUD. We hope you enjoyed this tutorial and the skating.
Comment down below on what you think about the video and subscribe down below if you like this video and want to see more.
Check out our other d.i.y skate build tutorials.
Song: Chuki Beats - CLOCK
Check out the new updated quarter pipe video ua-cam.com/video/DD6LqJ33dkY/v-deo.html
For anyone wondering $250 Australian Dollars is approximately:
$170 USD
140 Pounds
150 Euros
Where'd U guys get the wood from?
Parkour guy sam I got my wood from Lowe’s, that’s probably the best place
StreetFlow Skateboarding n
StreetFlow Skateboarding btw that is not cheap or easy
"cheap" 150 euros
Thank you now I can make a skate park in my backyard
I would also like to make my own skatepark👍
It cost 200 dollars tho
@@nintendoplayas3847 not if you find the materials on a verge side
@@nintendoplayas3847 lumber ain’t cheap, that’s the main price gouger
Who else loves how the intro is in time with everything
Bro thank you so much I need this cause all the skateparks are closed
Yesssss Carine skate park!!!
What material is the coping
Can you tell me the lenght ? The transition seems pretty mellow I'd like to build the same one
Im making it so it's a 1m platform at the top (about 3 feet if ur American) and 1m for the ramp. It looks about the same as theirs. Then u can make it as steep or mellow as you'd like. I made it have a 1.4m (4.5 foot) radius for the transition
It worked bro
Very good stuff, subscribed
How long did it take to make all up? Looks good great work!
It took about 2 and a half hours to put togther but about 2 hours to mark and cut everything aswell.
Jakes fishing Adventure s
i may be 3 years late but what were you measurement that you had cut
Hey, any chance you have plans for this build? I’m planning on building a ramp 2ft by 6ft exactly like this for my basement but can’t find plans anywhere. Thank you :)
Sorry I just coppied a pre built quarter that I had. Take a look at these plans and just make it an extra 2 foot wider. Everything else would be the same. diyskate.com/micro_quarter.html
Great tutorial. Did you guys just use marine ply from bunnings?
Na Bunnings ply is terrible and super expensive these days. I got it from a Ply wood supplier in Perth.
@@streetflowskateboarding8367 sweet Im in Perth, do you happen to remember the name?
@@lyndonscott5414 ok cool. They have a Warehouse in Wangara and Kardinya and you just ring or message this number and they’ll open the roller door for you. 0477714599. They have an add up on Gumtree here which is how I found them.
www.gumtree.com.au/s-ad/wangara/building-materials/-quality-marine-ply-at-wholesale-prices-/1257634038?VIP&.apple.uikit.activity.copytopasteboard
If this link doesn’t work just search ‘Quality Marine Ply’
Hope this helps
@@streetflowskateboarding8367 absolute legend thanks so much mate, really appreciate it! keep up the great vids.
Thank you
How long did it take for you to build it
how much does it weight? also gret video!
Don’t have industrial scales but my guess is 40kg/80lbs
How long did that take you to do in total
Like half a day
What angle are the sides?
What's the transition at the bottom
What's the transition radius on this?.
Template for the sides of the ramp?
Materials used or material list?
699 subs hehe
@@millstreethschairs3490 ???
???
Are wide are all the parts?
What was the cost to make this???
About $250 Aud
THX M8
Alot of people say skating is for girls but a wise person once told me girls can do anything boys can do if not better
Tripping. Never heard anybody say skateboard is remotely feminine...
How tall is it?
Da Beast Boss 2 feet
Thanks
somebody explain the music
Didn’t u forget how many pieces for each material??
I dont need it
i definitely dont need it
Edit: *I NEEDDD ITTT*
My dad thinks it will be to heavy how hard was it to move
Lance Pic easy with 2 people
Moin
nice work, u dont even tell us the radius you used
KC there’s no way of measuring it
There actually is a way but it involves a little bit of trigonometry. But i noticed in another comment that you used the diy skate plans which uses a 5.5 ft radius. You guys are pretty good if you can skate that. I used that plan too at first and that radius felt whippy af to skate
@@KC-dg9pu Yeah. I didn't actually use the diy skate plans but I think they are very similar. I traced it off on old quarter pipe which was handy. But I didn't know how to show simply show the measurements of it.
Lol at helmets
You need 2x4s going across the bottom
Don't "need" them. But you could have them.
sees metric measurements, hits back button
Waiting around for the last 40 seconds for someone to christen the ramp with a sick trick. Spoiler:
nobody did.
Timbo it’s unfortunate
And what sick trick would you have done on it?
i made this for 20€ lmao
Cool. Materials must be very cheap where you live.
StreetFlow Skateboarding i had tons of wood because my dad is a woodworker
Yeah fair enough. I get all of the pine strutts and steel from my dad aswell. All i have to buy is the plywood.
StreetFlow Skateboarding i just had to buy the metal for tye smooth drop in and also the metal pipe, didnt attach it yet tho
If you soak the deck wood before installing it it will bend easier and dry in shape, making it easier to keep in shape
How much money did it cost you
read the top comment
Thanks so much
I really needed one of these to practice my drop-ins as all the ramps in my skatepark are way to big
Cool ramp as are the mass of the ramp so length or width (height)? would interest me Continue like this❤️🔛
Where did you get those 15mm thick sides from? Did you have to cut them into that shape?
Just got them from local Hardware store and had to cut them to shape. I filmed the cutting of them and building the whole ramp and all the videos deleted :(. Thanks for subbing.
StreetFlow Skateboarding Can you find the metal plates used at the bottom at Home Depot?
+Jeff Jancky i'm not sure cause we live in Australia and don't have home depot here. You can mabey check on there website if they have one.
My brain at 4 am "............choooookie beatZzz"
Sorry about the end of this video. Something went wrong with the compressing of the file and we lost the last minute of skating on the ramp and airing over it. There was only about 1 minute of the video cut out.
For anyone asking about the cost he replied to one of the comments and said that for him around 250 Australian dollars, which is about 150€, and same in US$
170$?
Now just build a smooth driveway
Best comment
This is one of the best builds on UA-cam.
No BS .
I would have minded seeing how they laid out the sides with the radius etc.
Cheers really appreciate it
This is sick!
Cheers, subscribe if you like our content.
@@streetflowskateboarding8367 Lol cheers
I did the stupidist thing ever, I made one when i wasn't good at skating and after 6 months I sold it bc is coudn,rt do any trics on it. Now 3 months later I can like skate really good trany. FML
I had one before this and was actually trying to sell it because I could only drop in and wasn’t skating but then I started skating just in time and decided not to sell it.
And how did you get the ramp so round that it's even? 😋🤔
when you screw in the ramp floor or whatever you wanna call it, it would most likely bend to fit the shape if the nails/screws were close enough to each other.
Congratulations on your work. what is the width/height of the quarter and what are the dimensions of the sides?
GOD ALMIGHTY Loves you all give your life to JESUS CHRIST ALMIGHTY Before it’s to late and live for GOD ALMIGHTY NOT FOR THE WORLD. GOD ALMIGHTY bless you my friends
🔥🙏🤟🏼good stuff. Putting one together from found wood. Checkin out vids, yours is killer thanks homies
Nice little ramp. I'm looking for ideas on how to make one out of recycled pallets during this lockdown. All skateparks are banned =(
Hi,
Could you give me the dimensions of the plates you used for the transition?
I'm gonna make a few of my sons happy !!!
Yeah. It's 1800mm long x 250mm wide x 1.5 mm thick. Mine was just in 2 pieces because i couldn't find 1 piece long enough for the whole ramp.
@@streetflowskateboarding8367 Hey I live in Perth too, We can only get 2.4 by 1.2 from bunnings. In the video you look like you use two bits of ply wood on top of each other. I dont understand how you got the length of 1.8. Can you help? Thank you
Jaleb Bland I cut it to that length
Thanks this really helped! Good job.
i would counter sync the coping but going underneath sounds easier and probably works the same 🤷♂️
Yeah whatever way is easier. They both work fine.
Thanks a bunch for the video. Can you let me know where you got the steel plate? I found some at HomeDepot, but it broke after 5 trials or so.
Marc-Alexandre Prud'homme I’m not sure where you can get it. I live in Australia and got it from my dads mate who works at a steel place. I’m pretty sure we can get it at our hardware stores and there is usually a wider variety in America. Try to find something thicker. And make sure it’s steel. Aluminium will bend really easily.
Guys! here is a tactic to get alot of money saved with this product, Find your local stoor that would sell all of this stuff like wood, and They will probally have thrown out some of there wood, Making it ideal for skaters to make ramps at a low price!
Could you tell me the radius of this ramp? Sick video thank you!
If you make two of these and put them facing each other you can mammals like a half pipe ramp if you make a bigger one yeah
Good did man but when it is done is it heavy?
yes very heavy about 70kg, but two people are able to lift it.
@@streetflowskateboarding8367 ok thank you I'll try it
what are the dimensions of the side cuts? (how long and how high?)
60cm (2ft) High but not sure about length because i copied them off of an old one that i built. Sorry. I'll try to find out in a few hours.
@@streetflowskateboarding8367 How long and wide it is overall and how long is it up where you stand please answer I would be interested 🔛🤙🏼
🔥🔥🔥🤟
i have a question, where did you get all the wood from?
Can you give me the dimensions from the curved side second 12 in the video
What kind of metal did you use for the transition?
Dimensions and shopping list would be great!
Where to get the toe plate metal for transition at the bottom of the ramp
how long are the sides?
i noticed that the ramp moves a little when you ride it. if you were to put 2x4s on the bottom would that help keep sturdier?
Its's fine bro
and they made it in a DAY🙀🙀🙀😧😧😱😱🤯🤯😲😲
Can you get all this stuff from bunnings?
Great videos, other than the music. Please don’t use NCS or overplayed shit anymore. 👌🏻
Mate if you dont like this music, find some non copyrighted music and tell us, we arent a big fan of NCS either but there isn't a large selection of music which is non copyright.
StreetFlow Skateboarding I can hook you up with some of my music 😂 jk it’s trash
StreetFlow Skateboarding I found two channels that aren’t too popular, but their music is good, try NFM - Royalty Free Music, and Chill - Royalty Free Music
Ok cheers. I'll check em out.
Brandon Remming r/nobodycares
What is the lenght ?Good job btw
Carine skatepark gang
this ramp looks good for what mats u used this inspieres me to make my own.
Bro it's in the vid
Check out our other DIY skate builds ⬇️
Grind Box: ua-cam.com/video/XOhIbTxzAEQ/v-deo.html
Round Rail: ua-cam.com/video/HzdpDO8REDg/v-deo.html
Square Rail: ua-cam.com/video/i72HTmmT4Ec/v-deo.html
Kicker Ramp: ua-cam.com/video/SjtjVu2h9so/v-deo.html
Launch Ramp: ua-cam.com/video/GyIo1gic2DE/v-deo.html
Manual Pad: ua-cam.com/video/TNtnQheubq4/v-deo.html
can i plwas ask you how did you plan the angle of the transition?
@@andrearicci9189 you mean the curvature and radius of the slope part??
I nees thi because i dont have skate park
This would cost 0 $ because my dad Worshiper a wood working shop so he would get paid building this and he did
Nice. That's lucky.
Thanks you guys are so good at skateboarding and I hope I can be as good as you guys pls subscribe to my channel I gave you guys a shout out
how much did it cost
Very nice work! Thx for sharing👍
Cool ramp but where did you get the coping and steel?
Use the internet. I don’t know where you live or what places sell that stuff in that particular place. I got it from a random scrap steel yard
What exactly are the sides called?
Looks great! Not too steep and not too mellow. My parents bought me an OC 4ft quarter 10 years ago before they were big and I HATE everything about it. This is mint.
What angle of inclination does this Quater have?
sorry I can't answer that. The angle changes with the transition.
So then how do I know how long and how to cute the side pieces... smh
Thats what you decide
The top frame really should have 2x4 support beams/legs under it, not just a few screws put into the sides
what is the sizes plz
length and width
Handy design 101 out of 10 ign. Would recommend. nah dats gud
How many of each wood do I need
What are all the materials and instructions you had?
Sorry. I didn't have any instructions because it was an exact copy of a quarter i had previously built off camera about a year earlier. I don't have the exact measurements of the materials i used either because i just coppied the old one. This video was suppose to be a guideline on how to build it and not so much about the exact sizes of the build. If you use the imperial measurement system then you can go onto diyskate.com and find the exact sizes of materials that you need.
Where did u get the steel sheets for the bottom of the ramp
Steel Scrap Yard
How heavy is it
Did you get the plans from a website?
no
That looks like it will get boring after 2 days
Ok
i have the same cat griptape
I'm impressed