Це відео не доступне.
Перепрошуємо.
HABU \\ Building The Ultimate Tool Box
Вставка
- Опубліковано 26 жов 2019
- I wanted to build such a tool box since years, and finally I did it!
Have fun!!
Check out my sponsors for awesome tools:
Hikoki Powertools:
www.hikoki-pow...
Pferd Tools:
www.pferd.com
Matador Tools:
www.matador-we...
HABU's Tip Cup: www.paypal.me/...
Thank you!! And don't forget to: #thumbupordown #Subscribe & #Share
Disclaimer: This is NOT a instructional "step-by-step" "how to" video! It is just an inspiration for you, and also an advertising for my person and skills... Hassan Abu-Izmero(HABU)
Really nice toolbox. Just remember to ventilate it after using it outside in cold weather, otherwise condensation can make those nice tools rust.
Thank you
@@HABU Or just let it warm up without opening it so that the humidity can't reach the tools. Both solutions should work.
Very nice.
The problem is, when you show up to a job site, they might think you want to burn the place down.
😂
Was thinking the same thing...the only way to remodel this kitchen is burn it & start over lol
That’s just a warning in case they decide to mess around paying 😂
Lol
Hahahahahahaha
Hast du die ganze Werkstatt da rein bekommen 😂😂😂 echt Klasse man 👍👍👍
So fast 😂 Dankeschön!
Dude! What a cool project!!
Thank you very much 😎🤘🏼
You took a regular Jerry can and built something incredible. I really love this 👍🏾👏🏾
This appeals to me on a deep, obsessive attention to detail! 😄
Love the look!
Love the latch!
It's great 😊
Thank you very much 😉🤙🏼
Habu, du hast dich mal wieder selbst übertroffen 🤩🤩🤩
Dankeschön 😎🤙🏼
Very clever. You had my undivided attention. Excellent video. 👍🏻👍🏻
Thank you 😉
Your imagination and skills always impress. Just wow!
Thank you very much!
Стой! Высокое напряжение!
Порадовала надпись)))
Канистра тоже советская. Парень с Германии там много всего с советских времен.
@@hamburg040hh Эта канистра изначально разработка немецких специалистов, 30-х годов.
Platz perfekt ausgenutzt! Mega!
Danke 😉
Unglaublich!
Alles drin was man(n) braucht.
Sehr geil verarbeitet!
Dankeschön 😎
That's pretty slick. Now make one that can hold 4 cordless drills 😁
yeah that's what i was wondering where is the second with all your drills in it? he has bit just no drill.
That's sick. But that was a very random assortmenttof tools. Some woodworking tools. Along with a bfh and socket set
Random? Yes and no. There's no "ultimate" workbench nor "ultimate" toolset --- that's a complete illusion; there's what your specific jobs/interests require 80% of the time, at the moment, and the rest. So your assortment will be different from his, and from your own 5years from now... but easy to adjust & optimise for your public-of-one.
"Канистра для специалиста"😁. Отличная идея и не менее отличное воплощение!!! СУПЕР!!!👍👍👍
Way better than the Jerry can toolboxes on the web...really well done!!! More tools in there than most people know what to do with!!!
Thank you very much
Easily one of the coolest tool inventions I've seen this month! ;) I have been inspired to build something similar. Thanks Habu!
Thank you very much!
Wow, Your creativity goes on a higher level. Really GREAT IDEA. This toolbox can be very handy for an offraod truck owner - just with another set of tools inside :)
Thank you!
That is called perfection my men ! Keep making! I like your style too much! Greddings from Greece
WHO on earth could possibly thumbs down this video? This is a dope creation. Smh
Thank you!
Really cool tool box, Going to look good in a truck or jeep.
Did anyone else notice the shark push stick? 🦈
Wood eating shark do doo doo dooo dooo 😉🤣
😂
What horrible person puts that tune in my head!? GRGHGF.
Ooooh.... Let it gooooooo! Let it goooooooo!
Dads everywhere will have their revenge.
Wow! Thank you for the idea!
You‘re welcome bud!
Up with the very best! I wish I would have kept some but I will find them again and again! Richard
The finish carpenter on my job in NYC had his tools in a custom fitted cello case and doormen would let him through the lobby instead of frieght thinking he was giving lessons to some rich kid
You talkin' 'bout my shopmate Eric, from Thomas Rogers and Co., in Boston? Going back a few years, though. Give him my best!
In this case he's going to be tackled!
@@leehaelters6182
Nope. It was midtown Manhattan in '97, a guy called Garth from local 157.
I've seen somwthing similar since, a guitar case tricked out for cabinet installations
@@tommypetraglia4688, copy, thanks! I noticed a while back that Eric had published an article about this idea in one of the woodworking magazines.
I was going to say the only thing it's missing is the Maker knife and DiResta Ice Pick.
Then I realized those are EDC items, so obviously you have them 😎👌
Yes you’re right 😉
What is a “maker knife”?
@@charleshetrick3152 the maker knife is a cool utility knife by a UA-camr named Giaco Whatever. It's neat!!
Why would anyone want a diresta icepick? The dudes a clown
@@SH19922x Whoa dude, why so mad.
Sweet, nice, awesome, brilliant, Damn bro,and very impressive.
In ver.2 you can stick a roll or pack of shop towels of wet wipes into the lid that can be pulled through the spout.
Maybe it's just me, but I always need paper towels or baby wipes handy in the shop.
Great build! Very inspiring and really getting my brain going...
Alter ist das GEIL 😍😍😍😍 Ein Traum!!!!! 👍🏼👍🏼👍🏼👍🏼💪🏽💪🏽
Dankeschön 😎🤙🏼
I am completely impressed! It’s definitely the coolest toolbox I’ve seen. Well done.
Thank you very much!
Totally agree. Super cool and no wasted space. So great for travel as well. Thanks for sharing that awsome build!! :)
Hat’s off to your creativity. 👌👏👍
Thank you
За табличку "СТОЙ! Высокое напряжение" лайк!
Hi,
at first I thought: "He will not cut the beautiful canister!" But then he did it and built a really cool toolbox out of it! Unfortunately, when building something like this, you never know which tool you actually need on tour. But the selection was quite okay.
Greeting Poly
für den RAM! immer on board👍 geiles projekt🍀
Na klaro 😉 Dankeschön 😎🤙🏼
Schön und praktisch - so ein Werkzeugkasten in der Kiste ist immer klasse. 👍
Dankeschön 🤙🏼
Amazing !
Very well done 👍🏼
Peace of art !
That would be perfect for the hand tools of a kitchen cabinet installer.
Dude! I love it! You must have spent some time on the tool layout.
Thank you😉🤙🏼
FANTASTIC , WELL DONE , GREAT JOB .
Thank you!
Nice build 👍🏴🇬🇧
Unfortunately, it's a truism that any toolbox you can lift yourself is missing the tool you need. :-)
Not to worry. Drawers will attract more stuff.
Круто блин.Все компактно,аккуратно и самое главное всё что нужно 👍
Хер его знает, если увидят араба, идущего по улице с канистрой бензиновой... Ничего личного, но как-то это ооч подозрительно будет выглядеть. Где-нибудь в России, я думаю, он дооолго до объекта шёл бы, пока каждый мент его не остановит и не проверит. "А шо в канистре, что поджигать идём?". 😂😂😂
Very nicely done !!! Thanks for sharing your thoughts and videos, Rodney
Thank you
Very nice idea and realization, I like to give you a thumbs up !
Thank you😉
A lot of Jeep guys will be copying this for automotive tools while overlanding
Kevin Thomson especially since jeeps are always broken lol
And I'm a mopar tech, no they'll just keep calling when their shit breaks
I actually had that idea a while back. Have a few used army water cans. Problem is making it water tight. I like to use 50cal ammo cans for a center console in my crawlers. Also for storage. Works great.
@Bantham Nobilis You're not a jeep guy if your not using military surplus cans and such. What yr is your Jk?
Amazon
RAMPAGE PRODUCTS 86619 Red Universal Trail Can Utility/Tool Box
Put a couple roles of electrical tape and gas filler lid
very great job Habu.... it's an super charged Jerry Can.... congrats...
Thank you very much!
Hi Habu 👋👋👋 good to see you 🤝🤝🤝 good idea 👍 good job 👍 good project 👍👍👍
Thank you very much!
The Ring on top is a bit small, I'm afraid it's going to break 😂👍 nice job brother!
😂🤙🏼 Thank you!
That ring might be small to grab, but very strong. Not going to break
@@bpmunroe 😂😂😂👍👍👍
Sorry that ring will hold a engine block,. so pulling the wood up and out of the case is nothing even close.
@@jamesfournier2810 man that was sarcasm!?! Didnt you understand?
Can you shine light with a link on the rubber used around the sharp edges? Thanks! Superb ingenuity!
One thing you can try is to get some small rubber hose, 1\4" or so, cut one sideand it works just as well.
Try searching Amazon for edge grommet.
www.amazon.com/MATCC-Guards-Rubber-Protector-Protection/dp/B01BWKCUAO/ref=sr_1_6?keywords=car+trim&qid=1572691862&sr=8-6
Trim Lok
What a great use of a jerry can. We new needed something like that, now we want something like that. Great work!!!👍👍👍👍👍👍
Thank you very much!
Perfektes Geburtstagsgeschenk.
😁🤙🏼
СТОЙ! Высокое напряжение!!
Very cool but I would like to see one made for auto tools and offloading supplies.
Then make your own lol
The complete auto tool box would use a repurposed Maytag washing machine.
John Mays You just did! He showed step by step how to accommodate different tools. Same difference: just take different tools. Oh, and you have to get off the couch!
I'm glad to see the trolls are here too
He just showed us how to make one. Go make one.
You are hands down the coolest craftsman I have seen on youtube. Mad skills! Great job!
Yeah, love his sound track, buzz, bang, bang, saw saw, much better that some of the crappy music we have to put up with some times...
Well done! Really well done. Congrats!
Thanks!
You could ad some magnets to hold some of the tools in instead of having so many latches thereby freeing up some space maybe to put more tools.
Was there something wrong with that Jerry Can? Cause it kinda looks like you ruined a perfectly good water container.
that's exactly what he did. lol $75 jerry can. oh well the youtube views makes up for it. I saw a guy cut up a antique Disston handsaw for a knife blank lol. youtube man
Let's see, tens of millions of Jerry cans in the world and only one of these toolboxes. I think it'll be OK.
D.W. Dunn, and a fair few million of the tens of millions are likely not suitable for holding water any more. Being different and cutsie artistic is awesome, pointlessly ruining a useful tool is just infuriating. It’s not like there’s a whole industry dedicated to making tool boxes or anything.
D.W. Dunn and another thing, why waste the time and supplies to paint the drawer boxes? I make artsy bullshit too, I love me some black iron pipe lighting fixtures but I take steps to make sure the design doesn’t prevent the pipe later being used for its original purpose whilst also adhering to the NEC. When the apocalypse comes and I need to trade useful Black Iron Pipe components for ammo or food or safe passage through the forbidden zone I’m set, but I can’t see how a Jerry Can that used to hold potable water will be useful.
charles hetrick I get your point, I really do. When I go to a craft fair it's usually a nonstop cringe fest because the housewives there have raided their husband's tool stashes to paint hammers and wrenches and other useful objects. And don't get me started on old handsaws embellished with poorly painted barn scenes. That's a particular pet peeve of mine. But I just can't get worked up over this. It seems to me like he has traded one useful object for another object that is just as useful. Maybe even more so. Now I doubt such a showboat piece is going to see hard use in real life. But I don't see any great harm in it either way. And besides, it is still useful to hold water. Pouring it may be a bit tricky, of course. Bu it'll still hold some. LOL
Ganz starker „Haben-will-Faktor“!!! - sehr cool gemacht, sehr gute Detaillösungen. Spitze👍👍👍
Dankeschön 😎🤙🏼
clever design brother....fun project. thanks for sharing
Thank you!
Sir, may I suggest rare magnets.
It almost looks like you're making a HUGE Zippo lighter!
😂
Absolutely brilliant
What a nice work. Congratulations!
Thank you!
Seems like automotive tools would fit the theme better but still super cool.
Thank you!
Logic Bob
Typical lame response...
figured you’d show up sooner or later.
@@elliottalderson9349 WTF are you talking about?
Wow that's cool, but also heavy and over complicated.
Good quality content, not music added , just the sound of his tools very nice
Simply awesome 👍
Outstanding, except for the sad way to store drill bits
Maybe a little divider to dull them out... Wonderful work
one of those indexed plastic cases?
But the little files are wrapped up nice and tidy.
I wanted to comment on this too.
Just 3d print an insert. 5 minute job.
S
W
E
E
T
🤩
@Bantham Nobilis you're just jealous cuz you don't have the skills to make something like this and if you do have skills let's see you do a UA-cam video and make one that's even better the chances of that are very slim you're just a troll
Wonderful job my brother.! Congrat ..! Very good..!
Thank you very much!
Bonjour Hassan HABU c est une excellente invention , incroyable
Merci 😁
Все хорошо, но меня бы жаба задавила испортить новую канистру😨
Вот! Я тоже об этом подумал! Никакой жизненной необходимости портить отличную канистру НЕ БЫЛО!
Поддерживаю!
Тю. Ну испорти старую.
Испортил - это ни в этом случае .🤗
@@user-kd4to9kk6c не спорю с вами, у каждого свое мнение и понятие пользы от сделанного. И ипсользованного материала.
Never cut an old petrol canister with a grinder... Kaboom?!?!? 🙈
Also my first thought, but then I saw how shiny new his selection was.
I don't think that can has seen any petrol.
Endgeiles Teil und noch ein fetter Hingucker. TOP!
Danke 😎🤙🏼
That is a maze toolbox you made there .👍👍
Thanks😉
"Стой высокое напряжение" ????? откуда???
Может он живет где нибудь на территории бывшей СССР?
@@dmitriiprimerov1898 живёт в Германии, город Mannheim
От подписчика..)
SERIOUSLY cool build ! Thanks for sharing another awesome video & Happy Sunday
Thank you very much!
A well built and durable toolbox that will last longer than an average tool! Nice!
Thank you 😎🤙🏼
Exceptional work
Very creative. Well done.
Thank you
The best tool Box!!!! Awesome 👍
Thank you 😉🤙🏼
Super sweet design!
Thank you
This is awesome. Thank you for sharing!
Wahnsinn, ich bin sprachlos...
Respekt! 👍🏻
Dankeschön 😎🤙🏼
Beautiful job 👍👏
Thank you😎
Great tool box. You got skills !
Best editing ever ! No b.s talking quick to the point visual description !
Thank you!
sehr gut Hassan 😎
Out of this world, brilliant, thank you for sharing.
Amazing styles, techniques & skills. Thanks so much giving new smarter ways of sorting tools station. Great stuff
That is really very well done!
Thank you 😉🤙🏼
Nice project!
Very cool and creative .🙂
Πολύ Ωραία Εργαλειοθήκη !!! Very Good Tool Box !!!
Thank you very much
great idea! congratulations for your job!
Thank you 😎🤙🏼
It's fantastic 👌👌👌👌. Great build!
Thank you 😎🤙🏼
That toolbox is very cool. Thanks
Thank you
Wow Hasan sehr geile Toolbox 🧰 👍👍 schön auch wieder dich mit Holz arbeiten zu sehen ... mega mega mega
Vielen Dank 😎🤘🏼
Hello HABU, Unglaublich was Du da alles reinbekommst !
Vintage und so Modern ist einfach Geil 👍Danke tolles Video ! 🎯
Vielen Dank!
Hi Hassan !Einfach nur Top !😎👍
Dankeschön 😎🤙🏼